1. Introduction
Thank you for choosing the UGREEN HiTune H5 True Wireless Earbuds. These earbuds feature advanced Bluetooth 5.3 technology, AI call noise reduction, and a comfortable in-ear design for an immersive audio experience. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
Image: UGREEN HiTune H5 TWS Earphones with charging case, highlighting Bluetooth 5.3 and 100ms Low Latency.
2. Package Contents
Please check the package for the following items:
- 1 x Charging Case
- 1 x Pair of UGREEN HiTune H5 Earbuds
- 1 x USB-C Charging Cable
- 1 x User Manual
- Replaceable Ear Pads Set (if included with your model)
Image: Contents of the UGREEN HiTune H5 package, including earbuds, charging case, cable, and manual.
3. Setup and First Use
3.1 Initial Charging
Before first use, fully charge the earbuds and the charging case.
- Place the earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the case and to a power source.
- The indicator lights on the case will show the charging status.
Charging Times:
- Earbuds: Approximately 1.5 hours
- Charging Case: Approximately 2 hours
3.2 Pairing with Your Device
The HiTune H5 earbuds feature one-step pairing for convenience.
- Ensure the earbuds are in the charging case and the case has sufficient battery.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and search for available devices.
- Select "UGREEN HiTune H5" from the list to connect.
- Once connected, the earbuds will automatically pair with your device when you open the charging case for subsequent uses.
Image: Illustrates the one-step pairing process with a smartphone.
4. Operating Your Earbuds
4.1 Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
4.2 Smart Touch Controls
The HiTune H5 earbuds feature intuitive touch controls on each earbud. Refer to the diagram below for specific functions:
Image: Detailed touch control diagram for both left and right earbuds.
| Action | Left Earbud | Right Earbud |
|---|---|---|
| Play/Pause | Double Tap (X2) | Double Tap (X2) |
| Previous Song | Hold (1 second) | N/A |
| Next Song | N/A | Hold (1 second) |
| Answer Call | Double Tap (X2) | Double Tap (X2) |
| Hang Up Call | Double Tap (X2) | Double Tap (X2) |
| Reject Call | Hold (1 second) | Hold (1 second) |
| Voice Assistant | Triple Tap (X3) | N/A |
| Game Mode | N/A | Triple Tap (X3) |
Note: X1 = Press once, X2 = Press twice, X3 = Press three times, Hold = Press and hold for 1 second.
4.3 Call Noise Reduction
The HiTune H5 earbuds feature 4-Mic AI Call Noise Reduction technology. This system works in real-time to separate environmental interference noise and extract clear vocals, ensuring high-quality calls even in noisy environments.
Image: Demonstrates the 4-Mic AI Call Noise Reduction feature for clear communication.
4.4 Low Latency Gaming Mode
Activate Game Mode for an ultra-low latency experience (approximately 100ms), providing synchronized audio and visuals for an enhanced gaming experience. Activate via the right earbud's triple-tap control.
Image: Visual representation of the low latency gaming experience.
5. Maintenance and Care
5.1 Cleaning
- Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
- Do not use harsh chemicals or abrasive materials.
- Ensure no moisture enters the earbud openings.
5.2 Water Resistance
The UGREEN HiTune H5 earbuds are IPX5 water-resistant, meaning they can withstand light rain, accidental splashes, and sweat. This makes them suitable for workouts and outdoor activities.
Important: The charging case is NOT waterproof. Do not expose the charging case to water or moisture.
Image: Demonstrates the IPX5 water-resistant capabilities of the earbuds.
5.3 Storage
When not in use, store the earbuds in their charging case to protect them and ensure they are charged for your next use. Store in a cool, dry place away from extreme temperatures.
6. Troubleshooting
If you encounter any issues with your UGREEN HiTune H5 earbuds, please try the following steps:
- No Sound: Ensure the earbuds are charged, properly paired, and the volume on your device is turned up.
- Pairing Issues: Turn off Bluetooth on your device, place earbuds back in the case, close and reopen the lid, then try pairing again. Ensure no other devices are trying to connect simultaneously.
- One Earbud Not Working: Place both earbuds back in the charging case, close the lid, wait a few seconds, then take them out again. This often re-syncs them.
- Charging Problems: Check the USB-C cable and charging port for any damage. Ensure the charging contacts on both the earbuds and case are clean and dry.
- Poor Call Quality: Ensure the earbuds are properly seated in your ears. Move to a quieter environment if possible, as AI noise reduction works best against consistent background noise.
If the problem persists, please refer to the UGREEN official support channels for further assistance.
7. Specifications
Image: Key technical specifications of the UGREEN HiTune H5.
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Name | W201 (HiTune H5) |
| Product Name | UGREEN HiTune H5 True Wireless Earbuds |
| Bluetooth Version | 5.3 |
| Bluetooth Protocol | HFP, AVRCP, A2DP, BLE, SPP |
| Transmission Distance | Up to 10m |
| Waterproof Rating | IPX5 (Earbuds only) |
| Audio Decoding | AAC, SBC |
| Battery Life (Single Charge) | Up to 6 hours |
| Battery Life (With Charging Case) | Up to 26 hours |
| Earbud Battery Capacity | 35mAh |
| Charging Case Battery Capacity | 400mAh |
| Charging Port | USB-C |
| Driver Diameter | 13.6mm |
| Material | ABS, PVC |
| Earbuds Weight | About 39.2g |
| Package Weight | About 101g |
| Package Size | 150mm x 100mm x 31mm |
| Certification | FCC, CE |
| Origin | Mainland China |
| Active Noise-Cancellation | No |
| Volume Control | Yes (via connected device) |
| Control Button | No (Touch controls only) |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Style | In-ear |
| Support APP | No |
Image: Additional specifications and dimensions of the charging case.
8. User Tips
- Optimal Fit: Experiment with the included ear tips to find the best fit for your ears. A good seal enhances sound quality and call clarity.
- Maximize Battery Life: Always place the earbuds back into the charging case when not in use. This ensures they are charged and protected.
- Gaming Experience: Remember to activate Game Mode (triple-tap right earbud) for the lowest latency during gaming sessions.
- Call Clarity: For the best call experience, ensure the microphones are not obstructed and try to speak clearly.
9. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information, technical support, or any product-related inquiries, please contact UGREEN customer service through their official website or the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.
