1. Product Overview
This handheld electric milk frother and egg beater is designed to simplify various kitchen tasks. It features a powerful motor with three-speed adjustment, a detachable mixing head for easy cleaning, and convenient Type-C fast charging. Ideal for creating rich milk foam for coffee, beating eggs, mixing complementary foods, and more.
Figure 1: Electric Milk Frother (Black and White models)
2. Setup and Assembly
- Unpacking: Carefully remove all components from the packaging. Ensure you have the main body, the mixing head (whisk), and the USB Type-C charging cable.
- Attaching the Mixing Head: Align the arrow on the mixing head with the groove on the head of the device. The arrows inside are opposite. Press down firmly to install the mixing head until it clicks securely into place.
- Initial Charge: Before first use, fully charge the device using the provided Type-C USB cable. Refer to the 'Charging' section for details.
Figure 2: Mixing Head Installation and Disassembly
3. Operating Instructions
- Power On/Off: Press the power button (indicated by a circular icon with a line) to turn the device on or off.
- Speed Adjustment: The device features three-speed settings. Press the power button repeatedly to cycle through low, medium, and high speeds. Indicator lights above the power button will show the current speed setting.
- Low Speed: Suitable for stirring egg liquid.
- Medium Speed: Ideal for mixing complementary foods or light frothing.
- High Speed: Best for frothing milk and whipping cream.
- Frothing Milk: Submerge the whisk end into the milk. Press the power button to start. Move the frother up and down gently to create foam. For best results, suggest heating the milk to approximately 50°C and frothing for 20-30 seconds for faster foam creation. If the foam is very thick, you can use a spoon to scoop it for latte art.
- Egg Beating/Mixing: Submerge the whisk end into the liquid you wish to beat or mix. Select the appropriate speed and operate until desired consistency is achieved.
Video 1: Demonstration of frother assembly, speed settings, and milk frothing.
Figure 3: Three-Speed Adjustment Feature
Figure 4: Tips for Optimal Milk Frothing
4. Charging
The device supports Type-C fast charging. Connect the provided USB Type-C cable to the charging port on the frother and to a suitable USB power source (e.g., wall adapter, computer USB port). The indicator lights may show charging status. Disconnect once fully charged.
Figure 5: Type-C Fast Charging Port
5. Maintenance and Cleaning
The frother is designed for easy cleaning. To clean:
- Disassembly: Ensure the device is turned off. Hold the mixing head and the main body separately with both hands and pull them apart to detach the mixing head.
- Cleaning the Mixing Head: Rinse the metal mixing head under running water immediately after use. For thorough cleaning, use mild soap and water. Ensure all milk or food residue is removed.
- Cleaning the Main Body: Wipe the main body with a damp cloth. Do NOT submerge the main body in water or other liquids, as this can damage the electronic components.
- Drying: Allow all parts to air dry completely before reassembling or storing.
6. Troubleshooting
- Device not turning on: Check if the device is charged. Connect it to the Type-C charger and allow it to charge for a period.
- Weak frothing/mixing performance: Ensure the mixing head is securely attached. Check the battery level and recharge if necessary. Make sure you are using the appropriate speed setting for your task.
- Mixing head detaches during use: Ensure the mixing head was installed correctly by aligning the arrows and pressing down firmly until it clicked.
7. Specifications
| Feature | Detail |
|---|---|
| Function | Stirring, Egg Beating, Milk Frothing |
| Type | Egg Tools (Egg Beaters) |
| Power Source | Rechargeable (Type-C USB) |
| Speed Settings | Three-speed regulation |
| Rated Power | 7W |
| Main Body Dimensions | Approximately 130mm (Length) x 27mm (Diameter) |
| Mixing Head Length | Approximately 120mm |
| Package Weight | 0.1 kg |
| Package Dimensions | 11cm x 11cm x 11cm |
Figure 6: Product Dimensions and Power Specifications
8. User Tips
- For optimal milk frothing, slightly warm your milk to around 50°C before frothing. This can help create richer, more stable foam in 20-30 seconds.
- If you desire very thick foam for latte art, use a spoon to scoop the foam from the top of your frothed milk.
- Always ensure the mixing head is fully and securely attached before operating to prevent accidental detachment.
- The device is USB rechargeable, making it convenient for use anywhere without needing disposable batteries.
9. Warranty and Support
For any product inquiries, technical support, or warranty claims, please refer to the seller's contact information provided at the point of purchase. Keep your purchase receipt as proof of purchase.
