EARUELETRIC EAM1-125PV/EAM1-250PV

Contents

EARU DC Solar Molded Case Circuit Breaker (MCCB) Instruction Manual

Models: EAM1-125PV, EAM1-250PV

1. Product Overview

The EARU DC Molded Case Circuit Breaker (MCCB) is designed for use in DC electricity power lines, including photovoltaic (PV) solar systems, wind power generation systems, hydropower systems, automotive applications, and other DC power supply devices. It provides essential overload and short-circuit protection for low-voltage DC generation, transmission, and distribution systems.

These circuit breakers are suitable for a wide range of applications, ensuring safety and reliability in various DC electrical installations.

Video: Overview of EARU DC MCCB models, showcasing different sizes and features.

2. Specifications

ParameterValue
Pole Configuration1P (1-Pole), 2P (2-Pole)
Rated Voltage1P: DC300V, 2P: DC600V
Rated Current (A)100A, 125A, 160A, 200A, 250A
Frequency50Hz/60Hz
Breaking Capacity (Icu)50kA
Mechanical Life≥80000 Cycles
Electric Life≥20000 Cycles
Tripping CurveC
Protection FeaturesOver-Load Protection, Short-Circuit Protection
StandardIEC/EN 60947-2
CertificationCE
MaterialFlame Retardant Nylon
ContactsHigh-Conductivity Silver

Dimensions

Parametric diagram for 100A/125A DC MCCB models, showing dimensions and technical data.

Image: Dimensions for 100A/125A models. 1P: 38mm/1.5in width; 2P: 65mm/2.65in width. Both are 151mm/5.94in height and 88mm/3.46in depth.

Parametric diagram for 160A/200A/250A DC MCCB models, showing dimensions and technical data.

Image: Dimensions for 160A/200A/250A models. 1P: 43mm/1.69in width; 2P: 75mm/2.95in width. Both are 165mm/6.5in height and 102mm/4.02in depth.

3. Installation and Wiring

Proper installation is crucial for the safe and effective operation of the DC MCCB. It is recommended that installation be performed by a qualified electrician.

Installation Steps:

  1. Mounting: Securely mount the MCCB in an appropriate enclosure or panel, ensuring adequate ventilation and clearance around the device.
  2. Wiring: Connect the DC power lines to the designated terminals. The MCCB features double insulation for enhanced safety and ease of installation.
  3. Terminal Connections: Ensure all connections are tight and secure. The terminals are designed for high-conductivity and reliable current transfer.
Wiring diagram for a 2P DC MCCB connecting solar panels to a battery inverter charging system.

Image: Example wiring diagram showing a 2P DC MCCB used as an isolating switch between solar panels and a battery inverter charging system. Note the positive (+) and negative (-) connections.

Important Considerations:

  • Always ensure the power source is disconnected before beginning any installation or wiring work.
  • Use appropriate cable sizes and terminal lugs that match the rated current of the MCCB and the terminal dimensions.
  • Observe polarity for DC connections (positive to positive, negative to negative).

4. Operation

The DC MCCB is designed for simple and reliable operation.

Switching On/Off:

  • To turn the power ON, push the large red switching handle upwards to the 'ON' position.
  • To turn the power OFF, push the large red switching handle downwards to the 'OFF' position.

Protection Function:

The MCCB provides quick disconnect functionality for over-load and short-circuit protection. When an excessive current or short circuit occurs, the circuit breaker will automatically trip and disconnect the circuit within approximately 0.1 seconds to prevent damage to the system.

Diagram illustrating the quick disconnect feature of the MCCB during excessive current or short circuit.

Image: The 'Quick Disconnect' feature ensures immediate tripping (within 0.1 seconds) upon detection of excessive current or a short circuit, protecting the electrical system.

5. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your DC MCCB.

  • Visual Inspection: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
  • Cleaning: Keep the MCCB clean and free from dust and debris. Use a dry, non-abrasive cloth for cleaning.
  • Terminal Check: Ensure that all terminal screws remain tight. Loose connections can lead to overheating and potential hazards.
  • Functional Test: If possible and safe to do so, periodically test the trip mechanism by simulating an overload condition (only if proper testing equipment and procedures are available).

Always disconnect power before performing any maintenance or inspection.

6. Troubleshooting

If the DC MCCB trips, it indicates a fault condition in the circuit it protects.

  • MCCB Trips: If the circuit breaker trips (handle moves to the 'OFF' position or an intermediate trip position), it means an over-load or short-circuit has occurred.
  • Identify the Cause: Before resetting, investigate and resolve the cause of the trip. This could be a faulty appliance, overloaded circuit, or a short circuit in the wiring.
  • Resetting the MCCB: Once the fault is cleared, firmly push the handle completely to the 'OFF' position first, then push it upwards to the 'ON' position to reset the breaker. If the breaker immediately trips again, do not force it; re-investigate the circuit for persistent faults.

7. User Tips

  • Cable Selection: When connecting cables, ensure the cable thickness and the width of the cable end (lug) are compatible with the MCCB's terminals. The terminals are designed to accommodate standard electrical lugs for the specified current ratings. Refer to the parametric diagrams for terminal screw sizes and overall dimensions to select appropriate cable lugs.
  • Environmental Conditions: While the MCCB is robust, ensure it is installed in an environment that meets its operating temperature specifications (Cat. A, +40°C as seen on the label) and is protected from excessive moisture or corrosive elements.

8. Warranty and Support

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For technical support or inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.