1. Introduction
The Staniot K300 Wireless Security Keypad is designed to provide convenient and secure control over your home alarm system. Featuring a stylish design, multi-user code support, RFID arm/disarm functionality, and an anti-dismantling alarm, this keypad enhances the security and ease of use of your Staniot alarm host.
2. Main Features
- Stylish Exterior Design
- Wireless Connection (433Mhz)
- Breathing Backlight with Light Sensor
- Multi-user Codes (1 Admin, 3 User codes)
- Built-in 1500mAh Battery with Low-power Design
- RFID Tags Supported for Quick Arm/Disarm
- Anti-dismantling Alarm
- Doorbell Button Functionality
- Automatic Wake-up via Microwave Proximity Sensor

3. Specifications
| Parameter | Value |
|---|---|
| Power Supply | DC5V 1A |
| Built-in Battery | 3.7V 1500mAh lithium battery |
| Working Current | <10mA |
| Standby Current | <100uA |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, eV1527 |
| Receiving Distance | 100 meters (open space) |
| Working Temperature | -10°C~50°C |
| Product Size | 135×100mm |


4. Package Contents
The Staniot K300 Wireless Security Keypad package typically includes:
- 1 x Staniot K300 Wireless Security Keypad
- RFID Tags (quantity may vary)
- Mounting Hardware (screws, anchors)
- USB Charging Cable
- User Manual (this document)
5. Setup
5.1 Pairing with Alarm Panel
The K300 Keypad must be paired with a compatible Staniot alarm host (e.g., Secpanel 3, Secpanel 5, Secpanel 7, Secpanel 7 Pro, SecCube 3) to function. It does not operate as an independent siren.
- On your Staniot alarm host, enter the user code to access the main menu.
- Navigate to the 'Accessory' section.
- Select 'Keypad' from the accessory options.
- The alarm host will prompt you to 'Please trigger accessories'.
- On the K300 Keypad, press any key (e.g., the checkmark button) to send a signal.
- The alarm host should display 'Pair ok' and add the keypad.
5.2 Mounting the Keypad
Choose a suitable location near your entry/exit point. Ensure the keypad is within wireless range of your alarm host. Use the provided mounting hardware to securely attach the keypad to a wall or flat surface.
6. Operating Instructions
6.1 Arming the System
To arm your security system:
- Using a Code: Enter your user code (e.g., 1234) and press the 'Arm Away' (shield icon) or 'Arm Home' (house icon) button. The system will initiate a countdown before arming.
- Using an RFID Tag: Present a registered RFID tag to the RFID reader area on the keypad. The system will arm immediately or after a short delay, depending on your system settings.

6.2 Disarming the System
To disarm your security system:
- Using a Code: Enter your user code and press the 'Disarm' (unshielded icon) button.
- Using an RFID Tag: Present a registered RFID tag to the RFID reader area on the keypad. The system will disarm.
6.3 Doorbell Function
The keypad features a dedicated doorbell button. When pressed, the alarm host will emit a chime, alerting you to visitors.

6.4 Anti-dismantling Alarm
The keypad is equipped with an anti-dismantling alarm. If the keypad is tampered with or forcibly removed from its mounting location, it will trigger an alarm on the connected alarm host, providing an additional layer of security.

6.5 Automatic Wake-up and Backlight
- Microwave Proximity Sensor: The keypad will automatically wake up and illuminate its keys when a human body approaches within approximately 1 meter.
- Light Sensor: The keypad's backlight brightness automatically adjusts based on ambient light conditions for optimal visibility.

7. Maintenance
7.1 Battery Management
The K300 Keypad is equipped with a built-in 1500mAh lithium battery designed for long-lasting performance. A low voltage alert feature will notify you when the battery needs recharging. Use the provided USB charging cable to recharge the keypad.

7.2 Cleaning
Wipe the keypad with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
8. Troubleshooting
- Keypad not responding: Ensure the battery is charged. If the issue persists, re-pair the keypad with the alarm host.
- RFID tags not working: Verify that the RFID tags are correctly registered with the alarm system. Ensure the tag is placed directly over the RFID reader area.
- Backlight not working: Check ambient light conditions. If it's bright, the backlight may be dimmed automatically. If in a dark environment, ensure the proximity sensor is not obstructed.
- Anti-dismantling alarm triggers unexpectedly: Ensure the keypad is securely mounted and not loose.
9. User Tips
- Regularly check battery status: Pay attention to the low voltage alert to ensure uninterrupted security.
- Test the anti-dismantle feature: Periodically check that the anti-dismantle alarm functions correctly by gently attempting to dislodge the keypad (without causing damage).
- Keep RFID tags secure: Treat your RFID tags like keys; keep them in a safe place to prevent unauthorized access.
- Familiarize all users with codes and RFID: Ensure all authorized users know their codes and how to use RFID tags for smooth operation.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official Staniot website or contact your retailer. Video guidelines and tutorials are also available on the Staniot YouTube homepage: https://www.youtube.com/channel/UC0omnisV9_rZOcGsSMH1hLQ