1. Product Overview
The ATS-63 Automatic Transfer Switch is a PC class infrequent change-over switch designed for highly reliable power switching between a main power supply (Utility Power) and a backup power supply (Generator Power). It ensures a continuous power supply for various loads, including homes, shops, offices, and small backup power systems, especially in areas prone to frequent power outages or unstable grid supply.
The device features a fast transfer time of ≤0.04 seconds, minimizing interruption impact on sensitive devices.
Video: Automatic Transfer Switch in operation, demonstrating power switching between sources.
Image: Front view of the ATS-63/2P Automatic Transfer Switch.
Image: Detailed front view of the ATS-63/2P with labeled components: neutral/live wires for common and backup power, load output, auto/manual switch, closing indication, manual operation handle.
2. Setup and Installation
Important Installation Notice
This product is a PC-level Automatic Transfer Switch (ATS). It is designed for highly reliable power switching and does NOT provide short-circuit or overcurrent protection.
What You Need to Prepare:
- To prevent damage to the ATS in the event of a short circuit, you MUST install 2 external circuit breakers (or fuses) at the incoming power sources: Utility and Generator.
- Please ensure that the selected circuit breakers match the ATS's rated short-time withstand current.
Wiring Reference
Professional electrician installation is recommended. Wiring diagrams are for reference only. Please refer to the manual and local electrical standards.
Image: Wiring diagrams for 2P and 4P ATS models, showing connections for standby, normal incoming lines, and load output.
Image: Important installation notice illustrating the need for external circuit breakers for utility and generator power sources.
Choosing the Right Model
Select the appropriate ATS model based on your power system requirements:
| Step | Parameter | Options |
|---|---|---|
| 1 | Voltage | 110V (USA / Japan / Taiwan) or 220V-240V (Europe / Asia / Africa) |
| 2 | Poles | 2P (Single phase L+N, suitable for most homes) or 4P (Three phase 3L+N, suitable for factories / large houses) |
| 3 | Current | 40A / 63A available. Do not overload the ATS. |
Image: Guide on how to choose the right model based on voltage, poles, and current.
Protection for Unstable Generator Voltage
Unstable generator voltage may cause ATS switching failure or damage to connected devices. If voltage fluctuates frequently, install an over/under voltage protector before the ATS for safer system protection.
- WRONG CONNECTION: Generator → ATS → Load (Risk: voltage fluctuation damage)
- RECOMMENDED CONNECTION: Generator → Voltage Protector → ATS → Load (Safer system protection)
Image: Diagram showing recommended connection with a voltage protector for unstable generator voltage.
3. Operating Instructions
How the ATS-63 Works
The ATS-63 operates automatically to ensure a seamless power supply:
- Utility Power Normal: The ATS connects to the mains power supply.
- Utility Power Fails: The ATS automatically switches to the backup generator within 0.04 seconds.
- Utility Power Recovers: The ATS automatically switches back to the mains power supply.
This automatic switching in AUTO mode requires no manual operation.
Image: Flowchart explaining how the ATS-63 works, showing automatic switching between utility power and backup generator.
Indicator Lights & Mode Switch
The ATS features indicator lights and a mode switch for status monitoring and control:
- Red Light: Indicates power off or a fault.
- Green Light I: Indicates utility power is working.
- Green Light II: Indicates generator / backup power is working.
Mode Switch Positions:
- AUTO: Automatic switching mode.
- MANU: Manual mode for emergency or maintenance.
- Manual Handles: Used to switch to position I (Utility Power) or II (Backup Power) manually.
Important: After manual operation, always return the switch to AUTO mode. Do NOT force manual switching while in AUTO mode.
Image: Diagram explaining indicator lights (Red, Green I, Green II) and mode switch positions (AUTO, MANU, Manual Handle).
4. Maintenance
To ensure optimal performance and longevity of your ATS-63, regular maintenance is recommended:
- Regular Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Keep Clean: Ensure the unit is free from dust and debris, which can affect its operation.
- Operational Check: Occasionally test the automatic transfer function by simulating a power outage (if safe to do so and with proper precautions) to confirm it switches correctly.
- Mode Switch: Always ensure the mode switch is returned to 'AUTO' after any manual operation or maintenance. Avoid forcing the switch.
5. Troubleshooting
Common Problems & Solutions
| Problem | Solution |
|---|---|
| Computer restarts during power failure. | ≤0.04s fast switching helps reduce interruption impact. |
| Worried about wrong generator wiring. | Mechanical interlock helps prevent two power sources from connecting together. |
| Not sure if generator is compatible. | Works with 110V / 220V AC, 50/60Hz generator output. |
| Worried about installation. | Standard DIN rail installation. |
Image: Table of common problems and practical solutions for the ATS.
Frequently Asked Questions (FAQ)
- Q1: Will this ATS work with my solar inverter or battery system?
- A: NO. This ATS is designed for AC Utility Power vs. AC Generator. It does NOT support DC inputs (Batteries). For best performance with solar inverters, please opt for a PV-specific ATS.
- Q2: Does this ATS support 3-phase power?
- A: The 2P Model is only for Single Phase (Live + Neutral). The 4P Model supports Three Phase (3 Live wires + Neutral).
- Q3: The indicator light is red, but there is no power output. Is it broken?
- A: Not necessarily. First, check if the Auto/Manual switch is set to AUTO. Second, verify if the input voltage is within the specified range (110V-220V).
- Q4: Can I use this to switch between two different utility power sources?
- A: Yes, technically it can switch between any two AC power sources of the same voltage and frequency.
- Q5: Why does my computer restart when the power switches?
- A: The transfer time is ≤0.04s (40ms). While very fast, sensitive electronics might still detect the brief gap during the switch.
6. Specifications
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | ATS-63 |
| Poles | 2P / 4P |
| Rated Current | 40A / 63A |
| Rated Voltage | 110V / 220VAC |
| Frequency | 50/60Hz |
| Transfer Time | ≤0.04s |
| Insulation Voltage | 690VAC |
| Impulse Withstand Voltage | 8kV |
| Utilization Category | PC Class |
| Standard | IEC60947-6-1, CE |
| Installation | DIN Rail |
| Origin | Made in China |
Product Dimensions
Image: Product size information with dimensions for the ATS-63/2P model.
Key Advantages
Image: Four key advantages of the ATS-63: Fast Switching, Designed for Generator Backup, Mechanical Interlock Protection, Multiple Options Available.
- Fast Switching: ≤0.04s transfer time helps reduce interruption impact on sensitive devices.
- Designed for Generator Backup: Automatic switching between utility power and backup generator.
- Mechanical Interlock Protection: Prevents two power sources from being connected at the same time.
- Multiple Options Available: Supports 110V / 220V, 40A / 63A, and 2P / 4P configurations.
7. Warranty & Support
Compliance & Certifications
The ATS-63 Automatic Transfer Switch complies with the following standards:
- RoHS Compliance Certificate
- CE / LVD Compliance Verification
- Standard: IEC60947-6-1
Image: Compliance Certificates for RoHS and CE/LVD.
Additional Resources
A detailed user manual in PDF format is available for download: User Manual (PDF)
For further support or inquiries, please contact your seller or distributor.
8. User Tips
- Professional Installation: Due to the electrical nature of this device, professional electrician installation is highly recommended to ensure safety and proper function.
- Correct Mode Usage: Always ensure the mode switch is in 'AUTO' for automatic operation. Do not attempt to manually switch the device while it is in 'AUTO' mode.
- Voltage Protection: If your generator's voltage is unstable, consider installing an over/under voltage protector before the ATS to prevent damage to connected devices and the ATS itself.
- AC Power Only: This ATS is designed exclusively for AC power switching (Utility vs. AC Generator). It is not compatible with DC inputs, such as direct connections to lithium batteries or certain solar inverters without specific PV-compatible ATS models.
- Avoid Overload: Ensure the selected current rating (40A or 63A) is appropriate for your load and do not overload the ATS.