1. Introduction
The Irradio UV-98 PLUS is a versatile multi-band walkie talkie designed for a wide range of communication needs. Featuring a 2.4-inch TFT HD large color screen, 10W output power, and multiple frequency bands including FM, AM, SSB, and HF, it offers robust performance. Key functionalities include triple frequency standby, cross-band repeater capabilities, one-click frequency measurement, and customizable controls. This manual provides essential information for safe and effective operation of your device.
2. Package Contents
Please check the box for the following items:
- Iradio UV-98 PLUS Radio Unit
- Base Charger
- Power Adapter (Charger)
- Battery (2400mAh Li-ion)
- Type-C Charging Cable
- Belt Clip
- Antenna
- Lanyard
- User Manual

Image: Contents of the Irradio UV-98 PLUS package.
3. Product Overview
Familiarize yourself with the main components and controls of your Irradio UV-98 PLUS walkie talkie:

Image: Labeled diagram of the Irradio UV-98 PLUS walkie talkie.
- Antenna: For transmitting and receiving signals.
- Short/Medium/Long Wave FM Antenna: Specific antenna for these bands.
- ON/OFF/Volume Knob: Powers the device on/off and adjusts volume.
- Indicator: Status light.
- Alarm button: Activates emergency alarm.
- Launch key: PTT (Push-To-Talk) button.
- Side key 1 & 2: Customizable shortcut keys.
- Menu Function Area: Navigation and selection buttons.
- Type-C Charger: Charging port.
- Keypad: For frequency input and menu navigation.
- Earphone terminal: For connecting an external earphone/microphone.
4. Specifications
| Feature | Description |
|---|---|
| Product Model | UV-98 PLUS |
| Output Power (W) | 5W-10W |
| Frequency Range | CB: 27MHz RX/TX (AM/USB/LSB/CW reception) FM: 64-108MHz RX SW: 2.3-30MHz RX MW: 520-1710KHz RX LW: 153-279KHz RX TX/RX: 18-64MHz, 136-520MHz RX (AM/FM/SSB): 18-620MHz, 840-999MHz |
| Storage Channels | 1024 + 3 VFO |
| Channel Spacing | 25KHz/12.5KHz |
| Operating Voltage | 7.4V DC |
| Battery Capacity | 2400mAh |
| Charging Method | Type-C/Dock Charging |
| Dimension | 149 x 64 x 37mm (Antenna not included) |
| Weight | 307g |
| Frequency Stability | ±2.5ppm |
| Working Temperature | 20°C - 60°C |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Material | Plastic |
| Maximum Range | 5km-10km |
Image: Detailed technical parameters of the Irradio UV-98 PLUS.


Image: Dimensions of the Irradio UV-98 PLUS walkie talkie.
5. Setup
5.1. Battery Installation
- Align the battery pack with the battery compartment on the back of the radio.
- Slide the battery pack into place until it clicks securely.
- To remove, press the release latch and slide the battery out.
5.2. Antenna Attachment
Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.

Image: Detachable antenna nut, compatible with various antennas including donut antennas.
5.3. Charging the Battery
The UV-98 PLUS supports two charging methods:
- Base Charger: Place the radio unit with the battery installed into the charging cradle. Ensure the charging contacts align. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).
- Type-C Direct Charging: Connect the provided Type-C USB cable to the Type-C port on the side of the radio and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, car charger).

Image: Multiple charging methods for the Irradio UV-98 PLUS.
6. Operating Instructions
6.1. Power On/Off and Volume
Turn the ON/OFF/Volume knob clockwise to power on the radio. Continue turning to increase volume. Turn counter-clockwise to decrease volume and power off.
6.2. Switching Frequency Ranges
The radio supports different frequency ranges, but they cannot operate simultaneously. You must select the desired range and use a compatible antenna.
- Press the Menu button.
- Navigate to Basic Settings.
- Scroll to and select Work Range.
- Choose your desired frequency range: 18-64MHz, 64-620MHz, or 840-1000MHz.
- Confirm your selection. The radio will restart.
- Important: Always replace the antenna with one compatible with the selected frequency range (e.g., a 27MHz CB antenna for the 18-64MHz range).
Video: Demonstration of unboxing and key features, including frequency range switching (starts around 2:39).
6.3. Customizing Keys Shortcuts
You can personalize the functions of the side keys and keyboard for quick access to frequently used features.
- Press the Menu button.
- Navigate to Key Define.
- Select the key you wish to customize (e.g., Side Key 1 S, Side Key 1 L, etc.).
- Choose a function from the list (e.g., Power Switch, Scanning, VOX, FM Radio, etc.).
- Confirm your selection.

Image: Customizing side keys and keyboard functions.
6.4. One-Click Frequency Measurement
This feature allows for fast frequency matching.
- Ensure the radio is in the correct frequency band for measurement (Menu > Analog Settings > Detect Range).
- Press the shortcut button that has been assigned the frequency matching function. The radio will display detected frequencies.
6.5. FM Radio Operation
The radio can store up to 128 FM channels.
- Enter the Menu.
- Navigate to FM Radio.
- You can save the current FM frequency and edit its name.
- In FM radio mode, long press the # button to switch between Shortwave (SW), Medium Wave (MW), and Long Wave (LW) bands.
- Short press the * button to move the cursor and adjust frequency or other settings as needed.
6.6. Cross-Band Repeater Function
The cross-band repeater allows your mobile radio to transmit signals further, extending operating range.
- Press the Menu button.
- Navigate to Basic Settings.
- Enable Multi Standby and then UV Repeater.
- Set a frequency point for both the A frequency and B frequency in the UHF/VHF band.
- For convenient activation, customize a button for the Cross Band Repeater Switch in the Key Define menu.

Image: Cross-band repeater functionality diagram.
6.7. Other Features
- VOX Function (Voice Activated Transmit): Allows hands-free transmission.
- Frequency and Channel Scanning: Scan for active frequencies or channels.
- Spectrum Scanning: Visualizes active frequencies in the current band.
- Monitoring Function: Listen to weak signals.
- Emergency Alarm: Activates an audible alarm.
- Triple PTT Transmission: Allows transmitting on three different frequencies.
- DTMF Encoding/Decoding: For advanced signaling.
7. Maintenance
7.1. General Care
- Keep the radio dry. If it gets wet, wipe it immediately.
- Do not expose the radio to extreme temperatures.
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Avoid dropping or subjecting the radio to strong impacts.
7.2. Battery Care
- Charge the battery fully before first use.
- Do not overcharge or deep discharge the battery.
- Store the battery in a cool, dry place when not in use.
- If the battery is not used for a long time, charge it every three months to maintain its lifespan.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Radio does not power on. | Ensure the battery is properly installed and charged. Check the ON/OFF/Volume knob. |
| Cannot transmit or receive. | Check antenna connection. Verify correct frequency and channel settings. Ensure you are within range. Confirm the selected frequency range matches the antenna. |
| Poor audio quality. | Adjust volume. Check antenna. Ensure no obstructions. |
| Difficulty programming channels. | Use the dedicated Type-C interface programming cable provided by the manufacturer. Standard USB cables or generic programming cables will not work. Ensure you have the correct UV-98 PLUS frequency writing software. |
| Radio is locked or unresponsive. | Check for any active lock functions in the menu. A factory reset might be necessary if the issue persists (consult support for procedure). |
9. User Tips
- Antenna Matching: Always use an antenna compatible with your selected frequency range. For example, a specific CB antenna is required for 27MHz operation.
- Programming Cable: For computer programming, use only the manufacturer-provided dedicated Type-C interface programming cable. Generic cables will not establish a connection.
- CB Band Modes: The UV-98 PLUS supports RX/TX on CB 27MHz with AM, FM, USB, LSB, and CW reception.
- Cross-Band Repeater: Utilize the cross-band repeater function to extend your communication range by relaying signals between different frequency bands (UHF/VHF).
- Custom Shortcuts: Take advantage of customizable side keys and keyboard functions to quickly access your most used features.
10. Warranty and Support
For warranty information, technical support, or to obtain the frequency writing software, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.