WOLTU 2PCS/Set Swivel Dining Chairs Instruction Manual

1. Introduction

Thank you for choosing the WOLTU 2PCS/Set Swivel Dining Chairs. These chairs are designed to provide comfort and style to your home, featuring soft velvet upholstery, sturdy metal legs, and a convenient 360-degree swivel function. This manual provides essential information for safe assembly, operation, and maintenance to ensure long-lasting enjoyment of your new chairs.

2. Safety Information

• Maximum Load Capacity: Do not exceed the maximum load-bearing capacity of 150 kg (330 lbs) per chair. Overloading can cause damage or injury.
• Assembly: Ensure all parts are correctly assembled and tightened before use. Periodically check and re-tighten all screws to maintain stability.
• Stability: Do not stand on the chairs. Use them only for sitting. Avoid leaning excessively to one side, which could cause the chair to tip.
• Children: Keep small parts away from children during assembly. Ensure children are supervised when using the chairs.
• Floor Protection: The chair legs are equipped with non-slip feet. Ensure these are intact and properly adjusted to protect your floor and prevent slipping.
• Placement: Place chairs on a flat, stable surface.

3. Package Contents

Your package should contain the following items:

• 2x Dining Chairs
• 2x Accessory Packs (hardware for assembly)
• 1x Instruction Manual

4. Specifications

Figure 1: Chair Dimensions (L x W x H: 60.5 x 59.5 x 78 cm, Seat Height: 48 cm)

5. Setup and Assembly

The WOLTU dining chairs require simple assembly. All necessary accessories and detailed, illustrated instructions are included in the package to guide you through the process quickly.

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify that all components listed in the accessory pack are present.
2. Attach Legs to Seat: Identify the metal legs and the seat base. The legs are designed to cross under the seat for stability. Securely attach the legs to the rotating metal plate located beneath the seat using the provided screws and tools. Ensure all connections are firm.
3. Adjust Non-slip Feet: The legs are equipped with non-slip feet. Two of these feet are adjustable. After assembly, place the chair on a flat surface and adjust the feet as needed to ensure the chair is level and stable, preventing wobbling.
4. Final Check: Double-check all screws and connections to ensure they are tight and secure before using the chair.

Figure 2: Key structural components including strong metal legs, smooth metal turntable, and adjustable anti-slip feet.

Figure 3: Overview of chair features and construction.

6. Operating Instructions

360° Swivel Function:

The dining chair features a 360° rotating plate located under the seat. This allows you to easily rotate the chair in any direction without moving the entire base. Simply apply gentle pressure to the seat and turn to your desired orientation. This feature enhances convenience, allowing you to access items around you or engage in conversations effortlessly.

Figure 4: Demonstrating the 360° swivel capability.

Ergonomic Design:

The chair is designed with an ergonomic backrest that supports your back and lumbar spine, providing a comfortable sitting experience even during prolonged use. The wide seat is padded with high-density foam and covered with soft velvet for added comfort.

Figure 5: Ergonomic design for comfortable back support.

7. Maintenance

Upholstery Care (Velvet):

• Regular Cleaning: Gently vacuum the velvet upholstery regularly using a soft brush attachment to remove dust and loose debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain and damage the velvet pile. For stubborn stains, use a mild upholstery cleaner specifically designed for velvet, testing it on an inconspicuous area first.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the velvet fabric to fade.

Metal Frame and Legs:

• Cleaning: Wipe the metal legs and frame with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
• Rust Prevention: Keep the metal parts dry to prevent rust. If exposed to moisture, wipe dry immediately.

General Maintenance:

• Check Connections: Periodically check all screws and bolts and re-tighten them as necessary to ensure the chair remains stable and safe.
• Non-slip Feet: Inspect the non-slip feet for wear and tear. Replace if damaged to protect your floors and maintain stability.

8. Troubleshooting

Chair Wobbles:

• Check Assembly: Ensure all screws connecting the legs to the seat base are fully tightened.
• Adjust Feet: Utilize the adjustable non-slip feet on the chair legs to level the chair on uneven surfaces.

Figure 6: Adjustable non-slip feet for stability.

Swivel Function is Stiff or Not Smooth:

• Check for Obstructions: Ensure there are no foreign objects obstructing the rotating mechanism under the seat.
• Verify Assembly: Confirm that the rotating metal plate was installed correctly and is not overtightened or misaligned.

9. User Tips

• Maximize Swivel: Take full advantage of the 360° swivel feature in multi-functional spaces like open-plan living areas or offices to easily transition between tasks or conversations.
• Regular Stability Checks: Make it a habit to periodically check and tighten all screws, especially if the chairs are used frequently, to maintain optimal stability and safety.
• Protect Upholstery: For velvet, consider using fabric protectors to guard against spills and stains, making cleaning easier in the long run.

10. Warranty and Support

For any questions, concerns, or issues regarding your WOLTU Swivel Dining Chairs, please contact the seller or customer support. Please have your purchase details readily available when contacting support.