1. Introduction
The UGREEN Smarttrack K Smart Tag is a compact and efficient item tracker designed to help you locate your belongings using Apple's extensive Find My network. Compatible with iPhone, iPad, and Mac devices running iOS 14.5, iPadOS 14.5, macOS 11, and above, this Smart Tag offers global positioning, accuracy, and security features to ensure you never lose track of your important items.
Important Note: This Smart Tag is exclusively designed for use with Apple devices and does not support Android devices. Connection is established via Bluetooth to report its location through the Apple Find My network.

Image: UGREEN Smart Tag 4-Pack, highlighting compatibility with Apple Find My.
2. Package Contents
Please check the package for the following items:
- UGREEN Smarttrack K Smart Tag(s)
- Keychain Protector(s)
- CR2032 Battery (pre-installed or included for each tag)
- User Manual (this document)

Image: UGREEN Smart Tag retail box.
3. Setup Guide
3.1 Battery Installation/Replacement
The UGREEN Smart Tag is powered by a CR2032 coin cell battery, offering approximately 1 year of standby time. Follow these steps to install or replace the battery:
- Step 1: Turn the Smart Tag counterclockwise to open its casing.
- Step 2: Insert the CR2032 battery with the positive (+) polarity facing up.
- Step 3: Turn the Smart Tag clockwise to securely close the casing.

Image: Instructions for battery replacement.
3.2 Connecting to Apple Find My
To connect your UGREEN Smart Tag to your Apple device:
- Step 1: Open the pre-installed 'Find My' app on your iPhone, iPad, or Mac.
- Step 2: Navigate to the 'Items' tab and tap 'Add Item'.
- Step 3: Select 'Add Other Supported Item'.
- Step 4: The app will detect your Smart Tag. Tap 'Connect' to pair it with your device.

Image: Visual guide for connecting the Smart Tag to the Find My app.
3.3 Attaching the Smart Tag
Use the included keychain protector to easily attach your Smart Tag to keys, bags, wallets, or other items you wish to track.

Image: UGREEN Smart Tag with keychain protector attached to items.
4. Operating Instructions
4.1 Locating Your Items
Once connected, you can locate your items using the 'Find My' app. The app will display the last known location of your Smart Tag on a map, leveraging Apple's global network for accurate positioning.

Image: iPhone displaying the Find My app with a UGREEN Smart Tag's location.
4.2 Buzzer Alert Function
If your Smart Tag is within Bluetooth range, you can make it play a sound to help you find it. In the 'Find My' app, tap 'Find' to activate the buzzer. The Smart Tag will emit 12 beeps, guiding you to its location.

Image: UGREEN Smart Tag with sound wave icon, illustrating the buzzer alert.
4.3 Left Behind Alert
Receive instant notifications on your Apple device if you leave your tracked items behind. This feature helps prevent loss by alerting you when your Smart Tag moves too far away from your device.

Image: iPhone notification for a 'Left Behind Alert'.
4.4 Anti-tracking Function
The UGREEN Smart Tag includes an anti-tracking feature. If an unknown Smart Tag is detected traveling with you over time, your Apple device will notify you, helping to prevent unwanted tracking.

Image: iPhone displaying an 'AirTag Detected Near You' notification.
5. Maintenance
5.1 Battery Replacement
As detailed in Section 3.1, the CR2032 battery can be easily replaced when depleted. A low battery notification will typically appear on your connected Apple device.

Image: UGREEN Smart Tag and CR2032 battery.
5.2 Cleaning
Wipe the Smart Tag with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the device.
6. Troubleshooting
- Smart Tag not connecting to Find My app: Ensure your Apple device is running iOS 14.5, iPadOS 14.5, or macOS 11 or later. Check if Bluetooth is enabled on your device. Try resetting the Smart Tag by removing and reinserting the battery.
- Buzzer not sounding: Ensure the Smart Tag is within Bluetooth range of your Apple device. Check the battery level in the Find My app.
- Inaccurate location: The accuracy of the location depends on the density of Apple devices in the vicinity. In areas with fewer Apple devices, location updates might be less frequent or precise.
- Battery draining quickly: Ensure the battery is correctly installed. If the issue persists, replace the battery with a new CR2032.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Code | CM520 |
| Model Name | UGREEN Smart Tag |
| Bluetooth® Version | 5.2 |
| Bluetooth Protocol | BLE |
| Battery Type | CR2032 |
| System Requirements | iOS 14.5, iPadOS 14.5, macOS 11 and above |
| Compatible Devices | iPhone, iPad, Mac |
| Applications | Apple's built-in 'Find My' App |
| Product Positioning Range | Global Positioning (GPS) |
| Operating Frequency | 2.400GHz-2.4835GHz |
| Frequency Response | 20Hz-20KHz |
| Material | Body shell/Middle frame: PC+ABS, Bottom Case: Stainless Steel |
| Warranty | 1 year |
| Package | UGREEN Retail Box |

Image: Detailed product specifications and dimensions.
8. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. However, general tips for using item trackers include:
- Regularly check the battery status in the Find My app to ensure continuous tracking.
- Attach the Smart Tag securely to items to prevent accidental detachment.
- Familiarize yourself with the Find My app's features, such as marking an item as lost, to maximize the utility of your Smart Tag.
9. Warranty & Support
The UGREEN Smarttrack K Smart Tag comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please contact UGREEN customer service through their official website or the retailer where you purchased the product.