UGREEN BT303

Contents

UGREEN Bluetooth 5.4 Audio Transmitter & Receiver

Model: BT303

2-in-1 Wireless Audio Solution for Home and Car

Introduction

The UGREEN Bluetooth 5.4 Audio Transmitter & Receiver (Model BT303) is a versatile 2-in-1 wireless audio adapter designed to enhance your audio experience. It allows you to effortlessly switch between transmitting audio from non-Bluetooth devices to Bluetooth headphones/speakers, or receiving audio from Bluetooth-enabled devices to wired speakers/car stereos. Featuring Bluetooth 5.4 technology, an intuitive OLED display, and a built-in microphone, this device offers stable, low-latency, and clear sound transmission for various applications.

Product Overview

Familiarize yourself with the components of your UGREEN Bluetooth adapter.

Diagram showing the UGREEN Bluetooth adapter with labels for its components: 3.5mm Audio Connector, Microphone Slide Switch, USB-A Connector (for power supply), Function Buttons, Coiled Cable, and Display Screen.

Figure 1: Product Components and Display Screen Details

Components:

  • 3.5mm Audio Connector: For audio input/output.
  • Microphone Slide Switch: To enable/disable the built-in microphone.
  • USB-A Connector: Provides power to the device.
  • Function Buttons: Control volume, track selection, pairing, play/pause, and call management.
  • Coiled Cable: Flexible cable connecting the main unit to the USB-A connector.
  • Display Screen: OLED display for visual operation and status indication.

Display Screen Information:

  • Mode: Indicates current mode (TX for Transmitter, RX for Receiver).
  • Codecs: Shows the active audio codec (SBC, AAC).
  • Volume Level: Displays the current audio volume.
  • Bluetooth Name: Shows the device's Bluetooth name (e.g., UGREEN-BT303).
  • Connected Devices: Lists currently connected Bluetooth devices (e.g., 'A: Bluetooth device A', 'B: Bluetooth device B').

Specifications

FeatureSpecification
Brand NameUGREEN
ModelBT303
Wireless TypeBluetooth
Bluetooth StandardCompatible Bluetooth v5.4
Interface3.5 MM Audio Jack, USB-A (for power)
Audio CodecsSBC, AAC
Transmission DistanceUp to 10 meters (barrier-free linear transmission)
DisplayOLED Display
MicrophoneBuilt-in mic for hands-free calling
Cable Length0.5m - 1.5m (Spring Compression Line)
Package Dimensions (L x W x H)15 cm x 10 cm x 3 cm
Package Weight0.097 kg

Setup

Follow these steps to set up your UGREEN Bluetooth adapter.

1. Powering the Device

  1. Connect the USB-A connector of the adapter to a USB power source (e.g., car USB port, USB wall adapter, computer USB port).
  2. The OLED display will light up, indicating the device is powered on.

2. Selecting Operating Mode (TX/RX)

The device features a one-key switch to toggle between Transmitter (TX) and Receiver (RX) modes.

Image showing the TX/RX slide switch on the UGREEN Bluetooth adapter.

Figure 2: TX/RX Mode Switch

  • TX Mode (Transmitter): Use this mode to send audio from a non-Bluetooth device (e.g., TV, computer, MP3 player) to Bluetooth headphones or speakers.
  • RX Mode (Receiver): Use this mode to receive audio from a Bluetooth-enabled device (e.g., smartphone, tablet, laptop) and play it through wired speakers, car stereos, or wired headphones.

Slide the switch to your desired mode (TX or RX). The OLED display will show the selected mode.

3. Connecting Audio Source/Output

  1. In TX Mode: Connect the 3.5mm audio connector of the adapter to the audio output jack of your non-Bluetooth device (e.g., TV headphone jack, computer audio out).
  2. In RX Mode: Connect the 3.5mm audio connector of the adapter to the audio input jack of your wired audio system (e.g., car AUX input, wired speaker input, wired headphone jack).

Operating Instructions

Transmitter Mode (TX)

In TX mode, the adapter sends audio from a non-Bluetooth device to a Bluetooth receiving device.

Diagram illustrating TX mode compatibility: Switch, MP3/MP4, PS4, PC, TV connected to the adapter, which then transmits to Bluetooth Earphone, Bluetooth Headphone, or Bluetooth Speaker.

Figure 3: Transmitter Mode (TX) Compatibility

  1. Ensure the adapter is in TX mode (OLED display shows 'TX').
  2. Connect the 3.5mm audio connector to the audio output of your source device (e.g., TV, computer).
  3. Put your Bluetooth headphones or speaker into pairing mode.
  4. The adapter will automatically search for nearby Bluetooth devices. The OLED display will show 'Pairing...' and list found devices.
  5. Select your desired device from the list on the adapter's display (if multiple are found) or wait for automatic connection.
  6. Once connected, audio from your source device will play through your Bluetooth headphones/speaker.
A person watching TV with Bluetooth earphones connected via the UGREEN adapter in Transmitter Mode.

Figure 4: Watching TV with Bluetooth Earphones in TX Mode

Receiver Mode (RX)

In RX mode, the adapter receives audio from a Bluetooth-enabled device and plays it through a wired audio system.

Diagram illustrating RX mode compatibility: Smart Phone, Tablet, Laptop connected via Bluetooth to the adapter, which then outputs to Wired Speaker, Wired Earphone, or Car stereo.

Figure 5: Receiver Mode (RX) Compatibility

  1. Ensure the adapter is in RX mode (OLED display shows 'RX').
  2. Connect the 3.5mm audio connector to the AUX input of your wired speaker, car stereo, or wired headphones.
  3. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to Bluetooth settings and search for 'UGREEN-BT303' (or similar name shown on the adapter's display).
  4. Select 'UGREEN-BT303' to pair and connect.
  5. Once connected, audio from your Bluetooth device will play through your wired audio system.
A smartphone playing music connected to the UGREEN adapter in a car's center console, demonstrating Receiver Mode for in-car audio.

Figure 6: Enjoying Music in Car via RX Mode

Hands-free Calling & Navigation (RX Mode)

When in RX mode and connected to a smartphone, the built-in microphone allows for hands-free calls and navigation voice prompts.

A person driving a car, receiving a call on their phone which is connected to the UGREEN adapter for hands-free communication.

Figure 7: Hands-free Calling and Navigation

  • Ensure the Microphone Slide Switch is enabled.
  • Use the multi-function button (center button) to answer/end/reject calls.

Button Functions

The adapter features easy-to-use buttons for controlling various functions.

Diagram showing the button layout: Top button for Volume Up/Previous Song, Middle button for Pair/Play/Pause/Answer/End/Reject call, Bottom button for Volume Down/Next Song.

Figure 8: Button Functions

  • Volume Up / Previous Song: Short press for Volume Up, Long press for Previous Song.
  • Volume Down / Next Song: Short press for Volume Down, Long press for Next Song.
  • Multi-function Button (Center):
    • Short press: Play/Pause music.
    • Short press: Answer/End a call.
    • Long press: Reject a call.
    • Long press (in pairing mode): Initiate pairing.

Dual Pairing

The adapter supports connecting to two Bluetooth devices simultaneously in both Transmitter and Receiver modes.

Image showing the UGREEN adapter connected to a speaker and a power source, with a person holding a smartphone, illustrating one-to-two pairing.

Figure 9: One-to-Two Pairing Example

To use dual pairing:

  1. Connect the first device as described above.
  2. Put the second device into pairing mode.
  3. On the adapter (or your source device in RX mode), initiate pairing again. The adapter will search for and connect to the second device.
  4. The OLED display will show both connected devices (e.g., 'A: Bluetooth device A', 'B: Bluetooth device B').

Maintenance

To ensure the longevity and optimal performance of your UGREEN Bluetooth adapter, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the device. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the device or subjecting it to strong impacts. Do not bend or pull the coiled cable excessively.
  • Power: Always use a stable USB power source. Avoid using damaged cables or chargers.

Troubleshooting

If you encounter issues with your UGREEN Bluetooth adapter, refer to the following common problems and solutions:

  • No Power/Display Off:
    • Ensure the USB-A connector is securely plugged into a working USB power source.
    • Try a different USB port or power adapter.
    • Check if the power source is providing sufficient power.
  • Cannot Pair with Device:
    • Ensure the adapter is in the correct mode (TX for transmitting, RX for receiving).
    • Place the adapter and the target Bluetooth device close to each other (within 1 meter).
    • Put the target Bluetooth device into pairing mode.
    • Restart both the adapter and the target Bluetooth device.
    • Clear previous Bluetooth connections on the target device if necessary.
  • No Sound or Low Volume:
    • Check if the 3.5mm audio cable is securely connected to both the adapter and the audio source/output device.
    • Ensure the volume on both the adapter and the connected audio device is turned up.
    • Verify that the correct audio input/output is selected on your source/output device.
    • Check the OLED display for the current volume level and codec.
  • Poor Audio Quality or Disconnections:
    • Ensure there are no physical obstructions (walls, large objects) between the adapter and the connected Bluetooth device.
    • Keep the devices within the 10-meter transmission range.
    • Avoid strong electromagnetic interference from other electronic devices.
    • If using dual pairing, temporarily disconnect one device to see if performance improves.
  • Microphone Not Working (RX Mode):
    • Ensure the Microphone Slide Switch on the adapter is in the 'on' position.
    • Check your smartphone's audio input settings to ensure the adapter is selected as the microphone source.

User Tips

  • Optimal Placement: For the best signal stability and range, try to place the adapter in an open area with minimal obstructions, especially when using it in a car or home stereo setup.
  • Power Source Quality: Using a stable and sufficient power source (e.g., a dedicated USB charger rather than a low-power USB port on an older device) can prevent unexpected disconnections or performance issues.
  • Codec Awareness: The OLED display shows the active audio codec (SBC/AAC). While AAC generally offers better quality, ensure your connected device also supports it for optimal performance.
  • Car Use: When using in a car, ensure the 3.5mm AUX input is selected on your car stereo for audio playback. The built-in mic is great for calls, but be mindful of road noise.
  • Firmware Updates: Periodically check the UGREEN official website for any potential firmware updates for your model, which can improve performance and compatibility.

Warranty and Support

UGREEN products are designed and manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.