Hyper Tough 12 Amp Electric Leaf Blower and Vacuum Combo

1. Safety Information

Please read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

General Safety Warnings

• Always wear eye protection and hearing protection when operating the leaf blower/vacuum.
• Wear long pants, long sleeves, gloves, and sturdy footwear. Do not wear loose clothing or jewelry that could get caught in moving parts.
• Keep children, bystanders, and pets at least 50 feet (15 meters) away from the operating area.
• Do not operate the unit in wet conditions or rain.
• Inspect the work area before use and remove any objects that could be thrown or entangled in the unit.
• Always disconnect the power cord before cleaning, servicing, or when not in use.
• Do not use the unit if the power cord is damaged.
• Hold the unit firmly with both hands during operation.

2. Product Overview

The Hyper Tough 12 Amp Electric Leaf Blower and Vacuum Combo is a versatile 3-in-1 tool designed for blowing, mulching, and vacuuming leaves and debris. It features a powerful 12 Amp motor, a durable metal impeller, and two-speed settings for various tasks.

Key Features:

• 3-in-1 Functionality: Blower, Mulcher, and Vacuum modes.
• Powerful Motor: 12 Amp electric motor.
• High Performance: Up to 250 MPH blower speed and 400 CFM air volume.
• Efficient Mulching: 16:1 mulching ratio, reducing 16 bags of leaves to 1.
• Durable Construction: Equipped with a metal impeller for extended life.
• Variable Control: 2 speeds for different types of surfaces and jobs.
• Collection Bag: Included 1.2 bushel collection bag.

This image displays the main unit with its interchangeable attachments for blowing and vacuuming. The red and black design is visible, highlighting the compact blower on the left and the larger vacuum assembly on the right.

3. Setup

Assembly for Blower Mode:

1. Ensure the unit is unplugged from the power source.
2. Align the blower tube with the outlet on the main motor housing.
3. Twist the blower tube clockwise until it locks securely into place.

This image shows the main unit with the narrow blower nozzle attached, ready for use as a leaf blower.

Assembly for Vacuum/Mulcher Mode:

1. Ensure the unit is unplugged from the power source.
2. Attach the vacuum tube to the intake opening on the main motor housing. Twist to secure.
3. Attach the collection bag to the exhaust port of the motor housing. Ensure the bag's opening is fully seated and secured to prevent debris leakage.
4. Zip up the collection bag if it is not already closed.

This image illustrates the main unit with the wider vacuum tube and the collection bag attached, prepared for vacuuming leaves.

A close-up of the black fabric collection bag with a zipper, designed to attach to the leaf vacuum for collecting mulched debris.

4. Operating Instructions

Connecting to Power:

Use a suitable outdoor-rated extension cord. Ensure the extension cord is in good condition and rated for the amperage of the unit (12 Amp).

Starting and Stopping:

To start the unit, press the ON/OFF switch to the 'ON' position. To stop, press the switch to the 'OFF' position.

Speed Selection:

This unit features 2-speed settings. Use the speed selector switch to choose between low and high speed depending on the task and debris type. Low speed is suitable for delicate areas or light debris, while high speed provides maximum power for stubborn leaves.

Using as a Blower:

1. Ensure the unit is assembled in blower mode.
2. Hold the blower firmly with both hands.
3. Direct the nozzle towards the leaves or debris you wish to move.
4. Sweep the nozzle from side to side to gather leaves into piles.

A person is shown using the Hyper Tough leaf blower to clear leaves from a paved driveway, demonstrating typical usage.

Using as a Vacuum/Mulcher:

1. Ensure the unit is assembled in vacuum/mulcher mode with the collection bag attached.
2. Hold the vacuum firmly with both hands.
3. Slowly move the vacuum nozzle over the leaves and debris. The unit will suck up the leaves and mulch them before depositing them into the collection bag.
4. Avoid vacuuming large, hard objects like rocks, sticks, or metal, as these can damage the impeller.

A person is depicted using the Hyper Tough leaf vacuum to collect leaves from a grassy area, with the collection bag visible.

5. Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool. Always disconnect the power cord before performing any maintenance.

Cleaning the Unit:

• After each use, wipe down the exterior of the unit with a damp cloth.
• Remove any debris from the air vents to prevent overheating.
• Periodically inspect the impeller area for any lodged debris. If necessary, carefully remove any obstructions after ensuring the unit is unplugged.

Collection Bag Care:

• Empty the collection bag frequently to maintain vacuuming efficiency.
• Clean the collection bag by shaking out debris. If heavily soiled, it can be rinsed with water and allowed to air dry completely before reattaching.

Cord Care:

• Inspect the power cord and extension cord for any cuts, fraying, or damage before each use. Replace damaged cords immediately.
• Store the cord properly to avoid kinks and damage.

6. Troubleshooting

7. Specifications

8. User Tips

• For best vacuuming results, gather leaves into a loose pile before attempting to vacuum. This prevents the unit from getting bogged down by spreading out too much.
• When blowing, start with the lower speed setting for lighter debris or around delicate plants, then switch to high speed for heavier leaf piles or larger areas.
• Always ensure the collection bag zipper is fully closed when vacuuming to prevent debris from escaping.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.