LAUNCH Creader 5011 V2

Contents

LAUNCH X431 Creader TPMS 5011 V2 Diagnostic Tool User Manual

Model: Creader TPMS 5011 V2

1. Introduction

The LAUNCH X431 Creader TPMS 5011 V2 is a professional tire pressure testing and diagnostic device. It is an upgraded version designed to comprehensively diagnose Tire Pressure Monitoring System (TPMS) faults, activate TPMS sensors, perform TPMS relearning, and retrieve Original Equipment (OE) part numbers for sensors. This tool also provides full OBDII diagnostic functions and supports 12 hot reset services.

The device operates on Android 8.1, features a 5-inch display (720*1280 pixels), a 6000mAh high-capacity battery, and 2+32GB of memory. It supports online diagnostics via Wi-Fi and offers lifetime free software upgrades.

2. Components and Controls

Familiarize yourself with the main components and controls of your LAUNCH X431 Creader TPMS 5011 V2 device.

LAUNCH Creader TPMS 5011 V2 device with labels for its features

Image Description: A front view of the LAUNCH Creader TPMS 5011 V2 device, highlighting its screen and various functions such as OBD II 10 Modules, 12 Resets, Program, 315/433MHz, OE Inquiry, and Free Update.

Front view of the LAUNCH Creader TPMS 5011 V2 device

Image Description: A clear front view of the LAUNCH Creader TPMS 5011 V2 diagnostic tool, showing its robust casing and display.

Device Layout

  • TPMS Antenna: Used for activating and communicating with TPMS sensors.
  • Power Button: Turns the device on/off and controls screen sleep/wake.
  • Charging Port: Connects the device to a power source or PC using the Type-C charging cable.
  • Touch Screen: Main interface for interacting with the device.
  • Setting Button: Accesses device settings.
  • Home Button: Returns to the main menu.
  • Return Button: Navigates back to the previous screen.
  • DB15 Diagnostic Connector: Connects the device to the vehicle's OBDII port via the diagnostic main cable.

3. Setup

3.1. Powering Up the Device

The tool can receive power in two ways:

  1. Via Data Cable: Connect one end of the included Type-C charging cable to the device's charging port and the other end to a PC or power adapter.
  2. Via Diagnostic Cable: Connect the diagnostic main cable to the device's DB15 diagnostic connector and the other end to the vehicle's Data Link Connector (DLC) port.

Note: The DLC is typically located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. Refer to your vehicle's manual for the exact location.

Image showing the LAUNCH Creader TPMS 5011 V2 device, diagnostic cable, and charging cable in its packaging.

Image Description: The LAUNCH Creader TPMS 5011 V2 device, diagnostic main cable, and Type-C charging cable are shown within their clear plastic packaging, alongside the quick start guide.

3.2. Initial Setup Steps

When using the device for the first time, you will need to perform some system settings and ensure the diagnostic software is updated to the latest version. Follow these steps:

  1. Tap
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.