SAGE LU MEI R1-1

Contents

Skydance R1-1 1 Zone Dimming Remote Controller

User Manual

Introduction

The Skydance R1-1 is a compact and portable 1-zone dimming remote controller designed for single-color LED strip lights. It operates on a 2.4G wireless frequency, offering a reliable way to adjust the brightness of your LED lighting. Its magnetic back allows for convenient placement on metal surfaces, or it can be fixed to a wall using screws or adhesive.

Skydance R1-1 White and Black Remote Controllers
Skydance R1-1 Remote Controller in White and Black variants.

Key Features

  • Designed for single-color LED controllers.
  • Each remote can be matched with one or more receivers.
  • Powered by a CR2032 battery.
  • Equipped with an LED indicator light for operational feedback.
  • Features a magnet on the back for easy attachment to metal surfaces.
  • Wireless control distance of up to 30 meters (barrier-free space).

Technical Specifications

Category Parameter Value
Input and Output Output signal RF (2.4GHz)
Working voltage 3VDC (CR2032)
Working current < 5mA
Standby current < 2µA
Standby time 2 years
Remote distance 30m (Barrier-free space)
Safety and EMC EMC standard (EMC) EN301 489, EN62479
Safety standard (LVD) EN60950
Radio Equipment (RED) EN300 328
Certification CE, EMC, LVD, RED
Environment Operation temperature Ta: -30°C ~ +55°C
IP rating IP20
Warranty Warranty Period 5 years
Technical Parameters Table
Detailed technical parameters for the R1-1 remote controller.

Setup and Installation

1. Battery Installation

  1. Open the back holder of the remote.
  2. Insert a CR2032 battery, ensuring correct positive (+) and negative (-) polarity.
  3. Before first use, remove any protective film from the battery.
  4. Close the back holder securely.

2. Mounting Options

The remote can be fixed in three ways:

  • Option 1: Stick directly onto any metal surface using the built-in magnet.
  • Option 2: Fix it on the wall with two screws (screws not included).
  • Option 3: Adhere it to the wall with paste (adhesive not included).
Mechanical Structures and Installations Diagram
Diagram showing battery installation, remote dimensions, and fixing options.

3. Matching the Remote Control (Two Ways)

End users can choose the suitable match/delete method. Two options are available:

Using the Controller's Match Key

Match:

  1. Short press the match key on the LED controller.
  2. Immediately press the on/off key on the R1-1 remote.
  3. The LED indicator on the remote will flash a few times, indicating successful matching.

Delete:

  1. Press and hold the match key on the LED controller for 5 seconds to delete all matched remotes.
  2. The LED indicator on the remote will fast flash a few times, confirming all matched remotes are deleted.

Using Power Restart

Match:

  1. Switch off the power to the LED controller, then switch it on again.
  2. Immediately short press the on/off key on the R1-1 remote 3 times.
  3. The light on the remote will blink 3 times, indicating successful matching.

Delete:

  1. Switch off the power to the LED controller, then switch it on again.
  2. Immediately short press the on/off key on the R1-1 remote 5 times.
  3. The light on the remote will blink 5 times, confirming all matched remotes are deleted.

Operation

The R1-1 remote controller features a single button for all operations:

  • Turn On/Off: Click the button once to turn the connected LED lights on or off.
  • Adjust Brightness: Press and hold the button for 1 to 6 seconds to smoothly increase or decrease the brightness of the LED lights.

Maintenance

  • Battery Replacement: When the remote distance becomes shorter or the remote becomes unresponsive, replace the CR2032 battery. Ensure correct polarity during installation.
  • Storage: If the remote will not be used for an extended period, remove the battery to prevent leakage and damage.
  • Cleaning: Gently wipe the remote with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Handling: Handle the remote gently to prevent damage from falling.

Troubleshooting

  • Remote not responding:
    • Check if the CR2032 battery is installed correctly and has sufficient charge. Replace if necessary.
    • If there is no response from the receiver, please re-match the remote control to the LED controller using one of the methods described in the 'Matching the Remote Control' section.
  • Reduced remote distance:
    • Replace the CR2032 battery.
    • Ensure there are no significant obstructions between the remote and the receiver.

User Tips

No specific user tips were available from reviews or Q&A for this product at this time.

Safety Information

  • Read all instructions carefully before you begin installation and use.
  • When installing the battery, pay close attention to the positive and negative polarity.
  • For prolonged periods without use, remove the battery from the remote control.
  • If the remote distance becomes smaller or the remote becomes insensitive, replace the battery.
  • If there is no response from the receiver, please re-match the remote.
  • Handle the remote gently; beware of falling.
  • This product is intended for indoor and dry location use only.

Warranty & Support

This Skydance R1-1 remote controller comes with a 5-year warranty from the date of purchase.

For further assistance or detailed documentation, you may refer to the official item guides and documents. A user manual in PDF format is available for download: View User Manual (PDF).

Manufacturer Information:
Shenzhen Shengluomei Technology Co., Ltd.
Address: No. 205, No. 6, Lane 2, Wuhiro Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, China

EU Authorized Representative:
Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.