IKuaios BKHD-1264-6-Bay-NAS

Contents

IKuaios BKHD-1264-6-Bay-NAS Server Instruction Manual

Model: BKHD-1264-6-Bay-NAS

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your IKuaios BKHD-1264-6-Bay-NAS Server. This powerful network-attached storage device supports Docker, 2.5" and 3.5" SATA hard disks, features an Intel N100 processor, 8GB RAM, 256GB SSD, and four 2.5GbE network ports, making it ideal for various data storage and network applications.

Front and rear view of the IKuaios 6-Bay NAS Server
Figure 1: IKuaios 6-Bay NAS Server - Front and Rear Views

Setup Guide

1. Unpacking and Inspection

Carefully remove the NAS server from its packaging. Inspect all components for any signs of damage. Ensure all accessories, including the power adapter and any included cables, are present.

2. Hard Disk Installation

The NAS supports up to six 2.5" or 3.5" SATA hard disks. Follow these steps to install your drives:

  1. Locate the six front-loading drive bays.
  2. Gently pull the latch on each drive tray to release and remove it from the bay.
  3. Mount your 2.5" or 3.5" SATA hard disk onto the drive tray using the provided screws. Ensure the connectors align correctly.
  4. Slide the loaded drive tray back into the NAS bay until it clicks securely into place.
  5. Repeat for all desired hard disks.
Front view of the NAS server showing six drive bays
Figure 2: Front View with Drive Bays

3. Connecting Peripherals

  • Power: Connect the DC 12V power adapter to the power input port on the rear of the NAS, then plug it into a power outlet.
  • Network: Connect one or more Ethernet cables from the NAS's 2.5GbE RJ45 ports to your network router or switch.
  • Display (Optional): If initial setup or troubleshooting requires a display, connect a monitor to the DP or HD port.
  • USB Devices (Optional): Connect USB keyboards, mice, or external storage devices to the available USB ports.
Rear view of the NAS server showing power, network, and display ports
Figure 3: Rear View with Connectivity Ports

4. Initial Power On

Press the power button on the front panel to turn on the NAS server. The system will begin its boot sequence.

Operating Instructions

1. Operating System Installation

The NAS server supports various x86-64 operating systems. Common choices include dedicated NAS operating systems like TrueNAS, OpenMediaVault, or general-purpose operating systems such as Windows Server, Windows 10/11, or Linux distributions. You can install the OS via USB boot drive or network boot (PXE).

2. Network Configuration

The device features four Intel i226 2.5Gigabit Ethernet ports. After OS installation, configure your network settings to ensure proper connectivity and access to the NAS over your local network. For Windows 10/11/Server, you may need to manually add the 2.5G NIC driver. This driver can be obtained from the official BKIPC website: www.bkipc.com/en/new/NIC-driver.html.

3. BIOS Settings and Advanced Features

Access the AMI EFI BIOS (UEFI boot only) during startup to configure advanced settings. Key features include:

  • Power-on boot: Configure the system to automatically power on when power is restored.
  • Scheduled boot: Set specific times for the NAS to power on.
  • Wake-up on LAN (WoL): Enable the NAS to be woken up remotely over the network.
  • PXE boot: Network boot functionality for OS installation.
  • Watchdog: A hardware or software timer that triggers a system reset if the operating system fails to respond within a preset time.

4. Docker Support

The NAS server is designed to support Docker, allowing you to deploy and manage containerized applications efficiently. Refer to your chosen operating system's documentation and Docker's official guides for installation and usage instructions.

Maintenance

1. General Care

  • Keep the NAS in a well-ventilated area to prevent overheating.
  • Ensure the environment is free from excessive dust and moisture.
  • Clean the exterior with a soft, dry cloth. Avoid liquid cleaners.

2. Software Updates

Regularly update your operating system and any installed software (e.g., NAS software, Docker) to ensure optimal performance, security, and access to the latest features.

3. Hardware Upgrades

The NAS supports memory and storage upgrades:

  • Memory: The single DDR5 SO-DIMM slot supports up to 16GB 4800MT/s RAM.
  • Storage: In addition to the six SATA bays, there are two M.2 Key-M 2280 SSD slots (PCIe x1/SATA) for faster storage options, and one additional SATA 6Gb/s port.
  • Expansion: A PCIe x1 Gen3 expansion slot is available for additional functionality.
Internal view of the NAS server showing motherboard and components
Figure 4: Internal Components for Upgrades

Troubleshooting

Common Issues and Solutions:

  • No Power:
    • Ensure the power adapter is securely connected to both the NAS and a working power outlet.
    • Verify the power outlet is functional.
  • No Network Connectivity:
    • Check Ethernet cable connections to the NAS and your router/switch.
    • Verify network settings within your operating system.
    • If using Windows, ensure the 2.5G NIC driver is correctly installed (refer to Operating Instructions).
  • Hard Drives Not Detected:
    • Ensure hard drives are properly seated in their trays and the trays are fully inserted into the bays.
    • Check SATA cable connections if you have opened the chassis.
    • Verify drive health and formatting within your operating system.
  • System Instability/Crashes:
    • Check for adequate ventilation to prevent overheating.
    • Ensure RAM modules are correctly seated.
    • Update your operating system and drivers to the latest versions.
  • Operating System Driver Issues:
    • Some systems may not provide driver adaptation for network cards or processors. Contact support if you encounter persistent driver issues after checking official OS documentation.

Specifications

Below are the detailed technical specifications for the IKuaios BKHD-1264-6-Bay-NAS Server:

Image listing key specifications: CPU, Memory, Storage, Network Controller, SATA Controller, Expansion slot
Figure 5: Key Hardware Specifications
FeatureDetail
Model Number6-BAY-N100-NAS-8GR256GS
ProcessorIntel N100 (4C/4T, 2.0 GHz)
Processor TypeFCBGA1264
ChipsetBKHD-1264-NAS-MB
BIOSAMI EFI BIOS (UEFI boot only)
RAM TypeDDR5
Memory Slot1x DDR5 SO-DIMM, Up to 16GB 4800MT/s
Storage Slot2x M.2 Key-M 2280 SSD (PCIe x1/SATA); 1x SATA 6Gb/s
HDD Capacity (Pre-installed)256GB NVMe SSD (if configured)
Interface TypeSATA
SATA ControllerJMB585 PCIe to 5xSATA
SATA Ports6x SATA 6Gb/s
Network Controller4x Intel i226 2.5GbE
Network Ports4x RJ45
Display Port1x DP port; 1x HD port
Display ChipIntegrated Intel UHD Graphics
Expansion Slot1x PCIe x1 Gen3
Other FunctionsPower-on boot; Scheduled boot; Wake-up on LAN; PXE boot; Watchdog
Power SupplyDC 12V 4A or more
TypeTower
CertificationCE, FCC, RoHS, WEEE

Dimensions:

Diagram showing NAS dimensions: 250mm width, 210mm height, 260mm depth
Figure 6: NAS Server Dimensions (Width x Height x Depth)
  • Width: 250mm
  • Height: 210mm
  • Depth: 260mm

Warranty and Support

1. Warranty Period

We provide a standard warranty period of 1 year for free repair or replacement. For certain vulnerable parts, discounted prices are available for replacement. Please refer to our official warranty policy for full details.

2. Customer Support

For technical assistance, inquiries, or support regarding your NAS server, please contact our customer service team. We are committed to providing high-quality pre-sales service and after-sales support.

Contact Information:

  • Website: www.bkipc.com
  • Email: marhone@bkipc.com
  • Skype: marhone@bkipc.com
  • Wechat: +86 18019128920
  • WhatsApp: (Refer to QR code on contact image for direct access)
Contact information including website, email, Skype, Wechat, and WhatsApp QR codes
Figure 7: Support Contact Information

3. Customization Services

We offer various customization options for your product:

  • LOGO Laser: Free LOGO laser engraving (requires chassis support).
  • Body/Panel Customization: Add your logo to the body or panel. Contact us with your logo file for a preview.
  • Color/Appearance Customization: Change the color or appearance of the machine. Discuss details, production cycles, and schedule with our business manager.
  • BIOS Customization: Change the BIOS interface when the machine starts. Contact our business manager for customized patterns and cycles.
  • OEM/ODM: For OEM production or custom configurations, chassis, BIOS files, packaging, and pre-installed systems, please contact our business personnel.
Examples of customization options: logo, color, BIOS, OEM
Figure 8: Customization Options

4. Certifications

Our products adhere to international quality and safety standards, including CE, FCC, RoHS, and WEEE certifications.

Certifications including CE, FCC, RoHS, and WEEE
Figure 9: Product Certifications

User Tips

  • Driver Management: For optimal network performance, especially with Windows operating systems, remember to manually install the 2.5G NIC drivers if not automatically detected. The official BKIPC website is a reliable source.
  • BIOS Access: Familiarize yourself with BIOS settings for features like Wake-on-LAN and scheduled power-on, which can enhance the convenience and energy efficiency of your NAS.
  • Community Resources: Consider following official media accounts or forums related to NAS and mini-PC communities for additional tips, software configurations, and troubleshooting advice.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.