Introduction
The UGREEN BT503 is a versatile 2-in-1 Bluetooth 5.3 audio adapter designed to seamlessly switch between transmitter (TX) and receiver (RX) modes. It enables you to add Bluetooth functionality to non-Bluetooth devices, supporting high-fidelity audio codecs like aptX HD, aptX LL, aptX, SBC, and AAC for an enhanced listening experience. Featuring an intuitive OLED display and long battery life, the BT503 is ideal for use with TVs, airplanes, car audio systems, headphones, and speakers.

Image: UGREEN BT503 2-in-1 Bluetooth 5.3 Adapter, showcasing its compact design.
Package Contents
- UGREEN BT503 Wireless Adapter
- 3.5mm Audio Cable (integrated or separate, implied by images)
- USB-C Charging Cable (0.5m)
- User Manual (this document)
Product Overview
Familiarize yourself with the various components of your UGREEN BT503 adapter:

Image: Diagram of the UGREEN BT503 adapter, highlighting its features including the OLED display, 3.5mm audio jack, function buttons, slide switch, USB-C charging port, microphone, and reset hole.
- OLED Display: Shows Volume Level (16-level adjustable), Mode (TX/RX), Bluetooth Name (UGREEN-BT503), Connected Devices (A, B), Codecs (e.g., aptX-HD), and Battery Level.
- 3.5mm Audio Jack: For connecting to audio sources or output devices.
- Function Buttons: Includes an "OK" button (play/pause, answer/end call, pairing) and navigation buttons (previous/next track, volume up/down).
- Slide Switch (RX/OFF/TX): Selects Receiver mode, powers off the device, or selects Transmitter mode.
- USB-C Charging Port: For charging the internal battery.
- Microphone: For hands-free calling in RX mode.
- Reset Hole: For factory reset if needed.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BT503 |
| Wireless Type | Bluetooth 5.3 |
| Interface | 3.5 MM Audio |
| Supported Codecs | aptX HD, aptX LL, aptX, SBC, AAC |
| Operating Modes | Transmitter (TX) and Receiver (RX) |
| Display | OLED Screen |
| Battery Life (TX Mode) | Up to 28 hours |
| Battery Life (RX Mode) | Up to 32 hours |
| Charging Time | Approximately 2 hours |
| Charging Port | USB-C |
| Latency | aptX LL: 125ms, aptX: 256-282ms, aptX HD: 245-275ms, aptX HQ: 398ms |
Note: Battery life may vary based on usage and volume levels.
Setup
1. Charging the Device
Before first use, fully charge your UGREEN BT503 adapter. Connect the provided USB-C charging cable to the USB-C port on the adapter and plug the other end into a standard USB power adapter (not included). The OLED display will indicate the charging status. A full charge takes approximately 2 hours.

Image: UGREEN BT503 connected to a USB-C charger, illustrating long battery life in TX (28H) and RX (32H) modes.
2. Power On/Off
- To Power On: Slide the switch to either the "TX" or "RX" position. The OLED display will light up.
- To Power Off: Slide the switch to the "OFF" position. The display will turn off.
Operating Modes
Transmitter (TX) Mode
In TX mode, the BT503 transmits audio from a non-Bluetooth device (e.g., TV, airplane entertainment system, gym equipment) to your Bluetooth headphones, earbuds, or speakers.
- Slide the switch to the "TX" position. The device will enter pairing mode, and the OLED display will show "Pairing".
- Connect the BT503's 3.5mm audio jack to the audio output port of your non-Bluetooth device.
- Put your Bluetooth headphones/earbuds/speaker into pairing mode.
- On the BT503, single-click the "OK" button to search for nearby Bluetooth devices. The OLED display will show available devices.
- Select the desired device from the list using the navigation buttons and confirm with "OK". Once connected, the display will show the connected device's name and the active audio codec.

Image: Step-by-step guide for pairing earbuds in TX mode, showing the slide switch, earbuds in pairing mode, single-click action, and pairing completion.

Image: Two individuals enjoying a movie with headphones connected via the BT503 in TX mode.
Receiver (RX) Mode
In RX mode, the BT503 receives audio from your Bluetooth-enabled device (e.g., smartphone, tablet, computer) and outputs it to a non-Bluetooth audio system (e.g., car stereo, home amplifier, wired speakers).
- Slide the switch to the "RX" position. The device will enter pairing mode, and the OLED display will show "Pairing".
- Connect the BT503's 3.5mm audio jack to the audio input port of your non-Bluetooth audio system.
- On your Bluetooth-enabled device (e.g., smartphone), open Bluetooth settings and search for "UGREEN-BT503".
- Select "UGREEN-BT503" to connect. Once connected, the display will show the connected device's name and the active audio codec.

Image: Step-by-step guide for pairing a phone in RX mode, showing the slide switch, pairing screen, selecting the device, and pairing completion.

Image: UGREEN BT503 used in a car to stream music from a smartphone to the car's audio system.
Dual Device Pairing
The BT503 supports connecting to two Bluetooth devices simultaneously in both TX and RX modes, though music playback is limited to one device at a time.
Dual Pairing in TX Mode:
- Connect the first pair of Bluetooth headphones/earbuds as described in the TX Mode section.
- Once the first device is connected, put the second pair of Bluetooth headphones/earbuds into pairing mode.
- On the BT503, double-click the "OK" button to enter pairing mode for the second device.
- Select the second device from the list on the OLED display and confirm with "OK".

Image: Instructions for pairing a second pair of earbuds in TX mode, showing the double-click action and selection process.
Dual Pairing in RX Mode:
- Connect the first Bluetooth-enabled device (e.g., smartphone) as described in the RX Mode section.
- Once the first device is connected, double-click the "OK" button on the BT503. The display will show "Pairing".
- On your second Bluetooth-enabled device, search for "UGREEN-BT503" in its Bluetooth settings and connect.

Image: Instructions for pairing a second phone in RX mode, showing the double-click action and connection process. Note: Only one device can play music at a time.
Important Note: While two devices can be paired, the BT503 only supports music playback from one device at a time. To switch audio sources, pause playback on the currently active device.
Call Functionality (RX Mode Only)
When in RX mode and connected to a smartphone, the built-in microphone allows for hands-free calls.
- Answer/End Call: Single-click the "OK" button.
- Reject Call: Press and hold the "OK" button for 2 seconds.

Image: Illustration of using the BT503 for hands-free calls in a car, showing single-click for answer/end and 2-second press for reject.
OLED Display Information
The OLED screen provides real-time status updates:

Image: Close-up of the UGREEN BT503's OLED display, indicating Volume Level, Mode, Bluetooth Name, Connected Devices, Codecs, and Battery Level.
- Volume Level: 16-level adjustable.
- Mode: Displays "TX" or "RX".
- Bluetooth Name: "UGREEN-BT503".
- Connected Devices: Shows "A" and "B" for two paired devices.
- Codecs: Indicates the active audio codec (e.g., aptX-HD, SBC).
- Battery Level: Percentage indicator.
Maintenance
- Keep the device dry. Moisture can damage internal circuits.
- Do not expose to extreme temperatures.
- Clean with a soft, dry cloth. Avoid harsh chemicals.
- Store in a cool, dry place when not in use.
Troubleshooting
- Device won't power on: Ensure the battery is charged. Connect to a USB-C charger.
- Cannot pair with a device:
- Ensure the BT503 is in the correct mode (TX or RX).
- Make sure the BT503 and the target device are in pairing mode and within range.
- Clear previous pairings on both devices and try again.
- Restart both devices.
- No sound or poor audio quality:
- Check all cable connections (3.5mm audio).
- Ensure volume levels are adjusted on both the BT503 and the connected audio device/system.
- Verify that the correct audio input/output is selected on your external devices.
- Ensure only one paired device is actively playing audio.
- OLED display is blank: The device might be off or the battery is depleted. Charge the device.
- Device unresponsive: Use a thin pin to press the reset button located in the reset hole.
User Tips
- For the best audio quality, ensure both the BT503 and your connected headphones/speakers support aptX HD or aptX LL codecs.
- When using in TX mode with an airplane entertainment system, ensure the system's audio output is active and at a suitable volume.
- To maximize battery life, power off the device when not in use.
Warranty and Support
For warranty information and technical support, please refer to the official UGREEN website or contact your retailer. Keep your proof of purchase for warranty claims.