1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Junsun X7 Series Car Radio. The Junsun X7 Series is an advanced multimedia system designed specifically for the Honda Accord 7 (2003-2008) models, featuring a high-resolution 2K QLED display, AI voice control, wireless CarPlay and Android Auto compatibility, and a powerful Octa-core processor for a seamless in-car entertainment experience.
Please read this manual thoroughly before using the device to ensure proper functionality and safety. Keep this manual for future reference.
2. Safety Warnings and Disclaimer
For your safety, it is advisable not to watch video or operate the machine while driving. Always adjust the volume to an optimum level. Before operating, carefully read and understand all safety instructions and warning signals in this manual.
- Ensure safety on the road at all times.
- If you encounter difficulty operating the machine, stop the car safely before attempting to use it.
- Keep the machine out of reach of children to prevent injury or damage.
- Adhere to all traffic rules when using GPS navigation.
- Do not operate the machine in restricted areas such as petrol stations, wine refineries, or areas with strong electromagnetic obstruction.
- Do not install, maintain, or repair the machine yourself with the power on. Installation and repair should only be performed by personnel with professional training and experience in electronic devices and automotive parts.
- Avoid installing or storing the machine, especially the LED display screen, directly under sunlight or near hazardous substances. During installation, ensure no direct contact with the air-conditioner's ventilation duct, as this can damage the machine, the car, or cause injury.
- Do not use sharp objects to scratch or press the display screen vigorously, as this may damage it.
- Do not expose the machine to humid weather or direct contact with liquid to prevent fire or electrical hazards.
- The machine supports only one 12mm CD at a time. Do not insert 8mm CDs or other objects into the machine.
Important Note:
- If you have a diesel car, this product is not supported.
- Information on outside temperature and car type cannot be displayed.
- If your original car radio has a large screen, there might be gaps at the bottom after installation.
3. Package Contents
The standard package for the Junsun X7 Series Car Radio typically includes the following items:
- Junsun X7 Series Car Radio Unit
- Accord 7 Frame (specific to Honda Accord 7 2003-2008)
- Power Cable
- USB Cable
- GPS Module
- Video Input Cable
- 4G Module (if applicable to model variant)
- 4G SIM Cable (if applicable to model variant)
- Instruction Manual (this document)
- RCA Cables (may vary based on package selected)
Please check all items upon unboxing. If any accessories are missing or damaged, contact customer service.
4. Specifications
The Junsun X7 Series Car Radio comes in various configurations. Below are the general specifications and a comparison table for different models:
| Feature | Description |
|---|---|
| Brand Name | Junsun |
| Operating System | Android 12 |
| Processor Type | Octa-core A55 (X7 MAX, X7 PRO, X7 4G), Quad-core A7 (X7 WIFI) |
| Processor Speed | 1.6Ghz (Octa-core), 1.3Ghz (Quad-core) |
| RAM | 2GB, 4GB, 6GB (depending on model) |
| ROM | 32GB, 64GB, 128GB (depending on model) |
| Display Size | 10.33 inch, 11.5 inch, 13.1 inch (QLED G+G Full-Fit Screen) |
| Resolution | 1920*1200 (X7 MAX), 2000*1200 (X7 PRO), 720*1600 (X7 4G/WIFI) |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Max External Memory | 128G |
| Interface | USB, RCA |
| Special Features | Built-In Speaker/Microphone, WiFi function, Steering Wheel Control, 3G/4G Network Support, Can-Bus Support, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified/Traditional), Arabic, Irish, Estonian, Belarusian, Bulgarian, Polish, Danish, German, Russian, French, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Lithuanian, Romanian, Norwegian, Portuguese, Japanese, Swedish, Slovak, Slovenian, Thai, Turkish, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Italian, English |
| Online Radio | Support, stable signal and rich content |
| AI Voice Control | Support for Honda Accord 7 2003-2008 |
| Wireless CarPlay/Auto | Support for Honda Accord 7 2003-2008 |
| GPS Navigation Map | Built-in offline map, free update |
| Original Radar Displaying | Support for Honda Accord 7 2003-2008 |
| Support for Netflix | Support apk installation |
| RDS | Support for Honda Accord 7 2003-2008 |
| DAB+ | Support (requires additional module) |
| ADAS function | Support (requires DVR) |
| AV-OUT | Need converter |
5. Setup and Installation
5.1 Pre-Installation Notes
- If some of your car's connectors are not compatible with the Android device accessories, ignore them. Original car functions (e.g., built-in microphone, GPS module) may already be integrated into the Android device, making original connectors unnecessary.
- If a specific accessory is not included in your package, it means your car model does not require it. Ignore the corresponding connector and proceed with the remaining steps.
- If the radio is working properly, do not attempt to restore factory settings or update the firmware. This can lead to software loss or invalid preset information, causing malfunction.
- For unresolved issues, contact Junsun Store online customer service.
5.2 Wiring Diagrams and Connections
Refer to the following diagrams for proper wiring and connections. For a comprehensive wiring diagram, please consult the full user manual PDF available at Junsun User Manual (PDF).
The rear panel includes ports for radio antenna, GPS antenna, 4G antenna, USB, RCA, and Canbus connections. Ensure all cables are securely connected.
This diagram illustrates the general layout of the main cables. Due to rapid product updates, the exact order of interfaces on the back of your product may differ, but the wiring method for sockets remains consistent.
RCA Cable Definition:
- AMP Control Cable
- Fan, Connect the fan interface
- AUX RIN, Audio Input Right
- AUX LIN, Audio Input Left
- RCA FR, Audio Output Right
- RCA FL, Audio Output Left
- Mic, Microphone Port
- AUX Out, Video Output
- Sub, Subwoofer Output
- AUX VIN, Video Input
- AUX VIN2, Video Input
- 4G SIM
Rear View Camera Connection:
- Black cable (2) connects to the backup light "+".
- Red cable (1) connects to the backup light "-".
- The reversing detection cable (brown color) connects to the red cable (3) extending from the video input cable.
- Cable (5) does not need to be connected.
If your cable package includes a yellow connector (figure 1), connect it according to figure 2 (refer to the full PDF manual for visual aid).
Canbus Connection:
If your accessories include a Canbus box, connect it to the power cable. Both the Canbus box and the 8-pin plug on the power cable need to be connected to the device. Ensure you are connected to the network before selecting a protocol, as CAN protocol information cannot be obtained without a network connection.
WARNING: Do not insert the white plug of the CANBUS into the 20-pin RCA socket. Incorrect connection will damage the device immediately upon powering on.
5.3 GPS Antenna Installation
Install the GPS antenna on the dashboard or rear shelf, on a leveled surface facing the sky to minimize radio wave blockage. Tempered glass or tint may weaken the signal, so consider installing the antenna outside the vehicle.
- Before affixing, clean the designated surface. Tear off the tape and press the GPS antenna firmly.
- Remove the side cover, route the cable through the storage box to the control panel, and secure it with a cable tie.
- Connect the GPS antenna's plug to the machine.
Notes:
- Ensure the system power is off when connecting the GPS antenna.
- Do not shorten or extend the GPS cable; this may cause short circuits or malfunctions.
- The antenna should be installed where radio waves are least blocked for accurate navigation.
- Do not interfere with the GPS antenna with the steering wheel or gear lever.
5.4 Physical Installation
The machine has 4 fixing holes for secure mounting. The frame also has multiple points for attachment. Ensure the unit is properly aligned and secured within the Accord 7 frame.
6. Operating Instructions
6.1 Basic Operations
- Power On / Off: If ACC is connected, press the power button on the front panel to switch on. To switch off, turn off the engine and unplug the car key.
- Volume Adjustment: Press "VOL+" / "VOL-" buttons on the front panel (or on-screen controls) to adjust volume.
- Mute Control: Press the left volume button to display the volume bar. Press the media volume to MUTE.
- Backlight Control: Adjust backlight settings under Display Setting in Car Settings.
- Camera: The screen automatically switches to rear view when the car is in reverse.
- Playback Mode and Position Memory: The system resumes to the last mode (radio channel, music, or video) prior to shutdown.
6.2 System Settings
Touch the "Settings" icon on the front panel or main interface to access system settings. Scroll up/down to find desired options.
Network & Internet:
- Wi-Fi Connection: Go to Settings > Wi-Fi, ensure Wi-Fi is on, search for your hotspot, enter password, and connect.
- More: Set up personal hotspot and VPN.
Car Infotainment (General Settings):
- Sleep Mode: Turn ON/OFF sleep mode.
- Touch Assist: Enable/disable touch assist for easy maneuverability.
- Reverse Volume Control: Adjust volume while in reverse (None, Weak, Medium, Strong). Selecting 'Strong' lowers the volume most.
- Restore Factory Setting: Restores all settings to default. Confirm in the popup dialog.
Display Setting:
- Adjust display brightness for daytime and nighttime.
Volume Option:
- Adjust volume options for respective systems as desired.
Sound Effect:
Enter the sound effect interface to access different sound modes.
- Balance Setting: Adjust speaker volume using four arrows. The black dot in the center indicates consistent volume. Touch the restore icon to reset.
- Loudness Setting: Slide left/right to adjust loudness. Higher loudness increases low-frequency values. Adjust reasonably to avoid frequency signal loss.
Video Option:
- Video in Motion: Enable/disable video playback while the car is in motion. If disabled, video and pictures cannot be viewed while driving.
- Reversal Warning Line: Enable this option for safety. It displays the distance to the warning line during reverse, especially useful if your car camera lacks this feature.
Navigation Setting:
- Navigation Application Option: Insert a pre-installed navigation application to pair with the navigation button. The system displays all installed applications for selection.
Maneuver Control (Steering Wheel Buttons):
To set up steering wheel controls:
- Select "CLEARALL" to delete existing settings.
- Press the desired control button on your steering wheel.
- Touch the corresponding feature of the control button on the touchscreen.
- When the control button changes to blue, the setting is successful.
- Repeat steps 2-4 for all control buttons.
If your order includes a Canbus, ensure the Canbus type is set up correctly for the buttons to function. Contact customer service for assistance.
6.3 Applications
Navigation:
The GPS navigation system provides precise positioning and fast calculation for efficient travel. Ensure sufficient storage space on the internal SD card for map data. Copying and deleting data can be done via the defaulted ES File Explorer.
- Some navigation apps may not support external SD card/USB drive storage for route planning.
- Install APK Navigation Application and ensure map data is correctly installed.
- After successful installation, an icon will appear on the homepage. Touch it to launch.
- You can link the navigation button to an application via "Car Setting" > "Navigation Setting" > "Navigation Application Option".
Radio:
Touch the radio icon on the main interface or application page to enter radio mode.
- Channel Search: Use the arrow icons to search for band channels. Search stops automatically when a channel is found.
- Band Search: Select FM1, FM2, FM3, AM1, AM2.
- Automatic Channel Search: Touch the search icon to automatically scan from low to high frequency for the strongest signal. Touch again to stop.
- Preset Radio Channel: Each band can store up to 6 radio channels (total 24). Long press a preset button (1-6) for 2 seconds to save the current channel.
Video:
Touch the music video icon to play video files from internal storage, USB drive, or other supported formats (ape, flac).
- Screen Playback Ratio: Adjust the video aspect ratio.
- Loop Playback: Enable/disable video looping.
- Controls: Use icons to switch videos, play/pause.
Music:
The machine supports MP3 cover display. If the song includes cover data, it will be shown.
- Repeat and Shuffle: Toggle repeat mode (current song, all songs) and shuffle.
- Controls: Icons for switching music, play/pause, file list, volume, collection, sound, audio display, favorite audios.
Bluetooth:
Bluetooth hands-free function allows safe calling while driving.
- Pairing: Activate Bluetooth on your mobile phone and the machine. Search for the machine's name (e.g., BT5454). Enter PIN (0000) if prompted. A "CONNECTED" sign appears upon success.
- Making Phone Calls: Dial directly on the phone or key in numbers on the dial pad. Use icons to delete numbers, call, hang off, and switch between private mode and loud speaker.
- Syncing Contacts: Touch the download icon to sync contacts from your phone. Contact book supports name search.
- Call History: View outgoing, incoming, and missed calls. Perform calls or delete entries.
- Bluetooth Music: Play music from your mobile phone via Bluetooth. Supports previous, next, pause, play controls.
Note: Due to compatibility, some phone models may not fully support Bluetooth features. Contact customer service if issues arise.
CarPlay & Android Auto:
Enjoy seamless integration of your smartphone for navigation, entertainment, and a tailored driving experience.
- Wired Connection: Use the original data cable to connect your phone to the 4PIN USB cable. Turn on CarPlay/Android Auto on your phone and the Tlink5 icon on the device.
- Wireless Connection:
- For the first connection, turn on your phone's Bluetooth and pair it with the car's Bluetooth.
- After successful pairing, the car radio automatically jumps to the Tlink5 interface.
- Your phone will prompt to "use carplay with Tlink5".
- Turn on your mobile phone's Wi-Fi, and CarPlay will connect. For subsequent connections, only Wi-Fi needs to be on.
AVIN Input Support:
The machine supports AV (Line Audio / CVBS Audio) input. Connect external AV systems via AV cable. Touch the AVIN icon on the main interface to switch to AV input mode.
7. Maintenance
7.1 Display Screen Instructions
- Do not expose the display screen directly under sunlight or heat for long periods to prevent damage.
- Do not expose the display screen directly under sunlight when not in use.
- The display screen should be used within operating temperature range: -10°C to +50°C.
- Storage temperature range: -20°C to +80°C.
- Small black or bright dots may appear on the LCD screen; this is a specification, not a defect.
- In cold areas, the LCD screen may be dimmer initially but will adjust to normal brightness.
- Direct sunlight exposure may make the screen difficult to see due to reflection.
7.2 Maintaining the LCD Screen
- Turn off the power before cleaning.
- Wipe the screen with a soft fabric to prevent scratches.
- Do not use wet towels, benzene, or chemical cleaners.
8. Troubleshooting Guide
If you encounter problems, refer to this guide for quick solutions. If issues persist, contact customer service. Do not dismantle the machine without proper advice.
Common Issues and Solutions:
| Issue | Cause | Action |
|---|---|---|
| Device does not power on | Car key not inserted or ACC not turned on | Insert car key and turn on ACC. |
| Power cord not connected | Connect power cord correctly. | |
| Fuse is damaged | Replace fuse. | |
| Wiring issue (ACC and B+ wires) | Try combining ACC (red) and B+ (yellow) wires on the power plug to test. If it powers on, contact customer service for professional guidance. Ensure engine is off and do not cut wires; just scrape insulation and connect metal parts. | |
| Poor Radio Signal | Radio antenna not connected or adapter missing | Check radio antenna connection. If no adapter was included, original antenna can plug directly. |
| Incorrect audio region setting | Go to Car Settings > Factory > 123456 > Select Audio Region and set to match your location. | |
| Weak signal in certain areas | Try scanning for stations again in the city. | |
| Low hands-free call volume | Bluetooth signal receiver cable (short blue cable) not connected to 10-pin socket | Check if the short blue cable is inserted into the 10-pin socket on the back of the device. |
| Channel balance issue | Go to Car Settings > Factory > 123456 > Channel balance > Increase Bluetooth call. | |
| Persistent low volume | Connect an external microphone (3.5mm interface). | |
| Original vehicle features (e.g., steering wheel controls) not working (with Canbus) | Canbus box or 8-pin plug not connected correctly | Ensure both Canbus box and 8-pin plug on power cable are connected to the device. |
| CAN protocol not selected or network issue | Ensure network connection before selecting CAN protocol. Contact customer service for Canbus setup guide. | |
| Left side button lights not working | Headlight off, ILL small light wire loose, or 'Color' APK missing | 1. Check if headlights are on. 2. Check ILL small light wire. 3. Connect ILL light cable to ACC cable. 4. If model is DW and 'Color' APK is missing, contact Junsun customer service to reinstall. |
| Inresponsive touch screen | System multitasking (e.g., navigation) | Wait a moment. If problem persists, contact customer service. |
| No rear view image | Reverse camera not installed | Install reverse camera and plug into CCD socket. |
| Reverse camera type does not match | Replace the reverse camera. | |
| Rear view appears during reverse even when system is not booted. Power button is null. | Safety feature: rear view function preset for safety priority | Power on to boot the system after resuming from reverse position to normal. |
| No GPS signal | GPS antenna not connected | Connect GPS antenna correctly. |
| Car may be at GPS signal blind spot | If problem persists, contact customer service for assistance. | |
| Positioning and navigation failed upon power on | Blind spot of navigation map; remote areas or routes not covered | Contact customer service to update the map. |
| Unable to locate destination routes | Incorrect spelling or destination not updated in database | Ensure correct spelling, try possible names. If still unable, map may not be updated. |
| Navigation routes are far | Navigation system rules based on map data; considers road grade, traffic, etc. | System sets routes based on built-in rules. |
| Blank on the map | Scale setting or loss of GPS signal | Adjust map display zoom. If problem persists, reset destination or select new landmark. |
9. User Tips
- Initial GPS Fix: The device needs to acquire a satellite signal successfully for the first time to update the time and ensure accurate navigation.
- Memory Usage: Be aware that the system and preinstalled applications will consume a portion of the device's memory. Installing large map files (e.g., Europe maps) will further reduce available storage.
- Regular Updates: Junsun provides free updates for firmware, software, UI, and navigation maps. Regularly check for and install these updates to ensure optimal performance and access to new features.
- Voice Control: Utilize the AI Voice control feature for safer operation while driving, reducing the need for manual interaction.
- Online Radio: Take advantage of the online radio feature for a wide selection of stations and stable, clear audio quality, especially in areas with poor FM reception.
10. Warranty and Support
10.1 Warranty
The Junsun X7 Series Car Radio comes with a 2-year warranty from the date of receipt confirmation. If the product experiences a problem within this period, Junsun offers a direct replacement of the new machine. Please contact customer service first to communicate any issues.
10.2 Contact Information
For any questions, support, or warranty claims, please contact Junsun customer service:
- Email: Junsun888@163.com
- Web: https://junsun-china.com/
Office Addresses:
- Poland Office: ALEJA KRAKOWSKA 165/D5-D7 05-552 ŁAZY, Polska
- US Office: 8333 Rochester Ave, Unit 108, Rancho Cucamonga, California, 91730
- China Office: Room 601, Floor 6 West, Building No.9 Area A, Tianliao industrial Area, Taoyuan street, Nanshan District, Shenzhen, Guangdong
Junsun provides 24/7 customer service support.