1. Introduction
This manual provides detailed instructions for the safe and effective use of your DEUKIO Remote Control for GPS Fishing Bait Boats. This remote control is designed to wirelessly navigate compatible fishing bait boats, specifically models D18B, D16B, D18E, and D16E.

Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage.
2. Product Overview
The remote control features a robust design with intuitive controls and an LCD screen for real-time information. Familiarize yourself with the components shown below.

- Antenna: For 2.4G signal transmission.
- A Button / B Button: Auxiliary function buttons.
- Left Motor Control / Right Motor Control: Joysticks for boat propulsion and steering.
- ON/OFF Switch: Power switch for the remote control.
- Indication Light: Status indicator.
- Spare Button: Unassigned button for potential future functions.
- Left Bait Container Release Button: Releases bait from the left container.
- Right Bait Container Release Button: Releases bait from the right container.
- GPS Positioning Button: Activates GPS positioning functions.
- Night Light Control: Controls the boat's night lights.
- OK Button: Confirmation button for menu selections.
- Back Bait Container Release Button: Releases bait from the rear container.

The LCD screen provides critical operational data:
- Boat Battery Power: Displays the current battery level of the bait boat.
- Compass: Indicates the boat's heading.
- GPS: Shows GPS signal status.
- Light: Indicates the status of the boat's lights.
- Positioning Point 1-4: Allows setting and recalling up to four GPS positioning points.
- Distance: Shows the distance of the boat from the remote control.
- Boat Direction: Visual representation of the boat's orientation.
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Remote Control for GPS Fishing Bait Boat |
| Model | TT-Y27870 |
| Compatible Boat Models | D18B, D16B, D18E, D16E |
| Material | Plastic |
| Remote Range | Up to 400-500 meters |
| Power Source | 4 AA batteries (not included) |
| Dimensions (Remote) | 15.5 cm (W) x 16.5 cm (H) / 6.1 in (W) x 6.5 in (H) |
| Package Dimensions | Approx. 17 cm (L) x 17 cm (W) x 7 cm (H) / 6.7 in x 6.7 in x 2.8 in |
| Package Weight | Approx. 250g / 8.8oz |

4. Setup
4.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover.
- Insert 4 AA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Initial Pairing with Bait Boat
To establish a connection between the remote control and your bait boat, follow these steps:
- Ensure both the remote control and the bait boat are turned OFF.
- Press and hold the GPS Positioning Button (red circle button on the remote).
- While holding the GPS Positioning Button, turn ON the remote control.
- Continue holding the GPS Positioning Button and then turn ON the bait boat.
- Keep pressing the button until the boat's lights turn on, then release the button.
- The remote control and boat should now be paired.

5. Operating Instructions
5.1 Basic Navigation
- Use the Left Motor Control joystick to control the left motor's speed and direction.
- Use the Right Motor Control joystick to control the right motor's speed and direction.
- Combine both joysticks for forward, backward, turning, and pivoting movements.
5.2 Bait Release
- Press the Left Bait Container Release Button to open the left bait compartment.
- Press the Right Bait Container Release Button to open the right bait compartment.
- Press the Back Bait Container Release Button to open the rear bait compartment.
5.3 GPS Functions
- Press the GPS Positioning Button to activate GPS functions.
- Use the directional pad and OK Button to set and recall up to 4 positioning points. Refer to the boat's specific manual for detailed GPS operation.
5.4 Night Light Control
- Use the Night Light Control switch to turn the boat's navigation lights ON or OFF for visibility in low-light conditions.
6. Maintenance
6.1 Cleaning
- Wipe the remote control with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Avoid exposing the remote to excessive moisture.
6.2 Battery Care
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Replace all 4 AA batteries at the same time; do not mix old and new batteries.
6.3 Storage
- Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
7.1 Remote Control Not Powering On
- Check if the batteries are inserted correctly with the right polarity.
- Ensure the batteries are fresh and fully charged.
- Verify the ON/OFF switch is in the 'ON' position.
7.2 Remote Control Not Pairing with Boat
- Re-attempt the pairing process as described in Section 4.2.
- Ensure both the remote and boat are fully charged or have fresh batteries.
- Verify that the remote control is compatible with your specific bait boat model (D18B, D16B, D18E, D16E).
7.3 Poor Signal or Limited Range
- Ensure there are no obstructions between the remote control and the boat.
- Check for potential interference from other 2.4Ghz devices.
- Verify the remote control's batteries are not low.
8. User Tips
- Pairing Process: Several users have found the specific pairing sequence (holding the GPS button while powering on both devices) to be crucial for successful connection. If you encounter issues, repeat this process carefully.
- Battery Life: Always carry spare AA batteries for the remote control, especially during longer fishing trips, as they are not included with the product.
- Compatibility Check: Before purchasing or attempting to pair, confirm that your bait boat model (e.g., V60, V050) is indeed compatible with the D18B/D16B/D18E/D16E series remote control.
- No Instructions: If you find the included instructions insufficient, refer to this manual or search for specific pairing videos online for your boat model.
9. Warranty and Support
For any issues not covered in this manual, or for warranty claims, please contact the manufacturer or your seller directly. Keep your purchase receipt as proof of purchase.
Manufacturer Information:
- Company Name: Shenzhen Hex Blue Technology Co., Ltd.
- Full Address: Building 2, Hive Technology and Innovation Factory, No. 60 Zhanhui Road, Xitian Community, Gongming Street, Guangming District
- Email: 556937542@qq.com
- Telephone: 86-19926840401
EU Authorized Representative:
- Company Name: Nenninger GmbH
- Full Address: Friedrichstr. 95, 10117 Berlin, Germany
- Email: nenningerde@gmail.com
- Telephone: 49-12345678910
10. Safety Information
WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.