CEM DT-8851, DT-8852

Contents

CEM DT-8851 / DT-8852 Digital Sound Level Meter User Manual

Professional Analog Decibel USB AC/DC Output 130db Digital Sound Level Meter With Datalogger Noise DB Meter

1. Introduction

This manual provides detailed instructions for the safe and effective operation of the CEM DT-8851 and DT-8852 Digital Sound Level Meters. These professional instruments are designed for accurate measurement of sound levels in various environments. The DT-8852 model includes advanced datalogging capabilities.

Both units conform to the IEC61672-1 Class 2 standard for Sound Level Meters, ensuring reliable and precise measurements.

Front view of CEM DT-8851 Sound Level Meter
Figure 1: Front view of the CEM DT-8851 Sound Level Meter.

2. Key Features

  • Conforms to IEC61672-1 Class 2 for Sound Level Meters.
  • MAX & MIN measurements for capturing peak and lowest sound levels.
  • Overrange and Underrange display indicators.
  • A & C Weighting for different frequency response characteristics.
  • FAST & SLOW response time settings.
  • Analog AC/DC outputs for connection to frequency analyzers or X-Y shaft recorders.
  • Datalogger function (DT-8852 only) for recording measurements.
  • Adjustable Alarm-Levels (DT-8852 only) for threshold alerts.
  • Memory for 32700 readings (DT-8852 only).

3. Device Overview

The CEM Sound Level Meter features a clear digital display, intuitive button controls, and a detachable microphone. The main controls include buttons for REC (Record), SETUP, FAST/SLOW response, A/C weighting, MAX/MIN, HOLD, and LEVEL adjustment. A power button is located at the bottom.

Angled view of CEM DT-8851 Sound Level Meter, highlighting buttons and display
Figure 2: Angled view of the DT-8851, showing control buttons and display.
Angled view of CEM DT-8852 Sound Level Meter, highlighting buttons and display
Figure 3: Angled view of the DT-8852, showing control buttons and display.

4. Setup

4.1 Battery Installation

Open the battery compartment cover on the back of the unit. Insert the required batteries (typically AAA or AA, refer to the battery compartment for exact type and polarity) ensuring correct orientation. Close the battery compartment securely.

4.2 Microphone Attachment

Ensure the 1/2 inch electret condenser microphone is securely attached to the top of the unit. A foam windscreen is usually provided and should be placed over the microphone to minimize wind noise during outdoor measurements.

4.3 Powering On

Press the power button (usually located at the bottom of the device) to turn on the sound level meter. The display will illuminate and show the current sound level reading.

5. Operation

5.1 Basic Measurement

Once powered on, the device will immediately begin measuring sound levels. The current decibel reading will be shown on the main display.

5.2 A & C Weighting

Press the 'A/C' button to toggle between A-weighting and C-weighting. A-weighting is commonly used for environmental noise measurements as it approximates the human ear's response. C-weighting provides a flatter response, suitable for measuring peak sound pressure levels or noise from machinery.

5.3 FAST & SLOW Response

Use the 'FAST/SLOW' button to select the desired response time. 'FAST' (125ms) is suitable for capturing rapidly changing noise levels, while 'SLOW' (1s) provides a more averaged reading for stable noise sources.

5.4 MAX & MIN Measurements

Press the 'MAX/MIN' button to enter MAX/MIN mode. The display will show the maximum or minimum sound level recorded since entering this mode. Press again to cycle through MAX, MIN, and normal measurement modes.

5.5 Level Range Selection

Press the 'LEVEL' button to cycle through different measurement ranges: LO (30dB~80dB), Med (50dB~100dB), Hi (80dB~130dB), and Auto (30dB~130dB). Select the appropriate range to ensure accurate readings and prevent overrange/underrange indications.

5.6 Datalogger Function (DT-8852 Only)

The DT-8852 model features a datalogger. Press the 'REC' button to start/stop data recording. Refer to the specific instructions for setting logging intervals and downloading data via USB to a PC.

5.7 Adjustable Alarm-Levels (DT-8852 Only)

The DT-8852 allows setting adjustable alarm levels. Consult the 'SETUP' menu for configuring high and low sound level thresholds that trigger an alert.

5.8 Analog AC/DC Outputs

The device provides AC=1Vrms and DC=10mV/dB analog outputs. These can be used to connect the sound level meter to external recording devices, frequency analyzers, or X-Y shaft recorders for further analysis. Use appropriate cables and ensure correct connection polarity.

Diagram illustrating features, display, ports, and application scenarios of the sound level meter
Figure 4: Overview of features, display, ports, and typical applications.

6. Maintenance

6.1 Cleaning

Wipe the unit with a dry, soft cloth. Do not use abrasive cleaners or solvents. Keep the microphone free from dust and debris.

6.2 Storage

When not in use for extended periods, remove the batteries to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

6.3 Battery Replacement

Replace batteries when the low battery indicator appears on the display. Always use fresh batteries of the specified type. Dispose of old batteries responsibly.

6.4 Calibration

For professional applications requiring high accuracy, periodic calibration by a certified laboratory is recommended to ensure the instrument maintains its specified performance.

7. Troubleshooting

7.1 'Overrange' or 'Underrange' Display

If the display shows 'Overrange' or 'Underrange', the current sound level exceeds or falls below the selected measurement range. Adjust the 'LEVEL' range accordingly until a valid reading is displayed.

7.2 No Display or Incorrect Readings

  • Check battery levels and replace if necessary.
  • Ensure the microphone is securely attached and free from obstructions.
  • Verify that the unit is powered on.
  • If the issue persists, contact customer support.

8. Specifications

ParameterValue
Standard appliedIEC61672-1 Type 2, ANSI S1.4 Type2
Accuracy±1.4dB
Frequency range31.5HZ ~ 8KHZ
Dynamic range50dB
Level rangesLO:30dB~80dB Med:50dB~100dB
Hi:80dB~130dB Auto:30dB~130dB
Time weightingFAST ( 125mS ), SLOW ( 1s )
Microphone1/2 inch electret condenser microphone
Resolution0.1dB
Display Update2 times/sec
Analog outputAC/DC outputs, AC=1Vrms, DC=10mV/dB

9. User Tips

  • Check Package Contents: Upon receiving your sound level meter, verify that all expected accessories, such as a carrying bag or tripod (if applicable to your purchase), are included.
  • Professional Calibration: For applications requiring certified accuracy, especially in regulatory or legal contexts, ensure your device has a valid calibration certificate or arrange for periodic professional calibration.
  • Environmental Considerations: When taking measurements, be aware of environmental factors like wind, humidity, and temperature, which can affect accuracy. Use the foam windscreen provided for outdoor measurements.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.