1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Bonroad Wireless Carplay Android Auto Decoder Box. This device is designed to integrate Apple CarPlay and Android Auto functionalities into your existing Toyota Touch 2 or Entune 2.0 system, enhancing your in-car entertainment and navigation experience without replacing your original car screen.
Please note that this product is a carplay interface decoder box, not a car screen. It works by adding new functionalities to your existing display.
2. Compatibility
The Bonroad Wireless Carplay Android Auto Decoder Box is compatible with specific Toyota models equipped with the Touch 2 & Entune 2.0 system. It is crucial to verify your car's system before installation.
2.1 System Requirements
- Compatible with Toyota Touch 2 & Entune 2.0 systems.
- Not compatible with vehicles equipped with a 360 camera/bird's eye view system.
- The original car system must be Panasonic, Fujitsu, or Pioneer.
- For manual gear cars, the decoder box does not support original rear camera and aftermarket camera.
2.2 Compatible Car Models (2014-2019 unless specified)
- Toyota Corolla (not compatible with 86140-02540 Fujitsu with 7" display)
- Toyota Tacoma
- Toyota Avensis
- Toyota Tundra
- Toyota Auris
- Toyota Yaris (2014-2018)
- Toyota Camry (2014-2017)
- Toyota 86 (2017-2019)
- Toyota Avalon (2015-2018)
- Toyota C-HR (2018)
- Toyota Prius c (2016-2019)
- Toyota Verso
- Toyota Prius v (2016-2017)
- Toyota Verso s
- Toyota Sequoia
- Toyota Alphard (2015-2017)
- Toyota Sienna (2015-2017)
- Toyota Land Cruiser
- Toyota 4Runner (Only fits for Panasonic & Fujitsu, not support Pioneer)
- Toyota Land Cruiser Prado
- Toyota Highlander
- Toyota Prius (2016-2019, not compatible with 11.6" screen equipped models)
- Toyota RAV4 (2014-2018, not compatible with 86100-42241)


3. Product Features
The Bonroad Wireless Carplay Android Auto Decoder Box offers a range of features to enhance your driving experience:
- Wireless Apple CarPlay & Android Auto: Seamlessly integrate your smartphone for navigation, music, and communication.
- Airplay & Autolink: Mirror your phone's screen directly onto the car display.
- Bluetooth Connectivity: For hands-free calling and online music streaming.
- USB Support: Connect USB devices for media playback.
- Navigation Maps: Supports popular navigation apps like Google Maps, Waze Map, and Apple Map.
- Hands-Free Calling: Make and receive calls directly from your car's screen.
- Online Music: Stream music from your phone via Bluetooth.
- Original Car Control Integration: Utilize existing car buttons and touch screen for control.
- Rear Camera Support: Compatible with factory reverse cameras, parking radar, aftermarket cameras, and 360 cameras (check compatibility notes for manual gear cars).
- Dual System Interchange: Easily switch between the original car system and the CarPlay/Android Auto interface.
- Siri Control: Voice command functionality for Apple CarPlay.










4. Package Contents
Upon opening the package, please ensure all the following items are present:
- 1x Bonroad Wireless Carplay Android Auto Decoder Box (Unit)
- 1x User Manual
- 1x Power Cable
- 1x USB Cable
- 1x WIFI Antenna

5. Setup and Installation
Installation of the Bonroad Wireless Carplay Android Auto Decoder Box requires careful handling of your car's original radio system. If you lack relevant installation experience, it is highly recommended to seek assistance from a professional installer. If you plan to install it yourself, please contact us for specific settings and support before proceeding.
5.1 Installation Steps
- Remove Original Car Radio: Carefully remove the trim panels and screws securing the original car radio. Use appropriate pry tools to avoid damage. Disconnect all cables from the back of the radio.
- Connect the CarPlay Module with Original Car Radio: Connect the provided power cable and USB cable to the corresponding ports on the original car radio. Ensure the 10-pin, 24-pin, and 28-pin plugs are correctly connected.
- Connect WIFI Antenna, Power Cable, and USB Cable with the Module: Attach the WIFI antenna to the designated port on the decoder box. Connect the other ends of the power cable and USB cable to the decoder box.
- Test Functionality: Before reassembling, power on your car and test the wireless Apple CarPlay and Android Auto functionalities to ensure proper connection and operation.
- Reassemble: Once confirmed working, carefully reassemble the car radio and trim panels.
6. Operating Instructions
Once installed, the decoder box allows you to access various smart features directly on your car's display.
6.1 Activating CarPlay/Android Auto
After installation, the system should automatically detect your connected smartphone (via Bluetooth for initial setup, then Wi-Fi for wireless projection). You can then select the CarPlay or Android Auto option from your car's display to launch the interface.
6.2 Dual System Interchange
You can freely switch between your car's original infotainment system and the CarPlay/Android Auto interface using the car's existing controls or a dedicated button if available. This allows you to retain all original car functionalities.
6.3 Using Features
- Navigation: Select your preferred navigation app (Google Maps, Waze, Apple Maps) and input your destination.
- Music & Media: Access your music library, streaming services, or USB media. Control playback using the car's controls.
- Hands-Free Communication: Make and receive calls, send messages using voice commands or the touch screen.
- Voice Assistant: Utilize Siri (for Apple CarPlay) for various commands and queries.
7. Maintenance
To ensure the longevity and optimal performance of your decoder box, follow these maintenance guidelines:
- Keep the device and connections dry. Avoid exposure to moisture or liquids.
- Clean the unit gently with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the unit to prevent overheating.
- Avoid exposing the unit to extreme temperatures, direct sunlight, or excessive vibrations.
- Regularly check cable connections to ensure they are secure.
8. Troubleshooting
If you encounter issues with your Bonroad Wireless Carplay Android Auto Decoder Box, please refer to the following common problems and solutions:
8.1 Common Issues
- No CarPlay/Android Auto Display:
- Ensure all cables are securely connected to both the original car radio and the decoder box.
- Verify that your car's system is indeed Touch 2 or Entune 2.0 and meets all compatibility requirements.
- Check if your phone's Bluetooth and Wi-Fi are enabled and correctly paired with the system. - Audio Problems:
- Confirm that the audio output settings on your car's system and your phone are correctly configured.
- Check all audio cable connections. - Unresponsive Controls:
- Ensure the decoder box is receiving power.
- Restart your car and phone to reset connections.
- Verify that your car model is fully compatible, especially regarding specific radio unit part numbers (e.g., Corolla 86140-02540, RAV4 86100-42241, Prius 11.6" screen models are not compatible). - Rear Camera Not Working (Manual Gear Cars):
- As noted in compatibility, manual gear cars do not support original or aftermarket rear cameras with this decoder box. - 4Runner Compatibility:
- For Toyota 4Runner, the system only fits Panasonic & Fujitsu units; Pioneer units are not supported.
If the problem persists after attempting these solutions, please contact customer support for further assistance.
9. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions (L x W x H) | 128mm x 84mm x 25mm |
| Main Function | Wireless Apple CarPlay & Android Auto |
| Supported Phone OS | iOS & Android |
| Package Weight | 0.69 kg |
| Package Dimensions (L x W x H) | 19cm x 11cm x 10cm |
10. User Tips
To ensure a smooth experience with your Bonroad Wireless Carplay Android Auto Decoder Box, consider the following tips:
- Professional Installation: If you are not confident with car electronics installation, it is highly recommended to have the device installed by a qualified professional. This can prevent potential damage to your vehicle or the product.
- Pre-Installation Check: Always confirm your car's exact model, year, and infotainment system version (Touch 2 or Entune 2.0) before purchasing and installing. Pay close attention to specific exclusions mentioned in the compatibility section.
- Contact Support: If you plan a DIY installation, contact the seller beforehand to understand any specific settings or configurations required for your vehicle model.
- System Verification: Before fully reassembling your dashboard, perform a thorough test of all new functionalities (CarPlay, Android Auto, camera, audio) to ensure everything is working as expected.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue for prompt assistance.