HOSTACK Full LED Bed Frame with Storage Headboard and Charging Station

Contents

HOSTACK Full LED Bed Frame with Storage Headboard and Charging Station

Model: Full LED Bed Frame

Brand: HOSTACK

Introduction

Thank you for choosing the HOSTACK Full LED Bed Frame. This instruction manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bed frame. Please read this manual thoroughly before assembly and retain it for future reference.

This bed frame is designed to offer both comfort and functionality, featuring a modern aesthetic, integrated LED lighting, a convenient charging station, and ample under-bed storage with four drawers.

Safety Information

  • Always follow the assembly instructions carefully.
  • Ensure all parts are securely fastened before use. Periodically check and tighten all connections.
  • Do not exceed the maximum weight capacity of 800 pounds (approximately 363 kg).
  • Keep small parts and packaging materials away from children to prevent choking hazards.
  • Use only the recommended mattress size (10-12 inches thickness) to ensure proper fit and safety.
  • Avoid placing liquids directly on the charging station to prevent electrical hazards.
  • Do not attempt to modify the bed frame or its electrical components, as this may void the warranty and create safety risks.

Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Bed Frame Components (Headboard, Side Rails, Footboard)
  • Wood Slats and Support Legs
  • 4 Under-Bed Storage Drawers (with rollers)
  • Headboard with Integrated LED Lights and Charging Station (USB-A & USB-C ports)
  • Assembly Hardware (screws, bolts, Allen wrench, etc.)
  • Instruction Manual
Diagram showing the dimensions of the Full LED Bed Frame, including headboard, frame, and drawer measurements. Mattress size 10-12 inches, 2 hours assembly, 800lbs capacity, 1 box.
Figure 1: Exploded view and dimensions of the HOSTACK Full LED Bed Frame components. Note the mattress thickness recommendation of 10-12 inches, assembly time of approximately 2 hours, and a weight capacity of 800 lbs. The entire product ships in 1 box.

Setup and Assembly

Assembly is required for this bed frame. It is recommended to have two people for assembly, which typically takes about 40 minutes. All necessary tools and numbered parts are included.

General Assembly Steps:

  1. Unpack and Identify Parts: Lay out all components on a clean, soft surface (like a carpet) to prevent scratches. Match each part to the numbered labels in the included instruction manual.
  2. Assemble the Headboard: Follow the specific instructions to connect the headboard sections, ensuring the LED light strip and charging station are correctly oriented.
  3. Attach Side Rails: Securely connect the side rails to the headboard and footboard using the provided hardware. Do not overtighten until all connections are made.
  4. Install Wood Slats: Place the wood slats across the bed frame, ensuring they are evenly spaced and secured according to the manual. This provides mattress support.
  5. Assemble and Insert Drawers: Assemble the four under-bed storage drawers. Ensure the rollers are properly attached for smooth operation. Slide the assembled drawers into their designated positions under the bed frame.
  6. Final Tightening: Once all components are in place, go back and securely tighten all screws and bolts.
  7. Connect Power: Plug the power cord for the LED lights and charging station into a suitable wall outlet.

Refer to the detailed instruction manual included in your package for step-by-step diagrams and specific hardware usage.

Lifestyle image of the HOSTACK Full LED Bed Frame in a bedroom setting, showcasing the illuminated headboard and overall design.
Figure 2: The assembled HOSTACK Full LED Bed Frame with its illuminated headboard and under-bed storage drawers.

Operating Instructions

LED Headboard Lights:

The headboard features integrated LED lights. These lights can be controlled to customize your preferred color or atmosphere. The control mechanism (button or remote) is typically located on the headboard itself or via an attached cable. Refer to the specific instructions for the LED light controller for detailed operation.

Detailed view of the headboard, emphasizing the built-in charging station with USB ports and the LED light strip.
Figure 3: Close-up of the headboard showing the LED light strip and the integrated charging station with USB-A and USB-C ports.

Charging Station:

The headboard includes a built-in charging station with USB-A and USB-C ports. To use, ensure the bed frame is plugged into a power outlet. Simply connect your electronic devices to the appropriate USB port for charging.

Under-Bed Storage Drawers:

The four under-bed drawers provide convenient storage. Each drawer is equipped with rollers for smooth opening and closing. To access, gently pull the drawer handle. To close, push the drawer back until it is fully recessed under the bed.

Image showing the bed frame with one of the four under-bed drawers fully extended, revealing its storage capacity.
Figure 4: One of the four under-bed storage drawers fully extended, demonstrating its capacity for organizing items.

Maintenance

  • Cleaning: For the velvet upholstery, gently vacuum with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For tougher stains, use a mild upholstery cleaner according to its instructions, testing on an inconspicuous area first.
  • Frame Care: Wipe the metal and wood components with a damp cloth and mild detergent if necessary. Dry immediately.
  • Hardware Check: Periodically (e.g., every 3-6 months) check all screws, bolts, and connections to ensure they are tight. Retighten as needed to maintain stability and prevent noise.
  • Drawer Maintenance: Keep the drawer rollers free of dust and debris for smooth operation.
  • Electrical Components: Ensure the power cord and charging station are free from damage. Do not expose to moisture.

Troubleshooting

ProblemPossible CauseSolution
Bed frame is wobbly or noisy.Loose hardware connections.Check and tighten all screws and bolts on the frame, headboard, and slats.
LED lights are not working.Power cord unplugged, faulty connection, or LED controller issue.Ensure the power cord is securely plugged into a working outlet. Check all connections to the LED strip and controller. If issues persist, contact customer support.
Charging station (USB ports) not working.Bed frame not powered, device cable faulty, or port damage.Verify the bed frame is plugged in. Try a different USB cable or device. Inspect ports for visible damage.
Drawers are difficult to open/close.Debris in rollers, misaligned, or overloaded.Clean any debris from the drawer rollers. Ensure drawers are not overloaded. Check if drawers are properly aligned on their tracks.

Specifications

FeatureDetail
BrandHOSTACK
ModelFull LED Bed Frame with Storage Headboard and Charging Station
MaterialHighgrade Velvet, Wood, Metal
Finish TypeVelvet
Color OptionsCream, Pink
Product Dimensions (Overall)84.6 inches (L) x 55.9 inches (W) x 44.5 inches (H)
Headboard Height44.5 inches
Bed Surface FabricComposite Fabrics
Mattress Size CompatibilityFull size, 10-12 inches thickness (No Box Spring Required)
Maximum Weight Capacity800 Pounds (approx. 363 kg)
Storage4 Under-Bed Drawers
Drawer Interior Dimensions29.5 inches (L) x 20.5 inches (W) x 5.1 inches (H)
Special FeaturesLED Lights, Charging Station (USB-A & USB-C ports)
Installation MethodAssembly
Approximate Assembly Time40 minutes (2 people recommended)

User Tips

  • For optimal LED light effect, consider placing the bed against a light-colored wall.
  • Utilize the headboard shelf for small, frequently used items like phones, books, or decorative pieces.
  • Organize items in the under-bed drawers using dividers or smaller bins to maximize space and keep contents tidy.
  • When assembling, ensure all parts are oriented correctly before tightening to avoid re-assembly.

Warranty and Support

HOSTACK products are manufactured with quality and durability in mind. For any questions regarding assembly, missing parts, or product functionality, please contact our customer support team. Keep your purchase receipt as proof of purchase for any warranty claims.

Please refer to the contact information provided with your purchase documentation for customer service details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.