OPcom V1.99

Contents

OPcom V1.99 OBD2 Diagnostic Tool for Opel User Manual

Model: V1.99

1. Introduction

The OPcom V1.99 is a PC-based OBD2 diagnostic tool designed for Opel vehicles. Featuring a PIC18F458 chip and FTDI FT232RL chip, this tool provides stable and reliable communication for vehicle diagnostics. It supports a wide range of Opel cars, including newer models with CAN-BUS based diagnostics such as Vectra-C, Astra-H, and Zafira-B, up to model year 2014. This manual will guide you through the setup, operation, and maintenance of your OPcom V1.99 diagnostic tool.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 × OPcom Diagnostic Interface (V1.99)
  • 1 × USB Cable
  • 1 × Software and Drivers CD
OPcom V1.99 diagnostic tool, USB cable, and software CD
Figure 2.1: OPcom V1.99 Package Contents

3. Specifications

FeatureDescription
Model NameOPcom V1.99
Hardware VersionV1.99 (also compatible with V1.65, V1.7, V1.78)
Software VersionV2014
ChipsetPIC18F458, FTDI FT232RL
Supported VehiclesAlmost all Opel cars up to year 2014 (e.g., Vectra-C, Astra-H, Zafira-B)
Supported ProtocolsCAN-BUS, ISO9141, KW81, KW82, KWP2000
Connection InterfaceOBD2 (10-16 Pin), USB to PC
Operating SystemWindows XP, Windows 7 (32-bit recommended)
Voltage12V
Item Weight0.2 kg
Dimensions (L×W×H)5cm × 6cm × 5cm (approximate)
CertificationsCE, UL
Comparison table of OP COM versions and their features
Figure 3.1: OPcom Device Version Comparison

4. Setup Instructions

4.1 System Requirements

  • Operating System: Windows XP or Windows 7 (32-bit version recommended). Ensure your anti-virus program is temporarily disabled during installation and operation to prevent interference.
  • Available USB port.

4.2 Software Installation

  1. Insert the provided Software and Drivers CD into your computer's CD-ROM drive.
  2. Follow the on-screen instructions to install the V2014 software and necessary drivers.
  3. If the CD is unreadable or damaged, please contact the seller for a download link to the software.
  4. After installation, restart your computer if prompted.

4.3 Connecting the Device

  1. Locate your vehicle's OBD2 port (typically under the dashboard on the driver's side).
  2. Connect the OPcom diagnostic interface to the vehicle's OBD2 port.
  3. Connect the USB cable from the OPcom interface to an available USB port on your computer.
  4. The 'Power' indicator light on the OPcom device should illuminate, indicating it is receiving power.
Diagram showing connection from car OBD2 port to OPcom device and then to a Windows PC via USB
Figure 4.1: Connection Diagram
OPcom device connected to a laptop via USB cable
Figure 4.2: Device Connected to PC

5. Operating Instructions

Once the software is installed and the device is connected, you can begin diagnosing your Opel vehicle.

5.1 Launching the Software

  1. Double-click the OPcom software icon on your desktop to launch the application.
  2. From the main menu, you can select various options such as 'Diagnostics', 'Replay previously recorded live data', 'Settings', or 'About the program'.
OPcom software main menu showing Diagnostics, Replay, Settings, About, Exit options
Figure 5.1: OPcom Software Main Menu

5.2 Performing Diagnostics

  1. Select 'Diagnostics' from the main menu.
  2. The program will prompt you to select the vehicle's model year and type. You can choose from a list of years (e.g., 1987-2014).
  3. The diagnostic interface acts as a multiplexer, automatically selecting the appropriate pins (PIN3, PIN7, PIN8, PIN12 for Serial Link; PIN6-PIN14, PIN3-PIN11, PIN1 for output tests) for communication with the vehicle's control units.
  4. The software supports various control units including Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit.
OPcom software Diagnostics Window showing a list of model years for selection
Figure 5.2: Selecting Vehicle Model Year

5.3 Reading and Clearing Fault Codes

  • The software allows you to read out and clear fault codes from various control modules.
  • Fault codes are displayed with full status information (Present, Not present, Intermittent).
  • You can print, save, or copy fault codes to other applications.
OPcom software screenshot displaying a list of stored fault codes with detailed descriptions
Figure 5.3: Fault Code Display

5.4 Live Data and Output Tests

  • View live data from many control modules, selecting up to 8 parameters simultaneously. The sample rate varies depending on the communication protocol (e.g., CAN-BUS is very fast).
  • Perform output tests on various controllers.
  • Supported CAN-BUS types include HSCAN (Dual-wire, High Speed, 500 kbps), MSCAN (Dual-wire, Medium Speed, 95 kbps), and SWCAN (Single-wire, Low Speed, 33.3 kbps).

6. Troubleshooting

  • Software/Driver Installation Issues: Ensure your anti-virus software is temporarily disabled during installation. If you encounter issues installing drivers on Windows 10, note that the tool is primarily designed for Windows XP and 7 (32-bit). You may need to search for compatible drivers online or use a supported operating system.
  • Software Malfunction: If the program doesn't work as expected, try closing and restarting the application.
  • CD Unreadable/Damaged: If the included software CD is unreadable or damaged, contact the seller for a digital download link.
  • No Communication with Vehicle: Double-check all connections (OBD2 port, USB cable). Ensure the vehicle's ignition is on. Verify that the correct vehicle model and year are selected in the software.
  • Compatibility with Newer Models: The tool is specified to work with Opel models up to year 2014. It may not fully support newer models (e.g., Opel Insignia 2016) for all functions.

7. User Tips

  • Key Programming: Users have successfully used this tool to program new flip keys for compatible Opel/Vauxhall models (e.g., 2010 Vauxhall Astra H).
  • Software Restart: If the program behaves unexpectedly, a quick restart of the software often resolves minor glitches.
  • Antivirus: Always disable your antivirus software before installing and running the OPcom software to prevent conflicts.

8. Maintenance

  • Keep the diagnostic tool and cables clean and dry.
  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to open or modify the device, as this will void any potential warranty.

9. Warranty and Support

For any technical support, warranty claims, or inquiries regarding software updates, please contact the seller directly. Refer to your purchase documentation for specific warranty terms and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.