1. Introduction
The JW-40 Mini Console DMX Controller is a compact and versatile lighting control solution designed for various stage, party, DJ, disco, live concert, KTV, and night club applications. It offers intuitive control over up to 40 DMX channels and supports 5 programmable chase effects, making it suitable for both beginners and experienced users.
Figure 1: JW-40 Mini Console DMX Controller and included USB-C charging cable.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x JW-40 Mini Console DMX Controller
- 1 x USB-C Charging Cable
Figure 2: Included items: Console and Charging Cable.
3. Specifications
| Feature | Detail |
|---|---|
| Control Channels | Maximum 40 channels |
| Chase Effects | 5 programmable chase effects, each up to 50 single steps |
| Power Input | 90-240V 50-60Hz |
| TYPE-C Plug Input | 5V-2A |
| Rated Power | 10W |
| Battery Capacity | 2600mAh |
| Battery Life | Approximately 6 hours |
| Charging Time | Approximately 2 hours |
| Special Features | Power failure memory, automatic power-on to previous mode, fixture address setting aligned to 8CH for lamp lifting function, luminous buttons. |
4. Setup
- Powering On: The JW-40 can be powered via its internal battery or by connecting the included USB-C charging cable to a 5V-2A power source. The device is designed for plug-and-play operation.
- Connecting DMX Fixtures: Connect your DMX-compatible stage lights or other fixtures to the DMX output port on the console using a standard DMX cable.
- Fixture Addressing: Ensure your DMX fixtures are correctly addressed according to their individual manuals. When the fixture address setting is aligned to 8CH, the console can realize the function of lifting the lamp.
Figure 3: The JW-40 console, capable of controlling 40 channels.
5. Operating Instructions
5.1 Manual Mode Operation
In manual mode, you can directly control individual DMX channels using the faders. The buttons with luminous prompts indicate the current operational status.
- Use the channel faders (CH1-CH8) to adjust the intensity or parameter values of the connected DMX fixtures.
- The console supports control over a maximum of 40 channels. Depending on your fixture's DMX address and channel assignment, you may need to switch between channel banks if available (not explicitly detailed in provided info, assuming standard DMX controller operation).
5.2 Programming Chase Effects
The JW-40 supports 5 programmable CHASE effects, each capable of holding up to 50 single steps. Follow these steps to program a chase:
- Enter Programming Mode: In the idle state, press and hold the "CHASE" button until all 5 keys in the light selection area illuminate.
- Select Chase Number: Press the corresponding key (1-5) to select the CHASE number you wish to program.
- Enter Single-Step Editing: The console will enter the single-step editing state.
- Set Single-Step Scene: Push the faders to set the desired scene effect for the current step. This is similar to operating in manual mode.
- Save and Next Step: Press the "UP" button to save the current step and move to the next step for editing.
- Repeat: Repeat step 4 and 5 for all desired steps within the chase (up to 50 steps).
- Exit Programming: After editing all steps, press the "MANUAL" button to exit the programming state and save the entire chase effect.
Figure 4: The JW-40 supports 5 programmable chase effects for dynamic lighting scenes.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the controller. Do not use abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if storing for extended periods.
7. Troubleshooting
- No Power:
- Ensure the power switch is in the ON position.
- If using battery power, check if the battery is charged. Connect the USB-C charging cable.
- If using external power, ensure the USB-C cable is properly connected to a 5V-2A power source.
- Lights Not Responding:
- Verify that DMX cables are securely connected between the controller and all fixtures.
- Check that DMX addresses on your fixtures are correctly set and match the channels you are trying to control on the console.
- Ensure the DMX fixtures are powered on and in DMX mode.
- Chase Effects Not Working:
- Re-check the programming steps for the chase effect as described in Section 5.2.
- Ensure you have exited programming mode correctly by pressing the "MANUAL" button to save the changes.
8. User Tips
- The luminous prompts on the buttons provide clear feedback on the controller's operational status, which can be helpful in low-light environments.
- Utilize the power failure memory feature to quickly resume your lighting show after an unexpected power interruption.
- The TYPE-C charging port allows for convenient charging using common mobile phone chargers, enhancing portability.
9. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase receipt as proof of purchase.
