LEFOO LFDS630

Contents

LEFOO LFDS630 Digital Display Pressure Controller User Manual

Model: LFDS630 | Brand: LEFOO

1. Introduction

The LEFOO LFDS630 is an advanced digital display pressure controller designed for precise monitoring and control of pressure in various systems, including vacuum pumps, air compressors, and other industrial applications. Featuring a full engineering plastic shell, high-contrast LCD display, and robust design, it offers anti-vibration capabilities, a long lifespan, simple operation, and strong stability. This manual provides essential information for the safe and efficient use of your LFDS630 pressure controller.

2. Safety Information

  • Always ensure the power supply is disconnected before installation, maintenance, or troubleshooting.
  • Installation should be performed by qualified personnel in accordance with local electrical codes and safety regulations.
  • Do not exceed the specified rated voltage and current.
  • Ensure the device is used within its specified operating and storage temperature ranges.
  • Protect the device from direct impact, excessive vibration, and corrosive environments unless specifically rated for such conditions.
  • Verify that the pressure connection is secure and leak-free before operation.

3. Product Overview

The LFDS630 features a clear LCD digital display for real-time pressure readings and an intuitive button interface for setting parameters. Its robust design ensures reliable performance in demanding environments.

Front view of the LEFOO LFDS630 Pressure Controller

Figure 3.1: Front view of the LEFOO LFDS630 Pressure Controller.

Bottom view of the LEFOO LFDS630 Pressure Controller showing the pressure sensor connection.

Figure 3.2: Bottom view showing the G1/4 pressure sensor connection.

LFDS630 Smart Digital Display Pressure Switch with features like anti-vibration, LCD display, and strong stability, along with FULL ENGINEERING PLASTIC SHELL DESIGN and HIGH CONTRAST LCD DISPLAY.

Figure 3.3: Key features of the LFDS630, including full engineering plastic shell and high-contrast LCD display.

Video 3.1: A 32-second product showcase of the LFDS630 Pressure Controller.

4. Specifications

Product parameters table for LFDS630 Pressure Controller

Figure 4.1: Detailed product parameters.

LFDS630 Product Parameters
ParameterSpecification
Product TypeElectronic pressure switch
ModelLFDS630
DIY SuppliesElectrical
OriginMainland China
CertificationNone
Pressure Range (Vacuum)-101 ~ 10 kPa
Pressure Range (Medium)0 ~ 16 bar
Pressure Range (High)0 ~ 20 bar
Withstand Voltage (Vacuum)1.5 times
Withstand Voltage (Medium/High)2 times
Applicable FluidAir, non-corrosive gas, non-corrosive liquid
Rated Voltage220V (3C rated voltage range: 36V and below)
Power Consumption<40mA (no load)
Load Capacity200VAC 10A max
Protection LevelIP65
Installation ConnectionBrass G1/4 external thread
Display Accuracy±1%F.S
Operating Temperature0 ~ +50℃
Storage Temperature-10 ~ +60℃
Overall Dimensions80 x 98 x 110 mm (with connector)

5. Model Interpretation

Model interpretation diagram for LFDS630-S-T-R

Figure 5.1: LFDS630 Model Interpretation and Working Mode Diagram.

The model number LFDS630 can be further broken down by suffixes:

  • LFDS630: Base model for the digital display pressure switch.
  • -A (Pressure Range):
    • 0: Vacuum (-101 ~ 10 kPa)
    • 1: Medium Pressure (0 ~ 16 bar)
    • 2: High Pressure (0 ~ 20 bar)
  • -B (Output Type):
    • S: Normally open AC relay output (active with load)
    • D: Active switch output
  • -C (Control Method):
    • T: No special function
    • C: Normally closed control
  • -D (Pressure Port):
    • R: R1/4
    • G: G1/4

6. Installation

The LFDS630 pressure controller is designed for flexible installation. Ensure the installation location is stable, free from excessive vibration, and within the specified environmental conditions.

Technical drawing showing product dimensions and G1/4 thread.

Figure 6.1: Product dimensions (80x98x110mm) and G1/4 thread details.

  1. Mounting: Secure the controller in a suitable location using appropriate fasteners. The device's dimensions are 80x98x110mm (including the connector).
  2. Pressure Connection: Connect the pressure source to the brass G1/4 external thread port at the bottom of the unit. Use appropriate sealing tape or compound to ensure a leak-free connection.
  3. Electrical Wiring: Connect the power supply and load according to the wiring diagram for your specific application. Ensure the rated voltage (220V) and current (max 10A) are not exceeded. The device has an IP65 protection level, suitable for environments where dust and water splashes may occur.
  4. Power On: Once all connections are secure, apply power to the device.

7. Operation

The LFDS630 monitors pressure in real-time and controls relay output based on user-defined set points. The front panel features a digital display and control buttons: SET, △ (Up), ▽ (Down), AHR, and ON/OFF.

Image showing the control panel and mentioning built-in adjustable working parameters.

Figure 7.1: Front panel with LCD display and control buttons.

7.1 Basic Functionality

  • The LFDS630 continuously monitors the pressure within the connected system.
  • It automatically stops (OFF) or starts (ON) the connected load (e.g., pump, compressor) based on the configured high-pressure (HI-P) and low-pressure (Lo-P) set points.

7.2 Working Mode

The device operates based on a differential pressure control logic:

  • HI-P (High Pressure Set Point): This is the stop pressure for the rated load. When the system pressure reaches or exceeds HI-P, the controller will turn OFF the load.
  • Lo-P (Low Pressure Set Point): This is the start pressure for the rated load. When the system pressure drops to or below Lo-P, the controller will turn ON the load.

This mechanism ensures that the pressure is maintained within the desired range by cycling the connected equipment ON and OFF as needed.

7.3 Setting Parameters

The LFDS630 has built-in multiple setting items, allowing users to adjust working parameters. Detailed instructions for navigating the menu and setting HI-P, Lo-P, and other advanced parameters (such as lock protection) can be accessed via the 'SET' button and adjusted using the '△' and '▽' buttons. The 'ON/OFF' button controls the power to the connected load, while 'AHR' may be used for alarm reset or other auxiliary functions depending on the specific firmware version.

8. Applications

The LFDS630 Digital Display Pressure Controller is versatile and suitable for a wide range of applications requiring precise pressure control and monitoring. Common scenarios include:

Image depicting various application scenarios: Medical production, Hydraulic equipment, Gas alarm, Smart manufacturing.

Figure 8.1: Available scenarios for the LFDS630.

  • Medical Production: For controlling pressure in medical equipment and processes.
  • Hydraulic Equipment: Ensuring optimal pressure levels in hydraulic systems.
  • Gas Alarm Systems: Monitoring gas pressure and triggering alarms or control actions.
  • Smart Manufacturing: Integration into automated production lines for pressure regulation.
  • Vacuum Pumps: Maintaining desired vacuum levels.
  • Air Compressors: Regulating air pressure for various tools and systems.

9. Maintenance

Regular maintenance ensures the longevity and accurate performance of your LFDS630 pressure controller.

  • Cleaning: Periodically clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Connection Check: Regularly inspect all electrical and pressure connections for tightness and signs of wear or corrosion. Re-tighten as necessary.
  • Environmental Conditions: Ensure the device remains within its specified operating and storage temperature and humidity ranges.
  • Sensor Inspection: Check the pressure sensor port for any blockages or debris that might affect readings.

10. Troubleshooting

If you encounter issues with your LFDS630, refer to the following basic troubleshooting steps:

ProblemPossible CauseSolution
Display is blankNo power supply or faulty connection.Check power cable and connections. Ensure power is supplied to the unit.
Incorrect pressure readingSensor blockage, leak in pressure line, or sensor malfunction.Inspect pressure port for debris. Check for leaks in the pressure connection. If problem persists, contact support.
Load not switching ON/OFFIncorrect HI-P/Lo-P settings, faulty wiring to load, or relay malfunction.Verify set points. Check wiring to the load. Ensure the load itself is functional.
Device unresponsive to buttonsTemporary software glitch or button malfunction.Try power cycling the device. If issue persists, contact support.

11. Support

For any questions, technical assistance, or issues not covered in this manual, please contact our support team. We aim to address your concerns within 2 business days.

  • Email: 397384418@qq.com
  • WeChat/WhatsApp: +8613907407457

Please have your product model (LFDS630) and a detailed description of the issue ready when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.