Introduction
The AIFEN 3006 is a high-precision DC power supply designed for laboratory and benchtop use. It offers a stable output of 30V and 6A, with encoder regulation for precise adjustments. Featuring ultra-low ripple and multiple protection modes, it ensures safe and reliable operation for various electronic testing and development applications.
Safety Information
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Always connect the power supply to a properly grounded outlet.
- Do not operate the device in wet or damp conditions.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Do not open the casing of the power supply. There are no user-serviceable parts inside.
- Disconnect power before making or changing connections to the output terminals.
- Verify the correct voltage and current settings before applying power to a circuit.
- Use appropriate fuses as specified.
Package Contents
The package typically includes:
- AIFEN 3006 DC Power Supply Unit
- Power Cord (specific to region: AU, UK, US, or EU)
- User Manual (this document)
Product Overview
Front Panel Layout

The front panel provides all necessary controls and displays for operating the AIFEN 3006 DC Power Supply:
- Voltage Display (V): Shows the output voltage.
- Current Display (A): Shows the output current.
- Power Display (W): Shows the output power.
- CONT.OCP / C.V/C.C Indicators: Lights indicating Continuous Overcurrent Protection or Constant Voltage/Constant Current mode.
- Output Switch Button: Toggles the power output on and off.
- Voltage Adjustment Knobs: Used to precisely adjust the output voltage.
- Current Adjustment Knobs: Used to precisely adjust the output current.
- Shift Adjustment Buttons: For fine-tuning voltage/current to three decimal places.
- Power Switch: Main power ON/OFF switch for the unit.
- Power Positive and Negative Output Ports: Main terminals for connecting your load.
- 5V2A Fixed USB Output: A dedicated USB port for charging or powering compatible devices.
Rear Panel Layout

The rear panel includes additional safety features and connections:
- AC Power Input: For connecting the main power cord.
- Fuse Holder: Contains the main fuse for protection.
- Rear Output Terminals: Provides an alternative set of output terminals, offering two protection modes (front and rear).
Specifications
| Feature | Specification |
|---|---|
| Model Number | AIFEN 3006 DC Power Supply |
| Output Voltage | 0-30V DC |
| Output Current | 0-6A DC |
| Output Power | 180W |
| Current Type | DC |
| Regulation Type | Encoder Regulation |
| Ripple | Ultra Low Ripple |
| Protection Modes | Continuous Overcurrent Protection (OCP), Constant Voltage (C.V), Constant Current (C.C) |
| USB Output | 5V2A Fixed Output |
| Dimensions (L x W x H) | 21.5cm x 11.5cm x 17cm (approx.) |
| Weight | 1.26 kg (approx.) |
| Origin | Mainland China |
| Certification | CE, WEEE |

Setup
- Unpacking and Inspection: Carefully remove the power supply from its packaging. Inspect the unit for any signs of physical damage. If damage is found, do not operate the device and contact customer support.
- Placement: Place the power supply on a stable, level surface with adequate ventilation. Ensure that the air intake and exhaust vents (located on the sides and rear) are not obstructed.
- Power Connection:
- Ensure the main power switch on the front panel is in the OFF position.
- Connect the provided power cord to the AC Power Input on the rear panel.
- Plug the other end of the power cord into a suitable grounded AC power outlet (AU, UK, US, or EU standard, depending on your model).
- Load Connection:
- Before connecting any load, ensure the power supply's output is OFF (Output Switch Button).
- Connect your circuit or device to the Power Positive (+) and Negative (-) Output Ports on the front panel. Alternatively, use the rear output terminals for specific applications requiring additional protection modes.
- Ensure all connections are secure and correct polarity is observed.
Operating Instructions
- Power On: Flip the main Power Switch on the front panel to the ON position. The display will illuminate.
- Setting Voltage and Current:
- Use the Voltage Adjustment knobs to set the desired output voltage. Rotate clockwise to increase, counter-clockwise to decrease.
- Use the Current Adjustment knobs to set the desired current limit. This acts as a safety limit for your circuit.
- For precise adjustments to three decimal places, use the Shift Adjustment buttons.
- Activating Output: Once voltage and current limits are set, press the Output Switch Button to enable the power output. The display will show the actual output voltage, current, and power being delivered to the load.
- Constant Voltage (C.V) and Constant Current (C.C) Modes:
- The power supply automatically operates in Constant Voltage (C.V) mode when the load current is below the set current limit. The C.V indicator will be lit.
- If the load current reaches the set current limit, the power supply will switch to Constant Current (C.C) mode, maintaining the set current while the voltage drops. The C.C indicator will be lit.
- Overcurrent Protection (OCP): The AIFEN 3006 features Continuous Overcurrent Protection. If an overcurrent condition occurs, the OCP indicator will light up, and the output may be shut down to protect the connected device and the power supply. Reset by turning off the output, correcting the fault, and then turning the output back on.
- Using the 5V2A USB Output: This port provides a fixed 5V, 2A output for charging or powering USB-compatible devices. It operates independently of the main adjustable output.
- Power Off: First, press the Output Switch Button to disable the output. Then, flip the main Power Switch to the OFF position.
Maintenance
- Cleaning: Regularly clean the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.
- Ventilation: Periodically check that the ventilation openings are clear of dust and debris. Use compressed air to gently clear any blockages if necessary.
- Fuse Replacement: If the power supply does not turn on, check the fuse located in the rear panel's fuse holder. Replace it only with a fuse of the same type and rating. Refer to the label near the fuse holder for specifications.
- Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power when turned on | Power cord not connected; Power outlet faulty; Blown fuse. | Check power cord connection; Test power outlet; Replace fuse with correct rating. |
| No output voltage/current | Output switch is OFF; Voltage/current set to zero; OCP activated. | Press Output Switch button; Adjust voltage/current settings; Check for short circuit in load, then reset OCP. |
| Voltage drops significantly under load | Power supply in Constant Current (C.C) mode; Load resistance too low for set current. | Increase current limit; Check load for short circuit or excessive current draw. |
| Unit overheats | Blocked ventilation; Excessive continuous load. | Ensure vents are clear; Reduce load or operate for shorter periods. |
User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience with the AIFEN 3006 DC Power Supply:
- Start Low: When connecting a new circuit, always start with the voltage and current limits set to their minimums, then gradually increase to the desired levels. This helps prevent accidental damage.
- Monitor Displays: Pay attention to the voltage, current, and power displays. Unexpected readings can indicate a problem with your circuit or the power supply settings.
- Utilize Protection: The OCP, C.V, and C.C modes are designed to protect your equipment. Understand how they work and how to reset them if triggered.
- Clean Connections: Ensure all output connections are clean and tight to minimize resistance and ensure accurate power delivery.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.