DNXT CPF101

Contents

4G Wireless Router CPF101 User Manual

Model: CPF101

1. Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your CPF101 4G Wireless Router. This device is designed to provide high-speed wireless internet access by converting a 4G cellular signal into a Wi-Fi hotspot and wired network connection, suitable for various environments including offices, homes, and temporary setups. Please read this manual carefully before using the device to ensure optimal performance and safety.

2. Specifications

Feature Description
Brand DNXT
Model CPF101 (South America Version)
Category Wireless Routing
Transmission Rate 300Mbps
VPN Support Yes
Built-in Firewall Yes
Wireless Network Support Frequency 2.4GHz
Wireless Protocol 802.11n
Product Weight 0.355 kg
Product Dimensions (L x W x H) 175.71 x 167.23 x 52.21 mm
Interfaces 3 Network Ports (LAN1, LAN2, WAN), 1 DC Power Port, 1 SIM Card Slot
Frequency Bands (South America Version) FDD LTE: B2/B3/B4/B5/B7/B8/B28/B66
TDD LTE: B38/B40/B41
UMTS (WCDMA): B2/B4/B5/B8
Max Users Up to 32 terminals

Note: This is a 4G router. While some branding may mention '5G', it refers to 5GHz Wi-Fi band support, not 5G cellular network connectivity.

Router dimensions diagram

Figure 2.1: Router dimensions (85mm x 91mm x 185mm)

3. Package Contents

Ensure all items are present in the package:

  • CPF101 4G Wireless Router (Host)
  • Ethernet Cable
  • Power Adapter (American or European standard, depending on selection)
  • Instruction Manual

Video 3.1: Unboxing and product overview of the CPF101 router.

Router packaging box

Figure 3.1: The CPF101 router and its packaging.

4. Product Overview

4.1 Front Panel Indicators

Front view of CPF101 router with LED indicators

Figure 4.1: Front view of the CPF101 router.

  • LAN2, LAN1: Indicate activity on the respective LAN ports.
  • WAN: Indicates activity on the WAN port.
  • WIFI: Indicates Wi-Fi network status.
  • 4G: Indicates 4G cellular network status.
  • DATA: Indicates data transmission activity.
  • POWER: Indicates power status.

4.2 Rear Panel Ports

Rear view of CPF101 router with ports

Figure 4.2: Rear view of the CPF101 router.

  • SIM: Slot for inserting the SIM card.
  • LAN1, LAN2: Ethernet ports for connecting wired devices.
  • WAN: Ethernet port for connecting to an external modem or existing network.
  • DC: Power input port.

5. Setup Instructions

  1. Insert SIM Card:

    Locate the SIM card slot on the rear panel of the router. Gently insert your Micro SIM card (15 x 25 mm) into the slot until it clicks into place. Ensure the SIM card is correctly oriented as shown in the diagram.

    SIM card insertion diagram

    Figure 5.1: Correct SIM card insertion.

  2. Connect Power Adapter:

    Connect the provided power adapter to the DC port on the rear of the router, then plug the adapter into a power outlet.

  3. Power On:

    The router will automatically power on. Wait for the POWER, 4G, and WIFI indicators on the front panel to stabilize. The 4G indicator should turn solid to indicate a successful cellular network connection.

  4. (Optional) Connect Wired Devices:

    If you wish to connect devices via Ethernet, use the provided Ethernet cable to connect your computer or other network devices to the LAN1 or LAN2 ports.

    Diagram showing 4G to WiFi and 4G to wired connections

    Figure 5.2: Router supporting both Wi-Fi and wired connections.

6. Operating Instructions

6.1 Connecting to Wi-Fi

  1. On your Wi-Fi enabled device (smartphone, laptop, tablet), search for available Wi-Fi networks.
  2. Select the SSID (network name) of your CPF101 router. The default SSID and password are usually found on a sticker on the bottom or back of the router, or in the included quick start guide.
  3. Enter the Wi-Fi password when prompted.
  4. Once connected, you should have internet access.
Diagram of various devices connecting to the router

Figure 6.1: Multiple devices connecting to the router.

6.2 Accessing the Web Management Interface

To configure advanced settings, you can access the router's web management interface:

  1. Connect your device to the router via Wi-Fi or Ethernet.
  2. Open a web browser and enter the default IP address (e.g., 192.168.1.1 or 192.168.0.1) into the address bar. Refer to the sticker on your router or the quick start guide for the exact IP address.
  3. Enter the default username and password (commonly admin/admin or admin/password).
  4. From the web interface, you can change Wi-Fi name (SSID), password, network settings, and more.

7. User Tips

  • 5G vs. 4G: This router supports 4G cellular networks and provides Wi-Fi on the 2.4GHz band. The '5G' sometimes seen in branding refers to 5GHz Wi-Fi, not 5G cellular connectivity.
  • Regional Compatibility: The CPF101 is available in a South America version, designed to work with specific frequency bands in that region (FDD LTE: B2/B3/B4/B5/B7/B8/B28/B66, TDD LTE: B38/B40/B41, UMTS: B2/B4/B5/B8). Ensure your local carrier's bands are supported for optimal performance.
  • Signal Strength: For best performance, place the router in an open area, away from obstructions and other electronic devices that might cause interference. The built-in high-gain antenna helps ensure strong signal penetration.
  • Multiple Users: The router supports up to 32 connected devices, making it suitable for sharing internet access in small offices or homes.
Router with strong signal indication

Figure 7.1: Built-in high-gain antenna for strong signal.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the router. Do not use liquid cleaners or aerosols.
  • Placement: Place the router in a well-ventilated area to prevent overheating. Avoid placing it near heat sources or in direct sunlight.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates. Keeping your router's firmware up-to-date can improve performance, security, and add new features.
  • Restarting: If you experience connectivity issues, try restarting the router by unplugging the power adapter, waiting 10 seconds, and then plugging it back in.

9. Troubleshooting

9.1 No Internet Access

  • Check if the 4G indicator is solid. If not, ensure the SIM card is correctly inserted and activated with a data plan.
  • Verify that your SIM card has an active data plan and sufficient balance.
  • Try restarting the router.
  • Ensure the router is placed in an area with good cellular signal reception.

9.2 Weak Wi-Fi Signal or Frequent Disconnections

  • Move the router to a central location, away from walls, large metal objects, and other electronic devices that may cause interference.
  • Ensure there are no physical obstructions blocking the Wi-Fi signal.
  • Reduce the number of connected devices if too many are active simultaneously.

9.3 Cannot Access Web Management Interface

  • Ensure your device is connected to the router's network (Wi-Fi or Ethernet).
  • Verify that you are using the correct IP address for the router (check the sticker on the device).
  • Clear your browser's cache or try a different browser.
  • Temporarily disable any VPN or firewall software on your computer.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.