QYT NTN8251

Contents

NTN8251 Rechargeable Battery Pack User Manual

For Motorola SABER Series Two-Way Radios

1. Introduction

This manual provides essential information for the safe and effective use of your NTN8251 rechargeable Ni-Mh battery pack. This high-quality replacement battery is designed to be compatible with various Motorola SABER series two-way radios and can be charged using original OEM chargers that support Ni-Mh chemistry.

2. Specifications

Feature Detail
Chemistry Ni-Mh
Capacity 1200mAh
Voltage 7.2 V (Output: DC7.4V, Input: 8.4V)
Dimensions 4.04" x 2.93" x 1.14"
Weight 404g
Color Black
Battery Type Rechargeable Use

Compatible Models:

  • Motorola Astro Saber
  • Motorola MX1000, MX2000, MX3000, MX3010, MX3013
  • Motorola Saber I, Saber I R, Saber II, Saber II R, Saber III, Saber 1, Saber 2, Saber 3

Replaces OEM Part Numbers:

  • Motorola NTN4593, NTN4593DR
  • Motorola NTN4594, NTN4595, NTN4595A, NTN4595B, NTN4595DR, NTN4595M
  • Motorola NTN8251AR

3. Product Overview

Observe the various angles of the NTN8251 battery pack to familiarize yourself with its design and contact points.

Front-side view of the NTN8251 battery pack, showing the gold contact pins.
Front-side view of the NTN8251 battery pack, showing the gold contact pins.
Back-side view of the NTN8251 battery pack, showing the textured grip.
Back-side view of the NTN8251 battery pack, showing the textured grip.
Top view of the NTN8251 battery pack, highlighting the connection slot.
Top view of the NTN8251 battery pack, highlighting the connection slot.
Angled view of the NTN8251 battery pack, focusing on the gold contact pins.
Angled view of the NTN8251 battery pack, focusing on the gold contact pins.
Bottom view of the NTN8251 battery pack, showing the charging contacts.
Bottom view of the NTN8251 battery pack, showing the charging contacts.

Product Video

A 14-second video showcasing the NTN8251 battery pack from various angles.

4. Setup

  1. Initial Charge: Before first use, fully charge the battery pack. Connect the battery to a compatible Ni-Mh charger.
  2. Installation: Align the battery pack with the battery compartment of your Motorola SABER series radio. Slide the battery into place until it clicks securely. Ensure the contacts on the battery align with the contacts in the radio.
  3. Removal: To remove the battery, locate the release latch (if present on your radio model), press it, and slide the battery out.

5. Operating the Battery Pack

Charging:

  • Use only chargers designed for Ni-Mh batteries and compatible with Motorola SABER series battery packs.
  • Ensure the battery is properly seated in the charger.
  • The charging indicator on your charger will typically show when charging is in progress and when it is complete.
  • Avoid overcharging for extended periods, although modern Ni-Mh chargers often have protection mechanisms.

Discharging:

  • The battery will discharge during normal use with your two-way radio.
  • For optimal battery life, it is recommended to fully discharge the battery before recharging it periodically (e.g., once a month) to prevent memory effect, although Ni-Mh batteries are less prone to this than Ni-Cd.

6. Maintenance

  • Cleaning: Keep the battery contacts clean and free of dirt or corrosion. Use a clean, dry cloth to wipe the contacts if necessary.
  • Storage: If storing the battery for an extended period, charge it to about 50% capacity and store it in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 3-6 months to prevent deep discharge.
  • Temperature: Avoid exposing the battery to extreme heat or cold, as this can degrade performance and shorten its lifespan.

7. Troubleshooting

Problem Possible Cause Solution
Battery not charging Incorrect charger, dirty contacts, faulty battery/charger. Ensure charger is compatible. Clean battery and charger contacts. Try another known-good battery/charger to isolate the issue.
Short operating time Battery not fully charged, aging battery, memory effect. Ensure full charge. Perform a full discharge/recharge cycle. If issue persists, battery may need replacement.
Radio not powering on with battery Battery not installed correctly, battery completely drained, faulty radio. Re-install battery securely. Charge battery fully. Test with another known-good battery or power source.

8. User Tips

  • For optimal performance, avoid mixing new and old batteries, or batteries of different chemistries.
  • Always keep a spare charged battery for critical communication needs.
  • If your radio has a battery saving feature, enable it to extend operating time.

9. Warranty and Support

This product comes with a One Year Warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

Please retain your proof of purchase for warranty purposes.

© 2023 QYT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.