1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the EG-22A (also known as EGA-10) 24V PCB Control Board. This smart control center system is designed for automatic double arms swing gate openers, offering customizable functions and enhanced security features. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
2. Safety Information
- Always disconnect power before performing any installation, maintenance, or troubleshooting.
- Ensure all wiring is correctly connected according to the diagrams provided. Incorrect wiring can damage the board or connected devices.
- This control board operates at DC 24V. Verify your power supply matches this requirement.
- Keep the control board dry and protected from environmental elements.
- Installation should be performed by qualified personnel if you are unsure about any steps.
- The system includes a 10A protection fuse. Do not bypass or replace with a fuse of a different rating.
3. Product Overview
The EG-22A control board is a central component for managing automatic swing gate openers. It features a digital tube display for function settings, various input/output ports, and dedicated keys for learning and function adjustments.
Key Components:
- Digital Tube Display: Shows current function settings and status.
- Function Setting Keys (INC+, FUN, DEC-): Used to navigate and adjust various operational parameters.
- Learning Code Key: For pairing remote controls with the board.
- Power Port: Connects to the 24V DC power supply.
- Motor Connections (MOTOR1, MOTOR2): Terminals for connecting the two swing gate motors.
- Multifunctional External Port: Allows connection of accessories such as wireless keypads, alarm lights, and infrared sensors.
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | EG-22A(EGA-10) |
| Product Name | Swing gate control board |
| Function | Swing gate opener motor control |
| Voltage | DC 24V |
| Output Voltage | DC 24V |
| Protection Fuse | 10A |
| Frequency | 433.92Mhz Encrypt |
| Use for | 12/24V swing gate motor |
| Universal Compatibility | Giant, JUJIANG, EZYOPENTECK and similar |
5. Compatibility
The EG-22A control board is compatible with all EZYOPENTECK and GIANT JUJIANG swing gate openers. It is also designed to be universal for various 12V/24V swing gate motors. If you are unsure about compatibility with your specific gate opener or remote control, especially regarding remote control frequencies in different regions (e.g., Russia, Poland, Spain, Australia, Germany), please contact customer support for verification before purchase.
6. Setup and Installation
Follow these steps to install and set up your EG-22A control board. Ensure power is disconnected before starting.
6.1 Wiring Connections
Refer to the detailed wiring diagram below for connecting the power supply, motors, and external accessories.
- Power Connection: Connect the DC 24V power supply to the designated Power Port on the board.
- Motor Connections: Connect your swing gate motors to the MOTOR1 and MOTOR2 terminals. Ensure correct polarity as per your motor's specifications.
- External Devices: Utilize the Multifunctional External Port for connecting optional accessories such as wireless keypads, alarm lights, and infrared sensors. Consult the specific accessory's manual for wiring details.
6.2 Remote Control Pairing
To pair remote controls with your EG-22A board:
- Press the 'LEARN' key on the control board. The digital display may indicate a learning mode.
- While in learning mode, press the desired button on your remote control.
- The board will confirm successful pairing (e.g., a beep or a change in the digital display).
- Repeat for additional remote controls or buttons as needed.
Important Note on Remote Control Frequency: The EG-22A operates at 433.92Mhz Encrypt. Ensure your remote controls match this frequency. Different regions may use different frequencies, so verify compatibility, especially if purchasing the board separately from your remote controls.
7. Operating Instructions
The EG-22A control board allows for easy and accurate function setting via its digital tube display and dedicated keys.
7.1 Function Setting
Use the 'FUN', 'INC+', and 'DEC-' keys to navigate and adjust the board's functions:
- FUN Key: Press to cycle through available functions. The digital display will show the current function code.
- INC+ Key: Increases the value or option for the selected function.
- DEC- Key: Decreases the value or option for the selected function.
Specific function codes and their corresponding adjustments will be detailed in a separate function parameter guide (not provided in this general manual). Typically, these settings include motor run time, auto-close delay, force adjustments, and more.
7.2 Basic Operation
Once installed and remote controls are paired:
- Press the assigned button on your remote control to open the gate.
- Press again to stop the gate during operation.
- Press a third time to close the gate.
- If auto-close is enabled, the gate will close automatically after the set delay.
8. Maintenance
Regular maintenance ensures the longevity and reliable operation of your EG-22A control board:
- Visual Inspection: Periodically check the board for any signs of damage, corrosion, or loose connections.
- Cleanliness: Keep the board free from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning.
- Wiring Integrity: Ensure all wires are securely connected and free from fraying or damage.
- Environmental Protection: Ensure the control board is housed in a protective enclosure to shield it from rain, extreme temperatures, and pests.
9. Troubleshooting
If you encounter issues with your EG-22A control board, consider the following common problems and solutions:
- Gate not responding:
- Check power supply to the board.
- Verify remote control battery and pairing.
- Inspect motor connections for looseness or damage.
- Check the 10A protection fuse on the board.
- Gate opens/closes partially:
- Review motor run time settings using the function keys.
- Check for physical obstructions in the gate's path.
- Remote control not working after pairing:
- Ensure the remote control's frequency matches the board's 433.92Mhz.
- Re-attempt the pairing process.
- Check remote control battery.
- Digital display not lighting up:
- Confirm power supply is connected and active.
- Check the protection fuse.
9.1 User Tips
- Always test the gate's operation thoroughly after any installation or setting changes.
- Consider installing an emergency release mechanism for manual gate operation during power outages.
- For optimal security, ensure your gate area is clear of obstacles and visible during operation.
10. Warranty and Support
For any questions, technical support, or warranty inquiries regarding your ezyopenteck EG-22A control board, please contact us directly.
Email: ezyopenteck@outlook.com
ezyopenteck is committed to providing professional service and continuously improving its products. Your feedback is valuable.
