1. Introduction
Thank you for choosing the LIKIMIO Twin Bed Frame. This velvet upholstered platform bed frame is designed to provide a comfortable and stylish sleeping solution. It features a sturdy metal frame, durable wooden slats, and a tufted headboard. This manual provides essential information for safe assembly, proper use, and maintenance of your new bed frame.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.
- Ensure all bolts and screws are securely tightened before using the bed. Periodically check and re-tighten as necessary.
- Do not stand or jump on the bed frame.
- Use the bed frame on a flat, level surface.
- Do not use power tools for assembly unless explicitly instructed, as this may overtighten or damage components.
3. Package Contents
Before beginning assembly, please ensure all parts are present and undamaged. Refer to the included parts list and hardware pack. If any parts are missing or damaged, please contact customer support.
Figure 3.1: Example of bed frame components and hardware.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | HK-TBF-11 |
| Type | Twin Platform Bed Frame |
| Material | Wood, Metal, Velvet Fabric |
| Upholstery | Velvet Fabric |
| Support System | Wooden Slats, Metal Frame, 4 Wooden Legs, 2 Additional Metal Legs |
| Installation Method | Assembly Required |
| Approximate Dimensions (L x W x H) | 74.8" x 39.6" x 43.3" (190cm x 100.5cm x 110cm) |
| Headboard Height | 43.3" (110cm) |
| Footboard Height | 11.8" (30cm) |
| Headboard Panel Height | 21.7" (55cm) |
| Leg Height | 15.7" (40cm) |
| Product Weight | Approximately 24.7 kg |
| Available Colors | Pink, Grey, Blue, Beige |
Figure 4.1: Twin Bed Frame Dimensions.
5. Assembly Instructions
Assembly of the LIKIMIO Twin Bed Frame is designed to be straightforward, typically taking about 40 minutes. All necessary parts are clearly labeled, and the instructions are illustrated for ease of understanding.
Before You Begin:
- Clear a spacious area for assembly.
- Lay out all components and hardware, matching them against the parts list.
- Ensure you have the required tools (usually an Allen wrench, often included).
General Assembly Steps:
- Attach the side rails to the headboard and footboard using the provided bolts and washers.
- Install the central support beam and its associated metal legs. Ensure these are securely fastened to prevent squeaking.
- Place the wooden slats onto the support rails. Some slats may have pre-drilled holes for optional securing.
- Attach the four wooden legs to the corners of the bed frame.
- Once fully assembled, gently shake the frame to ensure stability. Re-tighten any loose connections.
Figure 5.1: Detail of solid wood legs and sturdy metal support.
6. Care and Maintenance
Fabric Care (Velvet Upholstery):
- Regular Cleaning: Gently vacuum the velvet upholstery with a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can damage the pile. For stubborn stains, use a mild, water-free solvent or dry-cleaning product. Always test on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading.
Figure 6.1: Soft velvet fabric detail.
Frame Care:
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent squeaking.
- Cleaning: Wipe down wooden and metal parts with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
7. Troubleshooting
Common Issues and Solutions:
- Squeaking Noise: If the bed frame makes squeaking noises, check all connections, especially those involving the metal frame and central support. Tighten any loose bolts. Ensure the wooden slats are properly seated.
- Instability/Wobbling: Verify that the bed frame is on a level surface. Check all leg attachments and frame connections for tightness.
- Damaged or Missing Parts: If you discover any damaged or missing parts during or after assembly, do not proceed with assembly. Contact customer support immediately for assistance.
8. User Tips
- Mattress Compatibility: This twin bed frame is designed for a standard twin-sized mattress (approximately 38 x 75 inches). No box spring is required due to the platform design with wooden slats.
- Suitable for All Ages: The sturdy construction and standard twin dimensions make this bed frame suitable for children, teenagers, and adults.
- Easy Assembly: Many users find the assembly process quick and straightforward, often completed within 40 minutes with the provided tools and clear instructions.
9. Warranty and Support
For any questions, concerns, or issues regarding your LIKIMIO Twin Bed Frame, please contact the seller or manufacturer's customer support. Please have your model number (HK-TBF-11) and purchase information ready when contacting support.
