TOWILD DL1200S/DL1700

Contents

TOWILD DL1200S/DL1700 Bicycle Light Instruction Manual

Models: DL1200S, DL1700

Thank you for choosing the TOWILD Bicycle Light. This manual provides essential information for the safe and proper use of your device. Please read it thoroughly before operation.

1. Safety Information

Important Safety Warnings:

  • If the light is not used for an extended period, ensure it is charged every three months to maintain battery health.
  • Do not direct the light beam into eyes, as it can cause temporary vision impairment.
  • Keep the bicycle light away from flammable and explosive materials.
  • The waterproof rating is IPX6. Do not immerse the bicycle light in water. Ensure the USB rubber plug is securely closed to prevent water ingress.
  • Mount the bicycle light correctly and securely on your bicycle.
  • Keep out of reach of children to prevent accidents.

2. Package Contents

Please check the box for the following items:

  • Color Box x 1
  • Bicycle Light x 1 (DL1200S or DL1700 model)
  • TYPE-C Charging Cable x 1
  • GoPro Mount Adapter x 1
  • User Manual x 1
  • Discharge Adapter x 1
  • L-Shaped Allen Wrench x 1
  • Wireless Remote Control x 1
  • M5 Screw x 1 (for DL1200S model)

Note: The extension mount is not included as a standard accessory and can be selected based on different bike models. For more details, please consult customer service or your local offline store.

DL1200S Packing List
DL1200S Package Contents

3. Setup

3.1 Mounting the Bicycle Light

The TOWILD Bicycle Light features a GoPro compatible Garmin interface for quick installation and removal without the need for tools.

  1. Attach the GoPro Mount Adapter to your bicycle's handlebar or a compatible mount.
  2. Align the bicycle light with the mount adapter.
  3. Push and twist the light until it securely locks into place.
Quick Installation and Removal
Quick Installation and Removal Process

3.2 Wireless Remote Control Pairing

To pair the wireless remote control with your bicycle light:

  1. Ensure the bicycle light is turned on.
  2. Press and hold the light button on the bicycle light for 3 seconds to enter pairing state. The button indicator light will flash.
  3. While the light is flashing, press any one of the keys on the wireless remote control.
  4. The light will stop flashing and remain solid, indicating successful pairing.
Wireless Remote Control Pairing Guide
Wireless Remote Control Pairing Instructions
Video: Product Features Overview and Remote Control Pairing

4. Operating Instructions

4.1 Power On/Off and Mode Switching

The bicycle light features both manual and intelligent modes, offering various brightness levels and beam types.

  • Power On: Long press the main button for 0.5 seconds to turn on the light. It will start in intelligent mode by default.
  • Power Off: Long press the main button for 0.5 seconds to turn off the light.
  • Switch Brightness Mode: A single click of the main button will cycle through the brightness modes (High, Medium, Low, Flash).
  • Switch Beam Type: Use the dedicated button on the wireless remote control to switch between Focus beam and Flood beam modes.

4.2 Dual Light Source (Focus and Flood Beam)

Your TOWILD bicycle light is equipped with dual light sources to adapt to different riding conditions:

  • Flood Beam: Features an anti-glare design with a cut-off line, making city riding safer and more considerate by preventing dazzling oncoming traffic and pedestrians.
  • Focus Beam: Provides a long-range spot beam, ideal for handling complex road conditions and supporting fast riding.
Flood Beam vs Focus Beam
Comparison of Flood Beam and Focus Beam patterns

4.3 Wireless Remote Control

The wireless remote control allows for safe and convenient adjustment of light settings without removing your hands from the handlebars.

  • Brightness Adjustment: Use the designated buttons on the remote to easily adjust brightness levels.
  • Turbo Mode: Long press the Turbo button on the remote to activate the highest brightness (up to 1900 Lumens). Release the button to return to the previous mode.
  • Beam Type Switch: A single click on the remote's beam button switches between focus and flood beam modes.
Wireless Remote Control Functions
Wireless Remote Control Button Functions

4.4 Intelligent Sensing (Vibration Sensor)

The light is equipped with a vibration sensor for energy-saving and convenience.

  • In intelligent mode, the light will automatically turn off after 2 minutes of no vibration (e.g., when you stop riding).
  • A slight touch or movement will automatically wake the light up and turn it back on.
Vibration Sensor and Intelligent Temperature Control
Vibration Sensor for Automatic On/Off

5. Charging and Power Bank Function

5.1 Charging the Bicycle Light

The light features integrated charging technology with a Type-C port.

  • Connect the provided Type-C charging cable to the light's charging port and a suitable USB power source.
  • The light has an automatic power-off feature when fully charged to prevent overcharging and protect battery lifespan.
  • Charging time is approximately 3-5 hours.

5.2 Power Bank Function

The integrated charging and discharging technology allows the bicycle light to function as a power bank.

  • Use the discharge adapter and your device's charging cable to connect electronic devices (e.g., bike computers, smartphones, action cameras) to the bicycle light for charging.
Integrated Charging and Discharging Technology
Charging and Power Bank Functionality

5.3 Battery Level Display

The light provides real-time monitoring of the remaining power.

  • In the power-off state, a single press of the button will display the battery level for 3 seconds.
  • When powered on or functioning as a power bank, the battery level is displayed in real-time via the indicator light.

Indicator Status:

  • Manual Mode:
    • Solid Green: 100%-30% battery
    • Flashing Green Slowly: 29%-10% battery
    • Flashing Green and Red Rapidly: Less than 10% battery
  • Intelligent Mode:
    • Solid Blue: 100%-30% battery
    • Flashing Blue Slowly: 29%-10% battery
    • Flashing Blue and Red Rapidly: Less than 10% battery
  • Charging Indicator: The charging indicator light breathes red when charging and turns green (manual mode) or blue (smart mode) when fully charged.
Battery Level Display Guide
Battery Level Indicator Details

6. Specifications

DL1700 Model Specifications

ModeOutputRuntime
Focus BeamHigh: 1700 Lumens2h
Medium: 800 Lumens4h
Low: 400 Lumens7h
Flood BeamHigh: 800 Lumens3h 20min
Low: 400 Lumens6h
Flash200 Lumens18h
Turbo (Remote)1900 LumensN/A

Note: The above parameters are approximate average values from TowILD laboratory tests, with 4000mAh rechargeable Lithium-ion batteries in the laboratory tests, may change with the lamps and lanterns and the use of the environment.

DL1200S Model Specifications

ModeOutputRuntime
General ModeHigh: 1200 Lumens2h
Medium: 600 Lumens3h 30min
Low: 300 Lumens6h 30min
Warning ModeNight Warning (Breathing Flash): 300 Lumens12h
Day Warning: 600 Lumens12h
Turbo (Remote)1500 LumensN/A

Note: Battery capacity 3200mAh (parameter detection comes from TowILD Laboratory).

General Specifications for Both Models:

  • Material: Hardware + Plastic (Aluminum Alloy Case for impact and drop resistance)
  • Dimensions: 54 x 42 x 58 mm
  • Weight: Approximately 158g
  • Waterproof Rating: IPX6
  • Charging Port: Type-C
  • Features: Intelligent Sensing (Vibration Sensor), Intelligent Temperature Control
Compact Size and Wind-Breaking Shape
Compact and Aerodynamic Design
Aluminum Alloy Case
Durable Aluminum Alloy Case
IPX6 Waterproof Rating
IPX6 Waterproof Rating

7. Maintenance

  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the light in a cool, dry place when not in use. Avoid extreme temperatures.
  • Battery Care: As mentioned in safety information, charge the light every three months if unused for a long time to preserve battery life.
  • Waterproofing: Always ensure the Type-C charging port's rubber plug is securely closed to maintain IPX6 waterproof integrity.

8. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Check if the power button is pressed correctly (long press for 0.5 seconds).
  • Remote control not working: Ensure the remote is paired correctly (refer to Section 3.2). Check the remote's battery if applicable (though not explicitly mentioned, it's a common remote issue).
  • Light turns off automatically: If in intelligent mode, this is normal behavior after 2 minutes of no vibration. A touch or movement will reactivate it. If it turns off unexpectedly in manual mode, the battery might be low.
  • Charging issues: Ensure the Type-C cable is properly connected and the power source is functional.

9. User Tips

  • The integrated charging/discharging feature allows the light to be used as a power bank, which is convenient for charging other devices on the go.
  • The intelligent mode with the vibration sensor is highly praised for its energy-saving capabilities and automatic on/off function, making it ideal for rides with frequent stops.
  • The wireless remote control significantly enhances safety by allowing riders to change light modes without taking their hands off the handlebars.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official TOWILD website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

© 2023 TOWILD. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.