MEISHIDA 580B Smart Toilet User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEISHIDA 580B Smart Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

The MEISHIDA 580B is a compact, integrated smart toilet designed for small households, featuring automatic functions, no water pressure limit, and a space-saving design.

Figure 1: MEISHIDA 580B Smart Toilet (Grey/White model)

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Ensure the power supply is AC220V 50HZ.
• Do not expose the product to excessive moisture or water beyond its IPX4 rating.
• Avoid disassembling or modifying the product yourself. Contact qualified service personnel for repairs.
• Keep children and pets away from the bidet nozzle when in operation.
• Do not use abrasive cleaners or harsh chemicals on the toilet surface.
• Ensure proper grounding during installation.
• The product includes eight safety precautions: overvoltage protection, overheating protection, pressure relief, seat ring protection, moisture protection, leakage protection, IPX4 waterproof, and anti-scald protection.

Figure 2: Overview of the eight safety precautions.

3. Package Contents

Verify that all components are present and undamaged upon unpacking:

• MEISHIDA 580B Smart Toilet Unit
• Remote Control
• Installation Hardware (e.g., mounting bolts, seals)
• Flush Pipe Component
• User Manual (this document)

4. Specifications

Figure 3: Product parameters and dimensions. Note: Manual measurements may have slight errors; refer to the actual product.

Figure 4: The 580B model (59cm) offers a 20% space saving compared to a standard 70cm toilet.

5. Installation and Setup

Professional installation is recommended for this smart toilet. Ensure all local plumbing and electrical codes are met.

5.1 Pre-installation Checks

• Verify the rough-in distance: The distance from the center of the sewer opening to the finished wall (with tile) must be 180 mm. Incorrect measurements may prevent installation.
• Power supply: Ensure a dedicated AC220V 50HZ power outlet is available near the installation area.
• Water supply: Confirm a cold water supply line is accessible.
• Drainage type: This model uses wall drainage (P-trap) by default. If floor drainage is required, a specific model for floor drainage must be ordered. Please contact customer service for guidance if your bathroom requires floor drainage or has specific water outlet/switch configurations.

5.2 Installation Steps (General Guidance)

1. **Prepare the Area**: Turn off the main water supply and ensure the installation area is clean and clear.
2. **Positioning**: Carefully position the toilet unit, aligning the drainage outlet with the floor or wall drain.
3. **Secure the Unit**: Use the provided installation hardware to securely fasten the toilet to the floor.
4. **Connect Water Supply**: Connect the water supply line to the toilet's inlet. Ensure all connections are tight to prevent leaks.
5. **Electrical Connection**: Connect the power cord to the dedicated AC220V 50HZ outlet.
6. **Test**: Turn on the main water supply and check for leaks. Perform a test flush and verify all smart functions are operational.

Figure 5: Wall-mounted drainage schematic. Ensure the rough-in distance from the wall to the center of the sewer opening is 180mm.

Important Note: Wall drainage is used by default. If you require floor drainage, you must specifically order a compatible model. Please contact customer service for assistance.

6. Operating Instructions

Your MEISHIDA 580B Smart Toilet offers a range of intelligent features for enhanced comfort and hygiene.

6.1 Power On/Off and Basic Controls

The toilet features an intelligent one-button knob for primary control and an LED digital display on the top panel.

Figure 6: Intelligent one-button knob for various functions.

• **Power On/Off**: Press the knob to toggle the power.
• **Stop Function**: Press the knob during operation to stop the current function.
• **LED Digital Display**: The top panel displays real-time icons for functions like wind (drying), water (washing), seat (heating), and auto mode.

Figure 7: The LED digital display provides real-time status of active functions.

6.2 Bidet Functions

The smart toilet offers multiple washing modes with adjustable water temperature for personalized hygiene.

• **Female Wash**: Rotate the knob counter-clockwise to activate a soft spray for delicate and sensitive skin care.
• **Buttock Wash**: Rotate the knob clockwise for precise cleaning and rinsing.
• **Mobile Wash**: The nozzle moves back and forth to expand the cleaning area.
• **Self-Cleaning Nozzle**: The antibacterial cleaning nozzle automatically cleans itself before and after each use.

Figure 8: Visual representation of female wash, buttock wash, mobile wash, and self-cleaning nozzle functions.

Figure 9: Four-speed adjustable water temperature for washing modes (approx. 34°C, 37°C, 40°C).

6.3 Comfort Features

• **Heated Seat**: The seat ring maintains a constant temperature with four adjustable settings (approx. 34°C, 37°C, 40°C) to adapt to different seasons.
• **Warm Air Drying**: After washing, activate the warm air dryer for a comfortable and refreshing experience. It has three temperature settings (approx. 35°C, 45°C, 55°C).
• **Quiet Slow-Close Lid**: The toilet lid and seat close gently and quietly, preventing slamming.

Figure 10: Heated seat with adjustable temperature levels.

Figure 11: Warm air drying with adjustable temperature levels.

6.4 Hygiene and Automatic Features

• **UV Sterilization**: The spray rod utilizes UV light for sterilization, helping to eliminate bacteria and prevent cross-contamination. UV radiation is used for photolysis of bacterial protein, and at the same time, UV light ionizes oxygen in the air to form ozone, which enhances the bactericidal effect.
• **Foam Shield**: A layer of insulating foam is applied to the toilet's sealing surface to effectively prevent splashing, odor evaporation, and keep the bowl clean.
• **Automatic Lid Flip (Radar Sensor)**: The toilet features a radar sensor that can automatically open and close the lid. After a user leaves the seat, it automatically flushes.
• **No Water Pressure Limit**: The toilet is designed to operate effectively without requiring high water pressure, making it suitable for various residential settings. It has a built-in water reservoir and an automatic booster pump for strong flushing impulse.

Figure 12: UV sterilization process targeting bacteria within the toilet bowl.

Figure 13: The foam shield creates a barrier against splashes and odors.

Figure 14: The radar sensor detects presence for automatic lid operation and flushing.

Figure 15: Diagram illustrating the toilet's ability to function without high water pressure, thanks to its internal booster pump.

6.5 Product Demonstration Video

7. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.

• **General Cleaning**: Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, as they can damage the finish.
• **Nozzle Cleaning**: The bidet nozzle has a self-cleaning function. For deeper cleaning, gently wipe the nozzle with a soft cloth.
• **Foam Shield Maintenance**: The foam shield helps maintain cleanliness. Ensure the foam generator is not obstructed.
• **UV Sterilization**: The UV sterilization feature operates automatically to keep the bowl hygienic. No user maintenance is typically required for the UV light itself.
• **Filter Maintenance**: The live water filtration system helps ensure clean water for washing. Consult the manufacturer if filter replacement is needed (not explicitly stated in data, but common for such systems).
• **Power Off for Deep Cleaning**: Always unplug the toilet from the power outlet before performing any deep cleaning or maintenance.

8. Troubleshooting

If you encounter issues with your MEISHIDA 580B Smart Toilet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact MEISHIDA customer support.

Figure 16: Important note regarding the voice control feature's language limitations.

9. User Tips

• **Space Saving**: The compact 58cm design is ideal for smaller bathrooms, maximizing available space.
• **Consistent Flushing**: The "no water pressure limit" feature ensures powerful flushing even in areas with low water pressure, thanks to its built-in booster pump.
• **Hygiene First**: Utilize the UV sterilization and foam shield features for enhanced cleanliness and odor control.
• **Personalized Comfort**: Experiment with the adjustable temperature settings for the heated seat and warm air dryer to find your preferred comfort level.

10. Warranty and Support

The MEISHIDA 580B Smart Toilet comes with a 3-year warranty on the smart cover component. For warranty claims or technical support, please contact your retailer or MEISHIDA customer service.

When contacting support, please have your product model number (580B) and the product barcode readily available. The barcode is typically located inside the toilet lid.

Figure 17: Example of a product barcode. Note: Different product codes vary. Do not tear or damage the barcode as it is essential for warranty claims.