1. Introduction
Thank you for choosing the HOMCOM 5 Piece Bar Table and Stools Set. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new furniture. This industrial-style set, featuring a tall table and four matching stools, is designed to offer a compact and functional dining or gathering space. Its sturdy metal frames and durable MDF tops ensure longevity and stability. Please read this manual thoroughly before assembly and retain it for future reference.
2. Safety Information
Please observe the following safety precautions to prevent injury and damage to the product:
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are present and undamaged before beginning assembly.
- Tighten all screws and bolts securely, but do not overtighten. Periodically check and re-tighten fasteners.
- Do not stand on the table or stools.
- Distribute weight evenly on the table surface.
- Keep small parts away from children during assembly.
- Maximum load capacity: Table 50kg, Stool 120kg. Do not exceed these limits.
- Use the adjustable feet to ensure the table and stools are stable on uneven surfaces.
3. Package Contents
Verify that all components listed below are included in your package:
- 1 x Bar Table (MDF top, Metal frame)
- 4 x Bar Stools (MDF seat, Metal frame)
- Assembly Hardware (screws, bolts, Allen wrench, etc.)
- Instruction Manual (this document)
4. Assembly Instructions
Assembly is required for this product. Please follow these steps carefully. It is recommended to have two people for assembly.
4.1 Tools Required
- Included Allen Wrench
- Phillips Head Screwdriver (not included, may be needed for some fasteners)
4.2 Bar Table Assembly
- Unpack all table components and lay them out on a protected surface.
- Attach the metal legs to the underside of the MDF table top using the provided screws and bolts. Ensure the frame is oriented correctly.
- Secure any crossbars or support beams between the legs as indicated in the diagram.
- Once the frame is assembled, gently stand the table upright.
- Adjust the foot pads at the bottom of each leg to ensure the table is level and stable.


4.3 Bar Stool Assembly
- Unpack all stool components for one stool.
- Attach the metal legs to the underside of the round MDF stool seat.
- Connect the footrest ring or crossbars between the legs, ensuring they are securely fastened.
- Repeat for the remaining three stools.
- Adjust the foot pads on each stool for stability.
5. Usage
Your HOMCOM Bar Table and Stools Set is designed for versatile use in your home.
- Space-Saving Design: The stools are designed to neatly tuck under the table when not in use, optimizing space in smaller areas.
- Versatile Use: Ideal for breakfast, casual dining, a coffee break, or as an additional surface for entertaining.
- Stability: Utilize the adjustable foot pads on both the table and stools to ensure maximum stability on various floor types.

6. Maintenance and Care
To ensure the longevity and appearance of your bar set, follow these care instructions:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the MDF or metal finish.
- Spills: Clean up spills immediately to prevent staining or water damage to the MDF tops.
- Fasteners: Periodically check all screws and bolts and re-tighten them as necessary to maintain structural integrity.
- Placement: Avoid placing the furniture in direct sunlight or near heat sources to prevent warping or fading.
7. Troubleshooting
If you encounter any issues with your bar table and stools set, please refer to the following common solutions:
- Wobbling Table/Stools: Ensure all assembly screws are tightly secured. Use the adjustable foot pads to level the furniture on uneven floors.
- Scratches/Dents: Minor scratches on MDF can sometimes be touched up with furniture repair pens. For deeper damage, contact customer support.
- Missing Parts: If any parts were missing upon delivery, please contact the seller immediately for replacements.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Name | 5 Piece Bar Table and Stools Set |
| Item Label | 835-890V00GY |
| Color | Grey, Black |
| Material | MDF, Metal |
| Table Dimensions (L x W x H) | 110 cm x 50 cm x 89.5 cm |
| Stool Dimensions (Diameter x H) | Ф30 cm x 60.5 cm |
| Table Footrest Height | 22 cm |
| Stool Footrest Height | 17 cm |
| Table Weight Capacity | 50 kg |
| Stool Weight Capacity | 120 kg |
| Package Length | 126 cm |
| Package Width | 62 cm |
| Package Height | 17 cm |
| Package Weight | 23.1 kg |
9. User Tips
- To maximize space in smaller living areas, always tuck the stools completely under the table when not in use.
- For optimal stability, especially on hard floors, ensure the adjustable foot pads are properly configured to eliminate any wobbling.
10. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.