Continental ARS 548 RDI

Contents

Continental ARS 548 4D Imaging Millimeter Wave Radar

Instruction Manual

1. Product Overview

The Continental ARS 548 RDI is a high-precision 4D imaging millimeter wave radar sensor designed for advanced driver-assistance systems (ADAS) and autonomous driving applications. It operates at 77 GHz and provides long-range detection capabilities up to 300 meters, offering stereoscopic perception for enhanced environmental understanding.

Continental ARS548 RDI 4D high precision imaging millimeter wave radar unit
Continental ARS548 RDI 4D high precision imaging millimeter wave radar unit.

This rugged sensor independently measures distance, speed (Doppler principle), and angle of objects without reflectors. It utilizes a pulsed compression and New Frequency Modulation (NFM) measurement procedure. The improved range resolution is available in the complete Field of View (FoV) with a real-time scanning frequency of 20 times per second. Simultaneous detection output of target distances up to 300 meters, relative speed, and angle for each target in azimuth and elevation is provided with RDI (Radar Detection Interface).

Key Applications:

  • Anti-collision protection for autonomous vehicles.
  • Headway control for near and far range.
  • Area monitoring for hazardous or restricted zones.
  • Classification of objects, including height measurement.
  • Object detection in crowded or unclear environments.

Advantages:

  • Fast and Safe: Excellent measuring performance and high operational safety.
  • Reliable: Fail-safe operation under all circumstances.
  • Robust and New Design: Utilizes the newest radar technology for mass production in automotive supply industry.

2. Setup and Installation

Proper installation is crucial for the optimal performance of the ARS 548 RDI radar. Due to the complexity and safety-critical nature of its application, professional installation is highly recommended.

Components:

  • Continental ARS 548 RDI Radar Unit
  • Wiring Harness (specific to application)
  • DB9 Connector (for data interface, e.g., CAN)
Front view of the Continental ARS 548 RDI radar unit
Front view of the Continental ARS 548 RDI radar unit.

Connection Points:

The radar unit features two multi-pin connectors on its rear for power, data, and control signals. Ensure all connections are secure and correctly oriented to prevent damage.

Rear view of the radar unit showing two multi-pin connectors
Rear view of the radar unit showing two multi-pin connectors.
Radar unit with wiring harness and DB9 connector for data interface
Radar unit with wiring harness connected to its ports, and a separate DB9 connector for data interface.

Mounting:

The radar should be mounted securely in a location that provides an unobstructed view of the area to be monitored. Refer to the vehicle or system-specific integration guidelines for optimal placement and calibration. The housing is designed for robust outdoor use.

3. Operating Principles

The ARS 548 RDI operates by emitting millimeter waves and analyzing the reflected signals to detect objects, measure their distance, speed, and angular position (azimuth and elevation). The 4D imaging capability provides a rich point cloud representation of the environment.

Data Output:

The sensor provides real-time data on detected objects, including their ID, X and Y coordinates, height, speed, and Radar Cross Section (RCS). This information is typically transmitted via a BroadR-Reach Ethernet interface.

Screenshot of radar detection software interface showing object data and a road scene
Example of radar detection software interface, displaying detected objects with their coordinates, height, and speed, alongside a visual representation of the scene.

Range and Azimuth Performance:

The radar's detection range varies based on the object type and its Radar Cross Section (RCS). The graph below illustrates typical range performance across different azimuth angles for various targets.

Graph showing ARS540 radar range over azimuth angle for different object types
ARS540/ARS548 RDI radar range performance over azimuth angle for various targets (Truck, Car, Pedestrian, Bicycle).

4. Maintenance

The Continental ARS 548 RDI is designed for robust and maintenance-free operation under normal conditions. However, periodic checks can help ensure its longevity and performance.

  • Cleaning: Keep the front surface (radome) of the radar unit clean from dirt, ice, snow, or other obstructions that could interfere with radar signal transmission and reception. Use a soft cloth and mild cleaning solution if necessary.
  • Physical Inspection: Periodically inspect the unit for any signs of physical damage, loose connections, or corrosion on the connectors.
  • Software Updates: Ensure the radar's firmware and associated control software are kept up-to-date as recommended by Continental or the system integrator.
  • Environmental Protection: While the unit has an IP6K9K rating, avoid exposing it to extreme mechanical stress or harsh chemicals.

5. Troubleshooting

If you encounter issues with your Continental ARS 548 RDI radar, consider the following basic troubleshooting steps:

  • No Detection/Intermittent Detection:
    • Check for any obstructions in front of the radar unit (dirt, ice, foreign objects).
    • Verify all power and data connections are secure and correctly seated.
    • Ensure the radar unit is receiving adequate power within the specified voltage range.
    • Confirm that the radar's field of view is not blocked by vehicle components or external structures.
  • Communication Errors:
    • Check the integrity of the Ethernet (BroadR-Reach) cable and connectors.
    • Verify the communication settings (e.g., IP address, port) in the host system's software.
    • Ensure the host system's network interface is functioning correctly.
  • System Malfunction:
    • Perform a power cycle of the radar unit and the connected system.
    • Consult the diagnostic tools or logs provided by your system integrator for specific error codes.

For persistent issues, contact your system integrator or Continental technical support.

6. Specifications

The following table details the technical specifications for the Continental ARS 540 / ARS 548 RDI Premium Long Range Radar Sensor.

Detailed specifications table for Continental ARS 540 / ARS 548 RDI radar
Detailed specifications for Continental ARS 540 / ARS 548 RDI radar.
Continental ARS 540 / ARS 548 RDI Premium Long Range Radar Sensor 77 GHz
CategoryParameterValue
Measuring PerformanceDistance range0.2 ... 300 m
Resolution distance measuring0.4 m
Accuracy distance measuring±0.1 ... ±0.3 m depending on ego speed (thresholds at 115/110 kph)
Azimuth angle augmentation (field of view FoV)±60°
Elevation angle augmentation (field of view FoV)±4° ... ±20° @ 300m, ±20° @ -50m
Azimuth beam width (3 dB)±2.5°, 1.68°
Elevation beam width (3 dB)±2.3°
Operating ConditionsRadar operating frequency band76...77 GHz
Main power supplyat 12 V DC
Power consumption~18 W / 1.5 A typ., ~23 W maximum / ~2.0 A peak current
Overvoltage>18 V DC sensor functions deactivated
Operating / storage temperature-40°C ... +85°C / -40°C ... +105°C
Life time1,500 h or 10 years or 300,000 km
ShockMechanical acc. LV 124
VibrationMechanical acc. LV 124
Protection ratingIP6K9K (water proof, high-pressure cleaning – ISO 16750+20653) IP6K7 (dust proof – ISO 20653)
Connections1 x BRR BroadR-Reach Ethernet 100 Mbit/s
HousingDimensions / weightW * L * H (mm) / (mass) 137 * 90 * 39 (65.5 with connector) / app. <500 g
Housing radome / frontPBT GF 30 black (BASF-Ultramid® B4300G6 LS SW 15073) / PA-4T100 (BASF-Ultramid® C3U)
MaterialDie cast aluminum / EN AW 5754 (3.3535) almg3 pressed-formed aluminium
MiscellaneousMeasuring principle (Doppler's principle) in one measuring cycle due to pulse compression with stepped frequency modulation to improve range resolution. Independent measurement of distance, speed, azimuth and elevation angle.
InterfacesVersion ARS 540/548 RDISensor with object output, BRR BroadR-Reach Ethernet 100 Mbit/s
Version ARS 548 RDIConnector type CT-A, 6 pin Main connector, 2 pin Ethernet connector, Housing M-A mounting only with own designed bracket

7. Warranty and Support

This Continental ARS 548 RDI radar unit is typically sold as a component for integration into larger systems. Warranty and support terms are generally provided by the seller or system integrator.

  • Warranty: Please refer to the specific warranty terms provided at the point of purchase.
  • Technical Support: For technical assistance, troubleshooting beyond basic steps, or integration guidance, please contact your supplier or the system integrator who provided the complete solution.
  • Official Documentation: For detailed technical documentation, including specific wiring diagrams and software integration guides, please consult Continental's official resources or your authorized distributor.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.