1. Product Overview
The LVYUAN Power Inverter converts 12V DC power from your vehicle's battery into standard 110V (US) or 220V (EU) AC power, allowing you to operate various electronic devices on the go. It features an intelligent LCD display for monitoring and multiple safety protection functions.
2. Package Contents
- 1 x Power Inverter (1500W/2000W/2600W model)
- 1 x User Manual
- Battery clamps (for direct battery connection)
- Cigarette lighter adapter (for low-power applications)
- Spare fuses
3. Setup Instructions
-
Choose Connection Method:
- For devices with a rated input exceeding 150W, use the included battery clamps to directly connect the inverter to your vehicle's 12V battery. Most vehicle 12V ports (cigarette lighters) are rated and fused for a maximum of 150W.
- For devices under 150W, you may use the cigarette lighter adapter.
-
Connect to Power Source:
- Ensure the inverter's power switch is in the 'OFF' position.
- Connect the red (positive) cable from the inverter to the positive terminal of your 12V battery.
- Connect the black (negative) cable from the inverter to the negative terminal of your 12V battery.
- WARNING: Do not connect the inverter with grid power. Reverse connection of positive and negative terminals is forbidden and can cause damage.
- Power On: Once connected, switch the inverter to the 'ON' position. The LED indicator should light up, and the LCD display will show operational information.
4. Operating Instructions
- Connect Appliances: Plug your AC-powered devices into the inverter's AC outlets. You can also use the USB ports for charging compatible devices.
-
Monitor Display: The intelligent LCD display provides real-time information:
- Battery Capacity: Shows the remaining charge of your 12V battery.
- Battery Voltage: Displays the current DC input voltage.
- Output Voltage: Shows the AC output voltage provided by the inverter.
- Load Power: Indicates the power consumption of connected devices.
-
Power Considerations:
- Ensure the rated power of your appliance(s) is less than the continuous power of the inverter.
- If running multiple devices, refer to their total wattage.
- Important for Inductive Loads: This inverter produces a Modified Sine Wave. For inductive loads (e.g., refrigerators, drills, washing machines, water pumps, microwave ovens, vacuum cleaners, hair dryers, and other devices with motors), choose an inverter whose continuous power is 3-7 times higher than the appliance's wattage. Modified sine wave inverters may not be suitable for all sensitive electronics or heavy inductive loads.
- Do not overload the inverter.
5. Maintenance
- Cleaning: Keep the inverter clean and free from dust and debris to ensure proper ventilation.
- Fuses: The inverter is equipped with fuses for short circuit protection. Spare fuses are included in the package and should only be used if the original ones are burned out due to an accident.
- Heat Dissipation: The aluminum alloy casing is designed for efficient heat dissipation. Ensure the cooling fan is not obstructed and operates freely.
6. Troubleshooting
The inverter features 6 safety protection functions that will automatically shut down the unit in case of an issue. The LCD display may show an error code (E-1 to E-6) or indicate the type of fault.
- Low Input Voltage Protection (E-1): The inverter will shut down if the DC input voltage drops below 9.5V (±0.5V). Check your battery charge.
- High Input Voltage Protection (E-2): The inverter will shut down if the DC input voltage exceeds 15.5V. Verify your vehicle's charging system.
- Over Temperature Protection (E-3): The inverter will shut down automatically if it overheats. Ensure proper ventilation and reduce the load.
- Overload Protection (E-4): The inverter will shut down if the connected load exceeds its continuous power rating. Reduce the load.
- Short Circuit Protection (E-5): The inverter will shut down in case of a short circuit in the output. Disconnect all loads and check for faults.
- Repeated Faults Shutdown (E-6): If multiple faults occur repeatedly, the inverter may require a manual restart. Turn the inverter off, disconnect from the power source, wait a few minutes, then reconnect and power on.
- Reverse Polarity Protection: Protects against incorrect battery connections.
7. Specifications
| Feature | Specification |
|---|---|
| Output Waveform | Modified Sine Wave |
| Continuous Power | 750W / 1000W / 1300W (depending on model) |
| Peak Output Power | 1500W / 2000W / 2600W (depending on model) |
| Frequency | 50HZ±2HZ or 60HZ±2HZ |
| No Load Current Draw | <0.8Amps |
| Conversion Efficiency | >90% |
| Input DC Voltage | 12V |
| DC Voltage Range | 10.5V-15.5V |
| Output AC Voltage | 110V (US) / 220V (EU) |
| AC Voltage Range | 110-130V / 220V-240V |
| USB Output | Yes |
| Low Voltage Alarm | 10DC±0.5V |
| Low Voltage Shut Down | 9.5DC±0.5V |
| Over Voltage Shut Down | 15.5V |
| Overload Protection | Shuts off output |
| Over Thermal Protection | Shuts off output automatically |
| Fuses | Short Circuit protection |
| Start | Soft Start |
| Material | Aluminum Alloy |
| Socket Style | EU / US (depending on model) |
| Machine Size (L*W*H) | 1500W: 210mm * 110mm * 60mm 2000W: 240mm * 110mm * 60mm 2600W: 260mm * 110mm * 60mm |
| Net Weight | 0.8KG / 1KG / 1.2KG (depending on model) |
8. User Tips
- DC to AC Conversion Only: This device is a DC to AC power inverter. It converts 12V DC power from a battery to 110V/220V AC power. It does not convert AC power to DC power.
- Total Wattage: When powering multiple devices, always sum their individual wattages to ensure the total does not exceed the inverter's continuous power rating.
- Cable Usage: Always use the standard battery cables provided with the inverter to ensure optimal performance and safety.
9. Warranty and Support
For any questions, technical support, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt for warranty purposes.