1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the TP.MT9632T.PC771(T) LCD TV Network Motherboard. This board is designed as a replacement component for compatible LCD televisions. Please read this manual thoroughly before attempting any installation or repair to ensure proper function and safety.

2. Safety Information
- Always disconnect the TV from the power source before beginning any installation or repair work.
- Only qualified technicians should attempt to install or replace TV components.
- Handle the motherboard by its edges to avoid damaging sensitive components or introducing static discharge.
- Ensure proper grounding to prevent electrostatic discharge (ESD) damage.
- Verify compatibility of the motherboard with your TV model before installation.
3. Setup and Installation
Before installing the new motherboard, it is crucial to correctly identify the existing components within your television. Incorrect installation can lead to damage to the TV or the new motherboard.
3.1 Identifying TV Components
Refer to the diagram below to locate the key components inside your TV. It is recommended to take a picture of your TV's internal layout before disassembly for reference.

- Screen number: Typically found on a label on the back of the LCD panel.
- Power supply board: Responsible for providing power to all TV components.
- Motherboard (Main board): The central processing unit of the TV, where the network motherboard is located.
- T-con board: (Timing Controller) Processes video signals for the display panel.
- TV model: Usually found on a label on the back casing of the TV.
3.2 Installation Steps
- Preparation:
- Ensure the TV is unplugged from all power sources.
- Place the TV face down on a soft, clean surface to protect the screen.
- Remove the back cover of the TV carefully.
- Disconnection:
- Carefully disconnect all cables and connectors from the old motherboard. Take photos if necessary to remember the connections.
- Unscrew the old motherboard from the TV chassis.
- Installation of New Motherboard:
- Align the new TP.MT9632T.PC771(T) motherboard with the mounting holes in the TV chassis.
- Secure the new motherboard with the appropriate screws. Do not overtighten.
- Reconnect all cables and connectors to their corresponding ports on the new motherboard. Double-check all connections.
- Reassembly and Testing:
- Before replacing the back cover, temporarily connect the TV to power.
- Power on the TV and check for basic functionality (e.g., power indicator, display, sound).
- If the TV functions correctly, disconnect power, replace the back cover, and secure it.
- Perform a full test of all TV functions (inputs, network, settings) after full reassembly.
4. Operating Instructions
Once the TP.MT9632T.PC771(T) motherboard is successfully installed, the television should operate as intended by its original manufacturer. No specific operating instructions are required for the motherboard itself, as its function is integrated into the TV's overall system. Refer to your television's original user manual for operating instructions.
Ensure all necessary drivers or firmware updates are applied if prompted by the TV's software, especially for network functionalities.
5. Maintenance
The TP.MT9632T.PC771(T) motherboard is a robust electronic component designed for long-term reliability. Minimal maintenance is required:
- Keep the TV in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures.
- Ensure adequate ventilation around the TV to prevent overheating of internal components.
- Avoid physical shocks or impacts to the television.
- Do not attempt to clean the motherboard directly with liquids. If cleaning is necessary, use a soft, dry brush or compressed air with the TV unplugged.
6. Troubleshooting
If you encounter issues after installing the TP.MT9632T.PC771(T) motherboard, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV does not power on. | Loose power cable connection, faulty power supply board, or incorrect motherboard installation. |
|
| No picture, but sound is present. | Faulty T-con board, backlight issue, or incorrect display cable connection. |
|
| Distorted or incorrect display. | Incorrect panel settings, damaged display cable, or motherboard incompatibility. |
|
| Network features not working. | Loose network cable, Wi-Fi module issue, or software configuration. |
|
Important Note: The seller states that "These products have undergone rigorous testing by professional technicians and are in good condition." If you encounter persistent issues, it is recommended to contact the seller for support.

7. Specifications
| Feature | Detail |
|---|---|
| Model Number | TP.MT9632T.PC771(T) |
| Type | LCD TV Network Motherboard |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 25 cm |
| Package Width | 20 cm |
| Package Height | 7 cm |
| Package Weight | 0.5 kg |
8. Warranty and Support
This product is supplied by XGEDA Professional LCD Accessories Store. The seller emphasizes that all products are rigorously tested before shipping. If the product is faulty during shipping, please inform the seller immediately after receipt.
For any questions or issues, please contact the seller directly. They have stated: "If you have not understand problem, you can always send email to us, we will reply to your mail, thank you!" and "If you can't see the goods in the store, you can contact our customer service for consultation."

Please retain your purchase records for any warranty claims or support requests.
9. User Tips
- Double-Check Model Numbers: Always verify that the model number of the replacement board (TP.MT9632T.PC771(T)) precisely matches the original board or is listed as a compatible replacement for your specific TV model.
- Static Discharge Prevention: Before handling any internal TV components, touch a grounded metal object (like an unpainted metal pipe or the TV chassis itself) to discharge any static electricity from your body. Consider using an anti-static wrist strap.
- Organize Screws: During disassembly, keep track of where each screw came from. Using small containers or a magnetic mat can help prevent mixing them up, as different screws may have different lengths or thread types.
- Firmware Compatibility: After installation, if the TV powers on but exhibits unusual behavior, check if a firmware update is available for your TV model. Sometimes, a new main board might require specific firmware to function optimally with other TV components.