TOWILD BR800S

Contents

TOWILD BR800S Bicycle Light User Manual

Model: BR800S | Brand: TOWILD

1. Introduction

Thank you for choosing the TOWILD BR800S Bicycle Light. This manual provides essential information for the safe and effective use, installation, and maintenance of your new bicycle light. Please read it thoroughly before use and retain it for future reference.

The BR800S is a high-performance bicycle headlight designed for both mountain biking (MTB) and road cycling. It features a maximum output of 800 lumens, a replaceable battery, Type-C charging, and intelligent sensing capabilities, all housed in a durable aluminum alloy shell.

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x BR800S Bicycle Light
  • 1 x Handlebar Mount
  • 1 x Compatible Base for GoPro
  • 1 x Type-C Charging Cable
  • 1 x User Manual

3. Specifications

FeatureDescription
Model NumberBR800S
Max Output800 Lumens
Battery2600mAh 18650 Lithium-ion (Replaceable)
Charging PortType-C
Body MaterialAluminum Alloy
Waterproof LevelIPX6
Intelligent SensingYes
Support Dimmer5 - 8 Files (Modes)
Mounting PlacementHandlebar
Weight115g / 4.05oz
CertificationsCE, FCC

Performance Table

Performance table for TOWILD BR800S Bicycle Light showing modes, output, runtime, distance, intensity, impact resistance, and waterproof rating.

Image: Performance table detailing light modes, output (lumens), runtime, beam distance, intensity, impact resistance (1m), and waterproof rating (IPX-6). Note: Parameters are approximate, based on 1*2600mAh 18650 lithium-ion battery in laboratory tests, and may vary with usage and environment.

4. Key Features

  • Bright Illumination: 800 lumen max output to clearly illuminate obstacles.
  • Safe Beam Design: Features a glass diffuser for even light distribution and a cut-off beam to prevent dazzling oncoming traffic, adhering to German STVZO standard.
  • Replaceable Battery: Equipped with a 2600mAh high-capacity battery, compatible with standard 18650 batteries.
  • USB Type-C Charging: Convenient and reversible Type-C charging port.
  • Compact & Lightweight: Weighs only 115g (4.05oz) for minimal impact on your ride.
  • Rotatable Light Head: Easy to disassemble and allows for flexible mounting above or below the handlebars.
  • Intelligent Temperature Control: Automatically lowers brightness if the lamp head temperature reaches 65°C to prevent overheating.
  • Wireless Remote Control: For convenient mode switching without removing hands from the handlebars.
  • Smart Start/Stop: Automatically turns on when shaken in smart mode.
Image showing key features of the TOWILD BR800S bicycle light including 2600mAh battery, replaceable battery, aluminum alloy shell, 5 light modes, 150M beam distance, IPX6 waterproof, wireless remote control, and intelligent temperature control.

Image: Overview of intelligent bicycle light features.

Image showing the TOWILD BR800S bicycle light and stating it weighs only 115g, emphasizing its lightweight design.

Image: The BR800S light, highlighting its lightweight design at 115g.

Image illustrating the cut-off light beam feature of the BR800S, compliant with German STVZO standard, to prevent dazzling oncoming traffic.

Image: Illustration of the cut-off light beam, designed to prevent dazzling.

Image showing the TOWILD BR800S bicycle light with intelligent temperature control, indicating it lowers brightness if the lamp head reaches 65 degrees Celsius.

Image: The BR800S light demonstrating intelligent temperature control.

5. Installation

5.1 Mounting the Light

The BR800S can be mounted using the provided handlebar mount or a compatible GoPro mount. The rotatable light head allows for flexible positioning.

  1. Attach the handlebar mount to your bicycle's handlebar. Ensure it is securely fastened.
  2. Slide the BR800S light onto the mount until it clicks into place.
  3. Adjust the light's angle to ensure optimal illumination of the road ahead without blinding oncoming traffic. The light can be positioned both above and below the handlebars.
Image showing the TOWILD BR800S bicycle light being mounted on a handlebar, demonstrating how it can be installed both above and below the handlebars.

Image: Demonstrating flexible mounting options for the BR800S.

Image showing the rotatable light head of the BR800S being disassembled, indicating easy removal and installation.

Image: The rotatable light head for easy disassembly and mounting.

5.2 Battery Installation

The BR800S uses a replaceable 18650 battery. To install or replace the battery:

  1. Twist the front section of the light counter-clockwise to open the battery compartment.
  2. Insert the 18650 battery with the positive (+) end facing towards the light head.
  3. Twist the front section clockwise to securely close the battery compartment.
Image showing a replaceable 2600mAh 18650 battery and a graph illustrating the runtime of the BR800S light at different lumen outputs.

Image: Replaceable 18650 battery and runtime chart.

6. Operation

6.1 Power On/Off and Mode Switching

The BR800S features both Smart mode and Manual mode.

  • To switch between Smart/Manual mode: When the light is off, long press the main button for 3 seconds. The indicator light will be blue for Smart mode and green for Manual mode.
  • To turn on/off: Short press the main button to turn on. Long press for 0.8 seconds to turn off.
  • To switch light modes: Short press the main button while the light is on to cycle through the available brightness and flash modes.
Image explaining Smart Start/Stop mode: long press 3s to switch between smart (blue indicator) and manual (green indicator) modes. In smart mode, the light turns on automatically when shaken.

Image: Smart Start/Stop mode explanation.

6.2 Smart Mode Functionality

In Smart mode, the light enters a standby state when turned off. The indicator light will flash every two seconds. In this state, you can turn on the light via the wireless remote control for up to 1 hour. After 1 hour, the remote control cannot turn on the light, and you will need to manually turn on the light.

When shaken, the main light will turn on automatically in Smart mode.

6.3 Wireless Remote Control

The wireless remote control allows for convenient operation of the light.

  • Pairing: When the bicycle is turned on, press and hold the light switch for 3 seconds to enter pairing state. The main light flashes at the same time. The button indicator light is always red. Press and hold any button on the remote control until the pairing light goes out, and the pairing is successful.
  • Note: During pairing, the long-press of the remote control button generally does not exceed 5 seconds. If the long-press time expires, please bring the remote control close to the BR1000 (likely a typo, should be BR800S). If it still can't be paired, check if the remote control has an indicator light on. If not, the battery of the remote control may need to be replaced.
  • Remote Functions:
    • Click to switch between warning and lighting modes.
    • Long press 0.5s to turn on, long press 0.8s to turn off. Click to switch gear (brightness level).
    • One key to the brightest mode immediately; long press to enter the highest brightness, release to return to the previous gear.
Image showing the wireless remote control for the TOWILD BR800S bicycle light and detailing its pairing instructions and button functions.

Image: Wireless remote control and its functions.

6.4 Power Display

The indicator light on the BR800S provides battery status:

  • When power off, click the button to display the power.
  • Smart Mode (Blue Indicator):
    • 100-30% battery: Blue light is always on.
    • 29-10% battery: Blue light is slow flashing.
    • Lower than 10% battery: Blue-red flash.
  • Manual Mode (Green Indicator):
    • 100-30% battery: Green light is long light (always on).
    • 29-10% battery: Green light is slow flash.
    • Lower than 10% battery: Green-red flash.
Image showing the power display indicators for the BR800S in both Smart (blue light) and Manual (green light) modes, indicating battery levels.

Image: Power display indicators for Smart and Manual modes.

7. Battery and Charging

The BR800S is equipped with a 2600mAh 18650 lithium-ion battery and supports Type-C fast charging. A full charge typically takes four hours.

  • Connect the provided Type-C charging cable to the light's charging port and a USB power source (e.g., computer, wall adapter).
  • The power indicator will show charging status.
  • Ensure the tail plug is closed after charging to maintain IPX6 waterproof rating.
Image showing the TOWILD BR800S bicycle light being charged via a Type-C USB cable.

Image: Type-C charging port in use.

8. Maintenance

  • Cleaning: Wipe the light body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Water Resistance: The BR800S has an IPX6 waterproof rating. To maintain this, always ensure the tail plug (charging port cover) is securely closed, especially after charging or before riding in wet conditions.
  • Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to approximately 50% and recharge every few months to prolong battery life.
  • Battery Care: Use only compatible 18650 batteries. If the battery is damaged or shows signs of leakage, replace it immediately.
Image showing the TOWILD BR800S bicycle light with water droplets, indicating its IPX6 waterproof rating, and a reminder to close the tail plug.

Image: IPX6 Waterproof feature with a note to close the tail plug.

9. Troubleshooting

  • Light not turning on:
    • Check if the battery is correctly installed and charged.
    • Ensure the light is not in standby mode (if using Smart mode) or try turning it on manually.
  • Remote control not working:
    • Ensure the light is turned on and within range.
    • Re-attempt pairing the remote control with the light as described in Section 6.3.
    • Check the remote control's battery.
  • Light dims unexpectedly:
    • This may be due to the intelligent temperature control system activating if the lamp head reaches 65°C. The brightness will return to normal once the temperature drops.
    • Check the battery level; low battery can cause reduced output.
  • Charging issues:
    • Ensure the Type-C cable is properly connected to both the light and the power source.
    • Try a different charging cable or power adapter.

10. User Tips

  • For optimal visibility and safety, use the appropriate light mode for your riding conditions (e.g., High brightness for dark trails, Day warning flash for daytime visibility).
  • Regularly check the battery indicator to avoid running out of power during your ride.
  • Take advantage of the flexible mounting options to position the light for your specific bike setup and riding style.

11. Warranty and Support

The TOWILD BR800S Bicycle Light comes with a 2-Year guarantee from the date of purchase. This warranty covers manufacturing defects and ensures professional service.

For any questions, technical support, or warranty claims, please contact the professional riding manufacturer directly through their official channels. Please have your purchase receipt and product model number ready when contacting support.

Video: A short demonstration of the TOWILD BR800S bicycle light in use, highlighting its lightweight design, high-capacity battery, edge lighting, multiple modes, and flexible mounting options.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.