QYT KT-5800

Contents

QYT KT-5800 Dual Band Mobile Radio Instruction Manual

Model: KT-5800 | Brand: QYT

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your QYT KT-5800 Dual Band Mobile Radio. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

QYT KT-5800 Mobile Radio and included accessories in packaging
Figure 1: QYT KT-5800 Mobile Radio and its packaging with main accessories.

2. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

  • 1 × KT-5800 Mobile Radio Unit
  • 1 × Speaker Microphone
  • 1 × Cigarette Lighter Power Cable
  • 1 × Clip for Speaker Microphone
  • 1 × Mounting Bracket
  • 1 × Screw Set for Mounting
  • 1 × English User Manual (this document)

3. Features

The QYT KT-5800 Mobile Radio offers a comprehensive set of features for reliable communication:

  • VHF/UHF Dual Band Operation: Supports 136-174MHz (VHF) and 400-470MHz (UHF) frequencies.
  • 200 Memory Channels: Store your frequently used frequencies for quick access.
  • Output Power: 25W (VHF) / 20W (UHF) for effective transmission.
  • Frequency Step Options: 2.5/5/6.25/10/12.5/25KHz.
  • Wide Power Supply Compatibility: Operates on 12V from private cars and 24V from heavy trucks.
  • FM Radio Reception: Tune into FM broadcasts from 65-108MHz.
  • Scrambler Function: Enhance privacy during communications.
  • Tone Signaling: Includes 2 Tone/5Tone/DTMF, DCS/CTCSS for selective calling and repeater access.
  • Remote Kill/Remote Stun: Security features for disabling a lost or stolen radio.
  • High/Low Power Selectable: Adjust transmit power to conserve battery or extend range.
  • Transmit Time Out Timer (TOT): Prevents accidental long transmissions.
  • 0~9 Squelch Level: Adjustable squelch to filter out weak signals and noise.
  • Channel Name Edit: Customize channel names for easy identification.
  • Manual Programming: Program frequencies and settings directly from the radio.
  • PC Programming: Connect to a computer with a programming cable and software.

4. Specifications

Detailed technical specifications for the QYT KT-5800 Mobile Radio:

4.1 General Specifications

Table of General Specifications for QYT KT-5800 including frequency range, memory channels, channel spacing, frequency step, squelch way, frequency stability, operating temperature, operating voltage, dimensions, and weight.
Figure 2: General Specifications Table.
ParameterValue
Frequency RangeVHF: 136-174MHz, UHF: 400-470MHz
Memory Channels200
Channel Spacing25KHz/20KHz/12.5KHz
Frequency Step2.5/5.0/6.25/10.0/12.5/25.0KHz
Squelch WayCARRIER/CTCSS/DCS/5TONE/2TONE/DTMF
Frequency Stability±2.5ppm
Operating Temperature-20°C to +60°C
Operating Voltage13.8V/24V DC±15%
Dimensions (W*D*H)123mm * 158mm * 44mm
Weight660g

4.2 Receiver and Transmit Specifications

Table of Receiver and Transmit Specifications for QYT KT-5800, including sensitivity, selectivity, intermodulation, spurious rejection, audio response, hum & noise, audio distortion, output power, and modulation mode for both wide and narrow bands.
Figure 3: Receiver and Transmit Specifications Table.
ParameterWide BandNarrow Band
Receiver (ETSI EN 300 086 Standardized. Test)
Sensitivity≤0.25μV≤0.35μV
Adjacent Channel Selectivity≥70dB≥60dB
Intermodulation≥65dB≥60dB
Spurious Rejection≥70dB≥70dB
Audio Response+1~-3dB(0.3-3KHz)+1~-3dB(0.3-2.55KHz)
Hum & Noise≥45dB≥40dB
Audio Distortion≤5%
Audio Output Power≥2W ±10%
Transmit (ETSI EN 300 086 Standardized. Test)
Output Power25W(VHF)/20W(UHF)
Modulation Mode16KΦ F3E11KΦ F3E
Adjacent Channel Selectivity≥70dB≥60dB
Hum & Noise≥40dB≥36dB
Spurious Emission≥60dB≥60dB
Audio Response+1~-3dB(0.3-3KHz)+1~-3dB(0.3-2.55KHz)
Audio Distortion≤5%

5. Setup

Follow these steps to set up your QYT KT-5800 Mobile Radio:

  1. Mounting the Radio:
    • Choose a secure and accessible location in your vehicle, away from airbags and direct sunlight.
    • Use the provided mounting bracket and screws to firmly attach the radio unit. Ensure adequate ventilation around the unit.
  2. Connecting the Speaker Microphone:
    • Plug the speaker microphone cable into the designated port on the front panel of the radio.
    • Use the microphone clip to secure the microphone within easy reach.
  3. Connecting to Power:
    • Connect the cigarette lighter power cable to the power input port on the rear of the radio.
    • Plug the cigarette lighter adapter into your vehicle's 12V or 24V power socket. Ensure the vehicle's ignition is off before connecting.
    • Verify the power connection is secure to prevent intermittent power loss.
  4. Antenna Connection (Sold Separately):
    • Connect a suitable VHF/UHF dual-band antenna (not included) to the antenna connector on the rear of the radio.
    • Ensure the antenna is properly tuned for the operating frequencies to prevent damage to the radio's transmitter.
  5. Initial Power-On:
    • Turn on your vehicle's ignition.
    • Press the power button on the radio. The display should illuminate.
Close-up view of the QYT KT-5800 mobile radio's front panel and speaker microphone, showing buttons for Menu, Mode, Call, Moni, FM, Exit/ABCD, and a rotary knob.
Figure 4: Front Panel and Speaker Microphone for operation reference.

6. Operating Instructions

This section outlines the basic operation of your KT-5800 mobile radio.

  1. Power On/Off:
    • Press and hold the power button (usually located on the front panel or a dedicated knob) to turn the radio ON or OFF.
  2. Volume Adjustment:
    • Rotate the VOL knob (if present) or use the UP/DOWN buttons on the microphone/radio to adjust the audio output level.
  3. Channel/Frequency Selection:
    • Memory Mode: Press the 'MODE' button to switch to Memory mode. Use the UP/DOWN buttons on the radio or microphone to cycle through stored channels.
    • Frequency Mode (VFO): Press the 'MODE' button to switch to Frequency mode. Enter frequencies directly using the microphone keypad or adjust with the rotary knob.
  4. High/Low Power Selection:
    • Access the menu (usually 'MENU' button) and navigate to the power setting. Select 'HIGH' or 'LOW' as required.
  5. Squelch Level Adjustment:
    • Access the menu and find the 'SQUELCH' or 'SQL' setting. Adjust the level from 0 (open squelch) to 9 (tight squelch) to filter out background noise.
  6. Transmitting:
    • Ensure you are on a clear frequency or channel.
    • Press and hold the PTT (Push-To-Talk) button on the speaker microphone to transmit. Speak clearly into the microphone.
    • Release the PTT button to receive.
  7. FM Radio Reception:
    • Press the 'FM' button to enter FM broadcast reception mode.
    • Use the frequency adjustment methods to tune to your desired FM station.
  8. Scrambler Function:
    • Activate the scrambler feature via the radio's menu to encrypt your voice transmissions. Both transmitting and receiving radios must have the scrambler active for it to work.
  9. Tone Signaling (CTCSS/DCS/2Tone/5Tone/DTMF):
    • These functions are typically configured in the menu for each channel or frequency. Refer to the detailed programming section in the full user manual for specific setup.
  10. Channel Name Editing:
    • In Memory mode, access the menu to find the 'NAME' or 'CH NAME' option to customize the display name for stored channels.
  11. PC Programming:
    • For advanced configuration, connect the radio to a computer using a compatible programming cable.
    • Install the QYT programming software (not included, usually available from the manufacturer's website).
    • Follow the software instructions to program frequencies, tones, and other settings.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your radio:

  • Cleaning:
    • Wipe the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
    • Keep the display screen clean and free from dust.
  • Environmental Conditions:
    • Avoid exposing the radio to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
    • Ensure adequate ventilation around the unit, especially during extended operation.
  • Cable Inspection:
    • Regularly inspect all cables (power, microphone, antenna) for signs of wear, damage, or loose connections. Replace damaged cables immediately.
  • Firmware Updates:
    • Check the manufacturer's website periodically for any available firmware updates to improve performance or add features. Follow update instructions carefully.

8. Troubleshooting

If you encounter issues with your KT-5800, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Radio does not power on.No power connection; Blown fuse in power cable; Vehicle power issue.Check power cable connections; Inspect fuse in cigarette lighter plug; Verify vehicle's 12V/24V socket is functional.
No reception or poor reception.Antenna not connected or damaged; Incorrect frequency/channel; Squelch level too high; Out of range.Ensure antenna is securely connected and undamaged; Verify correct frequency/channel; Lower squelch level; Move to an area with better signal coverage.
Cannot transmit.PTT button not pressed; Incorrect frequency/channel; Transmit power set to low; Antenna issue.Press PTT firmly; Verify correct frequency/channel; Set transmit power to high; Check antenna connection.
Audio is distorted or unclear.Volume too high/low; Microphone issue; Signal interference.Adjust volume; Check microphone connection; Move away from sources of electrical interference.
Programming issues via PC.Incorrect cable/driver; Software compatibility; Radio not in programming mode.Ensure correct programming cable and drivers are installed; Use compatible software version; Follow software instructions for putting radio into programming mode.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.