Erilles Smartphone Projector 2.0

Contents

DIY Smart Phone Projector 2.0 User Manual

Model: Smartphone Projector 2.0 | Brand: Erilles

1. Introduction

Welcome to the user manual for your new Erilles DIY Smart Phone Projector 2.0. This innovative device allows you to project movies and videos from your smartphone onto a wall, transforming any room into a personal home theater. Designed for easy DIY assembly, this projector offers an impressive 8x magnification for an enhanced viewing experience. Please read this manual carefully before assembly and operation to ensure proper use and longevity of your product.

Erilles Smartphone Projector 2.0 in a lifestyle setting, next to a glass and newspaper.
The Smartphone Projector 2.0 offers a unique home entertainment experience.

2. Safety Warnings and Precautions

Please read and adhere to all safety warnings and precautions to prevent injury or damage to the product.

  • Product Integrity: Before each use, ensure the product is intact and free from any damage. Do not use if any parts are broken or missing.
  • Assembly Instructions: Always follow the assembly instructions included in the packaging precisely. Incorrect assembly may lead to malfunction.
  • Ingestion Hazard: Do not ingest any parts of the product, nor allow it to come into contact with food. Keep out of reach of small children and pets.
  • Overload: Avoid prolonged operation under excessive load. This product is designed for casual home entertainment.
  • Temperature: Keep the projector away from high-temperature environments, direct sunlight, and heat sources to prevent damage to materials and components.

3. Package Contents

Upon opening your package, please verify that all components are present and in good condition. The standard package includes:

  • 1 x DIY Smart Phone Projector 2.0 Kit (unassembled components)
  • 1 x High-quality glass lens with 8x magnification
  • Assembly instructions (typically printed on the packaging or included as a separate sheet)
Product packaging for the Smartphone Projector 2.0, showing a phone slot and 'Cinema in a box!' text.
The product packaging highlights key features and phone placement.

4. Assembly and Setup

The Smart Phone Projector 2.0 is designed for DIY installation. Follow these general steps for assembly. Refer to the specific instructions printed on your product packaging (e.g., 'PART A', 'PART B') for detailed visual guidance.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface.
  2. Assemble the Main Body: Follow the numbered or lettered sections on the packaging (e.g., 'PART A', 'PART B') to fold and secure the cardboard body of the projector. Ensure all tabs are correctly inserted into their slots for a stable structure.
  3. Install the Lens: Insert the high-quality glass lens into the designated opening at the front of the projector body. Ensure it is securely fitted and facing the correct direction (curved side typically facing outwards).
  4. Prepare Phone Slot: Identify the slot designed for your smartphone. This area is where your phone will be placed for projection.
  5. Final Checks: Once assembled, gently test the stability of the projector. Ensure no parts are loose or incorrectly fitted.
A person assembling the Smartphone Projector 2.0, taking the main projector unit out of its box, with 'PART A' and 'PART B' visible on the box's internal flaps.
The projector is designed for DIY assembly, with instructions often found on the packaging.
Top-down view of the fully assembled Smartphone Projector 2.0, showing its compact design.
The assembled projector, ready for use.

5. Operating Instructions

Using your Smart Phone Projector 2.0 is straightforward:

  1. Prepare Your Phone: Ensure your smartphone's screen is clean. For best results, set your phone's brightness to maximum and disable screen rotation.
  2. Insert Smartphone: Carefully slide your smartphone into the designated slot at the back of the projector. The screen should face the lens. The projector is suitable for mobile phones up to a maximum size of 8 cm x 14.5 cm (approximately 3.2 x 5.7 inches).
  3. Darken the Room: For optimal projection quality, use the projector in a completely dark room.
  4. Position the Projector: Place the projector on a stable surface, facing a plain, light-colored wall or screen.
  5. Adjust Focus: The projector uses a fixed lens with 8x magnification. To adjust the focus, you may need to slightly move the projector closer to or further from the projection surface until the image is clear.
  6. Enjoy: Play your desired video or movie on your smartphone and enjoy the magnified projection!
A hand inserting a smartphone into the back slot of the Smartphone Projector 2.0.
Insert your smartphone into the designated slot with the screen facing the lens.

6. Maintenance

To ensure the longevity and optimal performance of your projector, follow these simple maintenance guidelines:

  • Cleaning the Lens: Use a soft, lint-free cloth specifically designed for optics to gently wipe the lens. Avoid abrasive materials or harsh chemicals that could scratch or damage the lens.
  • Cleaning the Body: The projector body can be wiped with a dry or slightly damp cloth. Do not use excessive moisture.
  • Storage: When not in use, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent dust accumulation and accidental damage.
  • Avoid Liquids: Do not expose the projector to water or other liquids.

7. Troubleshooting

If you encounter any issues with your projector, try the following solutions:

ProblemPossible Solution
Image is blurryAdjust the distance between the projector and the projection surface. Ensure your phone screen is clean.
Image is too dimEnsure the room is completely dark. Maximize your phone's screen brightness.
Image is upside down/reversedThis projector uses a simple lens system which naturally inverts the image. You will need to adjust your phone's display settings to 'mirror' or 'flip' the screen horizontally and/or vertically, if your phone supports this feature, or use an app that can do so.
Phone does not fitVerify your phone's dimensions against the maximum supported size (8 cm x 14.5 cm).

8. Specifications

FeatureDetail
Product TypeDIY Smart Phone Projector
ModelSmartphone Projector 2.0
BrandErilles
Main MaterialWood
ColorWood color
Dimensions (approx.)21 x 11 x 18 cm
Lens Magnification8x
Compatible Phone SizeMax. 8 cm x 14.5 cm (approx. 3.2 x 5.7 inches)
OriginMainland China
CertificationNONE

9. User Tips

  • For the best viewing experience, ensure your projection surface is smooth and uniformly colored. A white or light-grey wall works best.
  • Experiment with different distances to find the optimal image size and clarity for your space.
  • Consider using external speakers for audio, as your phone's speaker might be muffled inside the projector.
  • Some users find that placing a small, dark cloth around the phone inside the projector can help block ambient light and improve contrast.

10. Warranty and Support

If you encounter any quality-related issues with the product, please contact customer service first for assistance. For detailed information regarding warranty, returns, or technical support, please refer to the seller's policies or contact the seller directly.

An official user manual in PDF format may be available for download. Please check the product page or contact customer support for the link: User Manual (PDF)

© 2024 Erilles. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.