ORVIBO MixPad Mini Smart Home Gateway Panel User Manual

1. Introduction

The ORVIBO MixPad Mini is an advanced all-in-one smart home gateway panel designed to centralize control of your smart devices. It integrates WiFi and Zigbee connectivity, allowing seamless communication with a wide range of smart home products. With its intuitive touch screen, mobile application, and voice control capabilities, the MixPad Mini simplifies your smart home experience. It supports various functions including lighting control, curtain management, and air conditioning adjustments, making your home smarter and more convenient.

2. Safety Information

• Read all instructions carefully before installation and use.
• Installation should only be performed by a qualified electrician to prevent electric shock or damage to the device.
• Ensure the power supply is disconnected before performing any installation or maintenance.
• Do not expose the device to water, moisture, or extreme temperatures.
• Use only specified power supply (AC110V-230V).
• Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

• ORVIBO MixPad Mini Smart Home Gateway Panel
• Installation accessories (screws, mounting bracket, etc.)
• Quick Start Guide (if applicable)

4. Installation

The MixPad Mini is designed for simple and easy installation, adopting the Chinese national standard single 86 mm size switch bottom box design. It supports a two-way lighting system and can directly replace traditional wall switches. Installation should be performed by a qualified electrician.

4.1 Wiring Diagram

Ensure the power is off before proceeding with any wiring. The device requires an AC110V-230V power supply. The built-in switch supports 2 gangs, 200W/gang.

4.2 Installation Steps

1. Disconnect Power: Turn off the main power supply to the area where the MixPad Mini will be installed.
2. Remove Old Switch: Carefully remove the existing wall switch or blank panel from the 86mm bottom box.
3. Wire the MixPad Mini: Connect the electrical wires to the corresponding terminals on the MixPad Mini. Refer to the wiring diagram provided with your specific product for detailed connections.
4. Mount the Device: Insert the MixPad Mini into the 86mm bottom box and secure it with the provided screws.
5. Attach Faceplate: Secure the decorative faceplate onto the mounted device.
6. Restore Power: Turn the main power supply back on. The MixPad Mini should power up.

5. Operating Instructions

The ORVIBO MixPad Mini offers multiple ways to control your smart home devices:

5.1 Touch Screen Control

The 4-inch touch screen provides an intuitive interface for managing your smart devices. Swipe through different screens to access controls for lighting, curtains, air conditioning, and more. Tap on icons to toggle devices, adjust settings, or activate scenes.

5.2 Mobile App Remote Control

Download the official ORVIBO smart home application on your smartphone. Follow the in-app instructions to pair your MixPad Mini. Once connected, you can remotely control all integrated devices, create automation routines, and manage scenes from anywhere.

5.3 Voice Control

The MixPad Mini supports voice commands for hands-free operation. Ensure the device is connected to your home network and configured with a compatible voice assistant (if applicable). Use predefined commands to control lights, adjust temperature, or activate scenes.

5.4 AI Scene Control

Create custom scenes to automate multiple actions with a single command or tap. For example, a 'Good Morning' scene could open curtains, turn on specific lights, and adjust the thermostat. The AI capabilities can learn your routines and suggest optimal scene settings.

6. Maintenance

To ensure optimal performance and longevity of your MixPad Mini:

• Cleaning: Use a soft, dry, lint-free cloth to clean the screen and body. Do not use abrasive cleaners, solvents, or aerosol sprays.
• Software Updates: Regularly check for and install firmware updates through the mobile application to ensure you have the latest features and security enhancements.
• Environment: Avoid installing the device in areas with high humidity, direct sunlight, or extreme temperature fluctuations.

7. Troubleshooting

If you encounter issues with your MixPad Mini, refer to the following common problems and solutions:

• Device not powering on:
  • Check if the main power supply is on.
  • Verify that the wiring connections are secure and correct.
• No Wi-Fi/Zigbee connectivity:
  • Ensure your home Wi-Fi network is active and the signal is strong.
  • Restart your Wi-Fi router.
  • Check the device settings on the MixPad Mini or in the mobile app to ensure Wi-Fi/Zigbee is enabled and correctly configured.
  • For Zigbee devices, ensure they are within range of the MixPad Mini's built-in gateway.
• Touch screen unresponsive:
  • Gently clean the screen with a soft cloth.
  • Restart the device by cycling its power (turn off power at the breaker, wait 10 seconds, then turn back on).
• Devices not responding to commands:
  • Ensure the smart devices are properly paired with the MixPad Mini.
  • Check the network status of both the MixPad Mini and the unresponsive devices.
  • Verify that the commands or scenes are correctly configured in the app.

8. Specifications

9. User Tips

• Regular Updates: Keep your MixPad Mini's firmware and the mobile application updated to benefit from the latest features, improvements, and security patches.
• Optimize Placement: For best Zigbee and Wi-Fi performance, ensure the MixPad Mini is centrally located within your smart home network and not obstructed by large metal objects.
• Explore Automation: Take advantage of the scene control and automation features in the app to create personalized routines that enhance your daily life.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the official ORVIBO customer support. Keep your purchase receipt as proof of purchase for warranty claims.