Dioche dashboard circuit board

Contents

Electric Scooter Dashboard Circuit Board Instruction Manual

Brand: Dioche | Model: Dashboard Circuit Board

1. Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your new Electric Scooter Dashboard Circuit Board. Designed for 8.5 to 10-inch electric scooters, this PCB-based dashboard offers a durable, waterproof, and oxidation-resistant solution for displaying essential ride data.

2. Product Features

  • Durable Material: Constructed from premium PCB materials, ensuring durability, waterproofing, and excellent oxidation resistance for long-lasting performance.
  • Clear Data Display: Provides a cool and clear display of real-time power and speed information, allowing for accurate readings at a glance.
  • Easy Replacement: Designed for straightforward replacement of old or damaged dashboards, facilitating a stable and hassle-free installation process.
  • User-Friendly Installation: Features a user-friendly design that simplifies both installation and removal, ensuring a smooth experience without complications.
  • Universal Compatibility: Compatible with a wide range of 8.5 to 10-inch electric scooters, making it a versatile repair part.

3. Setup and Installation

This dashboard circuit board is designed for easy replacement. Please follow these general steps for installation. It is recommended to consult a professional if you are unsure about any steps.

Safety Precautions:

  • Always ensure the electric scooter is powered off and disconnected from any power source before beginning installation.
  • Wear appropriate safety gear, such as gloves, to prevent injury.
  • Handle the circuit board by its edges to avoid damaging electronic components.

Installation Steps:

  1. Access the Old Dashboard: Carefully remove the cover or housing that protects the existing dashboard on your electric scooter. This may involve unscrewing fasteners or prying open clips.
  2. Disconnect Old Dashboard: Gently disconnect all wiring harnesses and connectors from the old dashboard circuit board. Take note of their positions or take photos for reference.
  3. Remove Old Dashboard: Once all connections are detached, remove the old dashboard from its mounting.
  4. Install New Dashboard: Position the new Electric Scooter Dashboard Circuit Board in the same location as the old one.
  5. Connect Wiring: Reconnect all wiring harnesses and connectors to the new dashboard. Ensure each connector is securely seated in its correct port. Refer to the images below for typical connector types.
  6. Secure Dashboard: Secure the new dashboard in place using the original fasteners or mounting mechanism.
  7. Reassemble Scooter: Replace any covers or housing removed in step 1.
  8. Test Functionality: Power on the scooter and verify that the new dashboard functions correctly, displaying speed, power, and other indicators.
Electric Scooter Dashboard Circuit Board with Wires

Figure 3.1: Overview of the Electric Scooter Dashboard Circuit Board with connected wires.

Close-up of Dashboard Connectors

Figure 3.2: Close-up view of the display and button on the circuit board.

Close-up of PCB Connections

Figure 3.3: Detailed view of the display's connection to the main PCB.

4. Operating Instructions

The dashboard provides real-time information about your scooter's status. Familiarize yourself with the display and controls.

Display Indicators:

  • Digital Speed Display: Shows current speed in '88' format. Can display in km/h or mph.
  • Speed Unit: Indicates 'km/h' or 'mph'.
  • Riding Modes: 'ECO', 'D' (Drive), 'S' (Sport) modes.
  • Headlight Indicator: Illuminates when headlights are active.
  • Bluetooth Indicator: Illuminates when Bluetooth is connected.
  • Battery Level: Displays current battery charge level.

Controls:

A single button is present on the circuit board, typically used for power on/off, mode switching, and headlight control. The exact functionality may vary slightly depending on the scooter model it is integrated into.

  • Short Press: Usually cycles through riding modes (ECO, D, S) or turns headlights on/off.
  • Long Press: Typically used to power the scooter on or off.
Dashboard Button Close-up

Figure 4.1: Close-up of the control button on the dashboard circuit board.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your dashboard circuit board.

  • Cleaning: Use a soft, dry cloth to gently wipe the display and surrounding areas. Avoid using abrasive cleaners or solvents that could damage the screen or components.
  • Moisture Protection: Although the board is waterproof, avoid prolonged exposure to heavy rain or submerging the scooter in water. Ensure all connections are dry before operating.
  • Connection Checks: Periodically inspect the wiring connections to ensure they are secure and free from corrosion.
  • Storage: If the scooter is stored for an extended period, ensure it is in a dry, temperature-controlled environment.

6. Troubleshooting

If you encounter issues with your dashboard, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Dashboard does not power onLoose connection, power supply issue, damaged boardCheck all wiring connections. Ensure scooter battery is charged and functional. If problem persists, the board may be faulty.
Incorrect speed/data displaySensor issue, loose connection, software glitchVerify all connections are secure. Restart the scooter. If the issue continues, consult a technician.
Buttons unresponsiveButton malfunction, internal board issueEnsure no debris is obstructing the button. If unresponsive, the board may require replacement.
Bluetooth not connectingPairing issue, scooter/phone Bluetooth offEnsure Bluetooth is enabled on both devices. Try re-pairing. Check for app updates if applicable.

If these troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a qualified technician or contact customer support.

7. Specifications

AttributeDetail
Brand NameDioche
Model Numberdashboard circuit board
MaterialPCB
WeightApprox. 46g / 1.6oz
CompatibilityFor 8.5 to 10-inch electric scooters
OriginMainland China
Feature 1Electric Scooter Circuit Board
Feature 2Electric Scooter Dashboard Circuit Board
Feature 3Electric Scooter Panel Circuit Board
Feature 4Electric Scooter Repair Parts
Feature 5Electric Scooter Parts

8. User Tips

No specific user tips are available at this time. Always ensure proper installation and handle electronic components with care.

9. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase records for any warranty claims.

© 2023 Dioche. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.