1. Safety Instructions
Thank you for purchasing and using the MiLESEEY handheld laser distance meter. Please read this manual carefully and follow all instructions before use. Failure to do so may result in hazardous radiation exposure, electric shock, fire, or serious injury.
WARNING
- If the instrument malfunctions, is dropped, abused, or modified, especially if exposed to abnormal conditions, measurements may be inaccurate. Perform regular test measurements before, during, and after important measurements.
- This device complies with relevant standards and regulations. However, interference with other devices cannot be entirely ruled out.
Class 2 Laser Product
Direct observation of the laser beam with optical instruments (e.g., binoculars, telescopes) can pose a risk to your eyes. Avoid staring into the laser beam or pointing it at others, as it may cause injury.
Laser Classification
This device produces a visible laser beam emitted by the instrument. It is a Class 2 laser product that complies with the radiation safety requirements of IEC60825-1: 2014.

Laser warning label
WARNING (Repair)
Do not attempt to repair this product yourself. If damaged, please contact your local dealer or manufacturer, otherwise, you may lose your product warranty rights.
Waste Disposal: Protect the Environment!
Do not dispose of waste batteries with household waste. Please dispose of waste batteries at designated battery collection points. This product should not be disposed of with household waste. Please dispose of this product properly in accordance with national/regional regulations.
Scope of Responsibility
The company is not responsible for any damage caused by not operating the distance meter according to this manual, using third-party accessories, or self-modifying the distance meter.
2. Product Overview
The MiLESEEY D9 laser distance meter is a stylish and modern measuring device with a measurement range of up to 100m. Its sleek design offers a minimalist aesthetic. Featuring one-button operation, it provides convenient and accurate measurements. The device supports wireless Bluetooth transmission to a paired mobile application (APP), allowing you to easily obtain and manage all measurement data.

MiLESEEY D9 Laser Distance Meter
Key Features:
- 100M High Precision & Versatility: 0.2-100m range, ±(2.0mm+5*10-5D) accuracy, 20+ measurement modes (distance, area, volume, Pythagorean, shape-specific calculations) for construction, decoration, and engineering.
- Bluetooth & Large Font Display: Sync data to your phone via Bluetooth; 2.4" IPS screen with large font mode and Chinese/English voice alerts for clear, easy operation.
- Type-C Rechargeable & Long Battery Life: 1800mAh lithium-ion battery, Type-C fast charging, auto power-off (180s) and laser shutoff (30s) for energy efficiency.
- Smart Alignment & Portability: Auto horizontal/vertical measurement, level vial, and laser reference line for accurate positioning; 170g lightweight body for easy carry.
- Class II Laser Safety: 630-670nm <1mw laser, Class II safety rating, and multiple reference points for reliable, worry-free use.
3. Getting Started
Important Notes:
- Operate the product strictly according to the instructions.
- Do not use the device beyond its specified limits.
- Do not use tools (e.g., screwdrivers) to open or modify the product.
- Do not use accessories not explicitly approved by the manufacturer.
- Do not intentionally cause glare to others.
- Do not measure in areas without adequate safety measures, such as roads or construction sites.
- Do not perform any measurements that could cause harm.
- Do not point the device directly at the sun.
- Do not use this product near gas stations, chemical facilities, potentially explosive environments, or areas undergoing blasting operations.
- Do not use this product near medical equipment.
- Do not operate this product on an aircraft.
Appearance Introduction
Familiarize yourself with the components of your D9 laser distance meter:

MiLESEEY D9 with key features highlighted
- Measure/Power On/Confirm Button: Short press to measure, long press to enter continuous measurement. When powered off, long press to power on. In settings, short press to switch sub-states.
- Function/Left/Up Button
- Settings/Right/Down Button
- Right Laser Line
- Back/Power Off Button
- Screen
- Type-C Charging Port
Accessories

Included accessories: 1x D9 device, 1x Case, 1x Lanyard, 1x Type-C cable, 1x Chinese user manual (contact customer service for English manual).
4. Charging the Battery
The D9 is equipped with an 1800mAh rechargeable lithium-ion battery. Please follow these guidelines for charging:
- Do not allow children to play with the battery or charger.
- Before each use, carefully inspect the charger, cable, and plug for any signs of damage.
- If any damage is detected, do not use the charger. Damaged chargers, cables, or plugs significantly increase the risk of electric shock.
- Use the provided Type-C cable and a compatible charger to charge the device.
5. Operation
Icon Introduction
The display shows various icons to indicate the device's status and current mode:
- Measurement Mode
- Bluetooth Transmission
- Battery Level
- Digital Level Bubble (displays gravity tilt angle)
- Measurement Reference
- Measurement Data
- Current Measurement Data/Result Line
Settings Menu
To access the settings menu, power on the device and short press the Settings button. Use the Function/Left/Up and Settings/Right/Down buttons to navigate, and the Measure/Power On/Confirm button to select or confirm.
5.1. Bluetooth Connection
Device Side:
- Power on the device, short press Settings to enter the settings interface. Navigate to the Bluetooth option.
- Short press Measure/Power On to select ON or OFF (white icon indicates ON, gray indicates OFF).
- After selection, short press Back to exit. If the Bluetooth icon flashes, it means it's not connected. A solid icon means it's connected.
Mobile Phone Side:
- Open Bluetooth on your phone and click to connect to the product in the APP. Once connected, the Bluetooth icon in the APP will turn blue, and the device's Bluetooth icon will be solid.
- You can then use the APP to transfer data. The device requires the "ZhihuXing" APP. Please download it in advance.
APP Download: Search for "ZhihuXing" in your app store (iOS) or Android app markets. For iOS users, download only from the Apple App Store. For Android users, download from major app markets or the official ZhihuXing website.
APP VIP Code: After confirming receipt, contact customer service and provide your registered phone number to receive a VIP activation code (only for Bluetooth-enabled products).

QR code for ZhihuXing APP download
5.2. Unit Switching
- Power on the device, short press Settings to enter the settings interface. Navigate to the Unit option.
- Short press Measure/Power On to switch and select the desired unit. After selection, short press Back to exit.
The D9 supports 6 unit options: meters (m), centimeters (cm), millimeters (mm), feet (ft), inches (in), and feet+inches (ft+'').

Unit switching display
5.3. Measurement Reference
- Power on the device, short press Settings to enter the settings interface. Navigate to the Measurement Reference option.
- Short press Measure/Power On to switch and select the desired reference point. After selection, short press Back to exit.
- Rear Reference: Measures distance from the rear of the device (standard setting).
- Laser Line Reference: Measures distance from the laser line.
- Front Reference: Measures distance from the front of the device.
- Tripod Thread Hole Reference: When using a tripod, measures distance from the center of the tripod thread hole.
5.4. Large Font Mode
- Power on the device, short press Settings to enter the settings interface. Navigate to the Large Font Mode option.
- Short press Measure/Power On to toggle ON or OFF (white icon indicates ON, gray indicates OFF). After selection, short press Back to exit.

Large Font Mode display
5.5. Display Orientation
- Power on the device, short press Settings to enter the settings interface. Navigate to the Display Orientation option.
- Short press Measure/Power On to switch between normal or inverted display. After selection, short press Back to exit.
5.6. History Records
- Power on the device, short press Settings to enter the settings interface. Navigate to the History Records option.
- Short press Measure/Power On to enter the history records interface.
- Short press Measure/Power On to scroll through records. (You can also use the Up/Down buttons to navigate).
- Long press Measure/Power On to bring up the delete menu.
- Short press Function to switch between deleting a single record or all records. Short press Measure/Power On to confirm.
- Short press Back to exit.
5.7. Voice Broadcast
- Power on the device, short press Settings to enter the settings interface. Navigate to the Voice Broadcast option.
- Short press Measure/Power On to switch between turning off sound, turning on sound, Chinese voice broadcast, or English voice broadcast. After selection, short press Back to exit.
5.8. Screen Rotation
- Power on the device, short press Settings to enter the settings interface. Navigate to the Screen Rotation option.
- Short press Measure/Power On to toggle ON or OFF (white icon indicates ON, gray indicates OFF). After selection, short press Back to exit.

Black/White background display options
5.9. Timed Measurement
- Power on the device, short press Settings to enter the settings interface. Navigate to the Timed Measurement option.
- Short press Measure/Power On to toggle ON or OFF (5s/3s). After selection, short press Back to exit.
5.10. Vibration
- Power on the device, short press Settings to enter the settings interface. Navigate to the Vibration option.
- Short press Measure/Power On to toggle ON or OFF (white icon indicates ON, gray indicates OFF). After selection, short press Back to exit.
5.11. Offset Setting
- Power on the device, short press Settings to enter the settings interface. Navigate to the Offset Setting option.
- Short press Measure/Power On to enter the offset setting interface.
- Short press Function to cycle through digits; short press Settings to move the cursor. After setting, short press Back to exit.
5.12. Digital Level Bubble
- Power on the device, short press Settings to enter the settings interface. Navigate to the Digital Level Bubble option.
- Short press Measure/Power On to enter the digital level bubble interface. After selection, short press Back to exit.
Video demonstrating the Digital Tilt Sensor and Digital Level Bubble functionality.
Measurement Modes
5.13. Single Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Single Measurement icon.
- Short press Measure/Power On to confirm and enter the single measurement mode.
- After positioning the device, short press Measure/Power On. The current measurement data will be displayed in the result line.
(Note: Upon power-on, the device defaults to single measurement mode.)
5.14. Continuous Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Continuous Measurement icon.
- Short press Measure/Power On to confirm and enter the continuous measurement mode.
- Move the rangefinder left/right or up/down. Short press Measure/Power On to stop the measurement. The screen will display the current measurement value, MIN (minimum value), and MAX (maximum value). Choose the maximum or minimum value according to actual needs.
(Alternative: Long press the Measure/Power On button to directly enter continuous measurement mode.)

Stake-out and Continuous Measurement
5.15. Area Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Area Measurement icon.
- Short press Measure/Power On to confirm and enter the area measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the first side length; short press Measure/Power On again to measure the second side length.
Finally, the perimeter (C) and area data will be automatically calculated and displayed.

Area and Single Measurement
5.16. Volume Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Volume Measurement icon.
- Short press Measure/Power On to confirm and enter the volume measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the first side length; short press Measure/Power On again to measure the second side length; short press Measure/Power On a third time to measure the third side length.
Finally, the volume data will be automatically calculated and displayed.

Trapezoidal Area and Volume Measurement
5.17. Triangle Area Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Triangle Area Measurement icon.
- Short press Measure/Power On to confirm and enter the triangle area measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure side 1; short press Measure/Power On again for side 2; and a third time for side 3.
Finally, the triangle area data will be automatically calculated and displayed.
5.18. Circular Area Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Circular Area Measurement icon.
- Short press Measure/Power On to confirm and enter the circular area measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the diameter.
Finally, the circumference (C) and circular area data will be automatically calculated and displayed.
5.19. Cylinder Volume Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Cylinder Volume Measurement icon.
- Short press Measure/Power On to confirm and enter the cylinder volume measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the diameter; short press Measure/Power On again to measure the height.
Finally, the cylinder volume data will be automatically calculated and displayed.

Circular Area and Automatic Vertical Measurement
5.20. Continuous Area Measurement
Continuous area measurement is suitable for summing the areas of several individual surfaces that share a common height.
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Continuous Area Measurement icon.
- Short press Measure/Power On to confirm and enter the continuous area measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the common height (h); then short press Measure/Power On to measure the length of the first wall (L1). The area will be displayed in the result line.
- Short press Measure/Power On again to measure the length of the second wall (L2). The latest length will be displayed on the 3rd line of measurement data, and the total length will be displayed on the 2nd line. The sum of the two wall areas will be displayed in the result line.
(Similarly, you can measure the length of the third wall to get the sum of three wall areas.)
5.21. Automatic Horizontal Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Automatic Horizontal Measurement icon.
- Short press Measure/Power On to confirm and enter the automatic horizontal measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the hypotenuse, vertical distance, and horizontal distance. These will be displayed on the screen sequentially from top to bottom.
5.22. Automatic Vertical Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Automatic Vertical Measurement icon.
- Short press Measure/Power On to confirm and enter the automatic vertical measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the first hypotenuse; short press Measure/Power On again to measure the second hypotenuse. After measurement, the required vertical height will be displayed in the result line. The hypotenuses "①", "②" and angle "α" will be displayed in the measurement data line.
(Note: Ensure the rear edge of the measuring tool remains in the same position during each measurement.)

Measuring inaccessible areas like ceilings or beams
5.23. Trapezoid Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Trapezoid Measurement icon.
- Short press Measure/Power On to confirm and enter the trapezoid measurement mode.
- Follow the red measurement line prompts. Short press Measure/Power On to measure the first side length; short press Measure/Power On again to measure the second side length.
Finally, the angle (α) between the diagonal and the horizontal side, and the diagonal length (L) will be automatically calculated and displayed in the result line.
5.24. Stake-out Measurement
- After powering on the device, short press the Function button to enter the function selection interface. Navigate to the Stake-out Measurement icon.
- Short press Measure/Power On to confirm and enter the stake-out measurement mode.
- Short press Function to cycle through digits; short press Settings to move the cursor. Set the A value.
- Short press Function to switch to setting the B value. (Input method is the same as for A value).
- After inputting A and B values, short press Measure/Power On to start stake-out.
6. Troubleshooting
All errors or malfunctions will be displayed as a code. The table below explains the meaning of the codes and their solutions.
| Code | Reason | Solution |
|---|---|---|
| 204 | Calculation error | Operate the product according to the user manual. |
| 208 | Overcurrent | Contact your distributor for support and guidance. |
| 220 | Low battery | Charge the battery. |
| 255 | Weak signal or long measurement time | Use a target plate or measure on a white surface. |
| 256 | Strong signal | Use a target plate, avoid aiming the device at strong light sources. |
| 261 | Out of measurement range | Measure within the specified range. |
| 500 | Hardware error | Try turning off the device and then turning it back on. If the symbol persists after multiple attempts, please contact your dealer for further assistance. |
7. Specifications
| Parameter | Value |
|---|---|
| Range | 0.2-100m (0.5-330ft) |
| Accuracy | ±(2.0mm+5*10-5D) |
| Single Measurement | Yes |
| Continuous Measurement | Yes |
| Area Measurement | Yes |
| Volume Measurement | Yes |
| Triangle Area Measurement | Yes |
| Circular Area Measurement | Yes |
| Cylinder Volume Measurement | Yes |
| Continuous Area Measurement | Yes |
| Automatic Horizontal Measurement | Yes |
| Automatic Vertical Measurement | Yes |
| Trapezoid Measurement | Yes |
| Stake-out Measurement | Yes |
| Bluetooth | Yes |
| Units | m, cm, mm, ft, in, ft+'" |
| Reference | Front/Rear/Laser Line/Tripod Thread Hole |
| Screen | 2.4" IPS |
| Screen Rotation | Yes |
| History Records | 35 groups |
| Offset Setting | Yes |
| Timer | 3s, 5s, Off |
| Display Orientation | Yes |
| Large Font Mode | Yes |
| Voice | On/Off/Chinese/English |
| Vibration | Yes |
| Digital Level Bubble | Yes |
| Auto Power Off | 180s without operation |
| Auto Laser Off | 30s without operation |
| Laser Class | Class II |
| Laser Type | 630-670nm, <1mW |
| Operating Temperature | 0°C ~ 40°C |
| Battery Type | 1800mAh rechargeable Li-ion |
| Charging Interface | Type-C |
| Dimensions | 118mm*48.5mm*24.5mm |
| Weight | 170g |
8. Warranty and Support
Warranty Information
MILESEEY offers a 30-day return and refund guarantee, a 12-month warranty, and lifetime technical support. If you have any questions or issues, please do not hesitate to contact us.
Contact Us
Shenzhen Mileseey Technology Co., Ltd.
- Office Address: 36F, Block A, Tanglangcheng Plaza (West District), 3333 Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China.
- Factory Address: Building 2, 2-3F, Tonghu Ecological Smart Park, 137 Chenjiang 6th Road, Zhongkai High-tech Zone, Huizhou City, Guangdong Province, China.
- Contact Phone: 0755-86329055 / 0752-3222711
- Website: www.mileseey.com
- Email: service@mileseey.com
We strive to respond to your inquiries within 24 hours.
Copyright Notice
Product specifications are subject to change without prior notice. All rights of interpretation belong to Shenzhen Mileseey Technology Co., Ltd. All trademarks, product images, technical parameters, and copyrights are owned by Shenzhen Mileseey Technology Co., Ltd. Infringement is strictly prohibited.