1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your YANZEO Wireless 2.4G Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance.
2. Product Overview
The YANZEO Wireless 2.4G Barcode Scanner is a portable, handheld device designed for efficient and accurate scanning of both 1D and 2D barcodes. Its durable ABS+PC construction makes it suitable for various environments such as retail stores, warehouses, and libraries. Featuring a plug-and-play setup, it offers seamless integration with Windows operating systems.
Figure 1: Front and side view of the YANZEO Wireless 2.4G Barcode Scanner.
Figure 2: Rear and bottom view of the scanner, highlighting the trigger and ergonomic handle.
Figure 3: Common applications for the barcode scanner.
3. Setup Instructions
The YANZEO Wireless 2.4G Barcode Scanner is designed for a simple plug-and-play setup. Follow these steps to get your scanner ready for use:
- Charge the Scanner: Before initial use, ensure the scanner is fully charged. Connect the scanner to a USB power source using the provided charging cable. The indicator light will show charging status.
- Connect the 2.4G USB Receiver: Locate the 2.4G USB receiver (dongle) that comes with your scanner. Plug this receiver into an available USB port on your computer.
- Power On the Scanner: Press and hold the power button on the scanner until it turns on. The scanner will automatically attempt to pair with the USB receiver. A successful connection is usually indicated by a specific sound or light pattern on the scanner.
- Test the Connection: Open a text editor (like Notepad) or any application where you want to input scanned data. Scan a test barcode. If the data appears in the application, the setup is complete.
The scanner supports Windows XP, 7, 8, and 10 systems, requiring no additional driver installation.
4. Operating Instructions
Using your YANZEO Wireless 2.4G Barcode Scanner is straightforward:
- Aiming: Point the scanner's laser or light beam directly at the barcode you wish to scan. Ensure the entire barcode is within the scanning area.
- Scanning: Press the trigger button located on the handle of the scanner. The scanner will emit a beam and attempt to read the barcode.
- Confirmation: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as if typed via a keyboard.
- Supported Barcodes: The scanner is capable of reading a wide range of 1D and 2D barcodes, including:
4.1. 1D Barcodes
- UPC-A, UPC-E, EAN-8, EAN-13
- Code 39, Code 93, Code 32, Code39 (ASCII)
- Industrial 2 of 5, Interleave 2 of 5, Matrix 2 of 5
- NW7, Code 128, UCC/EAN128, USD-8
- MSI/Plessey, UK/Plessey, GS1 DataBar, Postal Code
4.2. 2D Barcodes
- DataMatrix (ECC200)
- QR Code
- PDF417
5. Maintenance
To ensure the longevity and optimal performance of your barcode scanner, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe the scanner's exterior with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the ABS+PC material.
- Lens Care: Keep the scanning window clean and free of dust or smudges. Use a soft, lint-free cloth, possibly dampened with a lens cleaning solution, to gently clean the scanning lens.
- Storage: When not in use, store the scanner in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: While the scanner is made of durable ABS+PC material, avoid dropping it or subjecting it to severe impacts to prevent internal damage.
6. Troubleshooting
If you encounter issues with your YANZEO Wireless 2.4G Barcode Scanner, please refer to the following common troubleshooting steps:
- Scanner Not Connecting:
- Ensure the USB receiver is securely plugged into your computer.
- Verify the scanner is powered on and fully charged.
- Try plugging the USB receiver into a different USB port on your computer.
- Restart your computer and try connecting again.
- No Data Output After Scanning:
- Confirm the scanner is successfully connected to the receiver (check indicator lights/sounds).
- Make sure the cursor is active in the input field of the application you are using.
- Ensure the barcode is clean, undamaged, and properly illuminated.
- Check if the barcode symbology is supported by the scanner (refer to Section 4.1 and 4.2).
- Slow or Inconsistent Scanning:
- Ensure there are no obstructions between the scanner and the USB receiver.
- Check for potential interference from other 2.4G wireless devices.
- Clean the scanning window as described in the Maintenance section.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Yanzeo |
| Type | Barcode Scanner |
| Interface Type | USB (via 2.4G Wireless Receiver) |
| Scan Element Type | CMOS |
| Scan Speed | 100 scans/second |
| Optical Resolution | 300*300 |
| Signal Connection Type | 2.4G Wireless |
| Scan Breadth | A3 (as per product data) |
| Supported Operating Systems | Windows XP / 7 / 8 / 10 |
| Material | ABS+PC |
| Package Length | 25 cm |
| Package Width | 16 cm |
| Package Height | 10 cm |
| Package Weight | 1.0 kg |
8. User Tips
No specific user tips were available from reviews or Q&A for this product. For general best practices:
- Ensure good lighting conditions when scanning to improve readability of barcodes.
- Hold the scanner steady and at an appropriate distance from the barcode for optimal scanning performance.
- Keep the scanner's battery charged to avoid interruptions during use.
9. Warranty and Support
For warranty information, technical support, or service inquiries regarding your YANZEO Wireless 2.4G Barcode Scanner, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty claims.
