1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the TM08 Air Conditioning Control Panel. The TM08 is a wired manual control unit designed for commercial air conditioning systems, offering reliable control over your HVAC environment. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

This image displays the user interface of the TM08 control panel, including the digital screen, power button, mode selection, fan speed adjustment, and temperature up/down controls.
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | TM-08 |
| Type | Line, Air Conditioner Parts |
| Application | Commercial |
| Certification | CE |
| Origin | Mainland China |
| High-concerned chemical | None |
3. Package Contents
The TM08 Air Conditioning Control Panel package typically includes:
- 1 x TM08 Air Conditioning Control Panel with integrated wiring harness
4. Safety Information
Always observe the following safety precautions:
- Disconnect power to the air conditioning unit before installation or maintenance.
- Installation should only be performed by a qualified HVAC technician or electrician.
- Do not expose the control panel to water or excessive moisture.
- Do not attempt to open or repair the unit yourself. Refer to qualified service personnel.
- Ensure all wiring connections are secure and comply with local electrical codes.
5. Installation and Setup
The TM08 control panel is designed for wired integration with compatible air conditioning systems. Professional installation is highly recommended.
5.1 Wiring Connections
The control panel comes with an integrated wiring harness. Connect this harness to the corresponding terminals on your air conditioning unit's control board. Refer to your air conditioning unit's specific wiring diagram for correct terminal identification.

This image shows the control panel from a top-down perspective, clearly displaying the multi-pin connector and attached wires that form the wiring harness for system integration.
General Wiring Guidelines:
- Ensure power is OFF before making any connections.
- Match wire colors or labels from the TM08 harness to the air conditioning unit's terminals.
- Secure all connections firmly to prevent loose contacts.
5.2 Mounting
Mount the control panel in a suitable indoor location, away from direct sunlight, heat sources, and drafts. Ensure it is easily accessible for operation. Use appropriate screws or mounting hardware (not included) to secure the panel to a wall or mounting box.
6. Operating Instructions
Once installed and powered, the TM08 control panel allows for manual control of your air conditioning system.
6.1 Power On/Off
- Press the Power button (usually marked with a circle and vertical line) to turn the unit ON or OFF.
6.2 Mode Selection
- Press the Mode button to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto). The current mode will be displayed on the screen.
6.3 Temperature Adjustment
- Use the Up (▲) and Down (▼) arrow buttons to set your desired temperature. The set temperature will be shown on the display.
6.4 Fan Speed Control
- Press the Fan button to adjust the fan speed (e.g., Low, Medium, High, Auto).
6.5 Display Information
The digital display typically shows:
- Current room temperature
- Set temperature
- Operating mode icon
- Fan speed indicator
7. Maintenance
To ensure optimal performance and longevity of your TM08 control panel, follow these simple maintenance guidelines:
- Cleaning: Wipe the surface of the control panel with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- Inspection: Periodically check the wiring connections for any signs of wear or looseness.
- Environmental Conditions: Keep the control panel in a stable environment, avoiding extreme temperatures or humidity.
8. Troubleshooting
If you encounter issues with your TM08 control panel, try the following basic troubleshooting steps:
- No Power/Display Off: Check the power supply to the air conditioning unit. Ensure all wiring connections are secure.
- Incorrect Temperature Reading: Ensure the control panel is not exposed to direct heat sources or drafts that could affect its internal sensor.
- Unit Not Responding: Try turning the air conditioning unit off and on at the main power supply to reset the system.
- Buttons Not Working: Ensure the buttons are clean and free from debris. If unresponsive, contact support.
For persistent issues, contact qualified service personnel.
9. User Tips
- For optimal energy efficiency, avoid frequently changing temperature settings. Set a comfortable temperature and allow the system to maintain it.
- Regularly clean or replace air filters in your air conditioning unit to ensure proper airflow and system performance.
- If your system has a 'Sleep' or 'Eco' mode, utilize it during off-peak hours to save energy.
10. Warranty and Support
Our company guarantees that products undergo strict inspection to ensure a 100% qualification rate upon leaving the factory. After installation and debugging, if the product itself has quality problems, we are responsible for free maintenance.
10.1 Warranty Coverage
During the warranty period, if the product has quality issues, our company will provide free maintenance. If the product exceeds the warranty period, paid services will be provided within a reasonable scope.
10.2 Exclusions from Free Warranty
Free warranty is not provided under the following circumstances, though reasonable paid service may still be available:
- The product is out of its warranty period.
- Proof of purchase cannot be provided.
- Failure to use or repair the product as specified in the product manual (e.g., water ingress, breakage, human-induced damage).
- Unauthorized repair or disassembly of the product by the customer or a non-designated maintenance person.
- Damage caused by using informal or poor-quality communication cables.
- Product failure or damage caused by irresistible disasters such as floods, fires, lightning strikes, or earthquakes.
- Other failures or damage not caused by the product itself.
10.3 Technical Support
Our technicians are available to answer all product-related questions. For product quality issues, we guarantee a reply or solution within 24 hours. During the warranty period, on-site processing, if required, is guaranteed within 48 hours.