COOLMOON TY 240 Digital Display

Contents

COOLMOON TY 240 Digital Display Liquid Cooler User Manual

Model: TY 240 Digital Display | Brand: COOLMOON

1. Introduction

The COOLMOON TY 240 Digital Display Liquid Cooler is an advanced all-in-one (AIO) CPU cooling solution designed for high-performance computing. It features a newly designed pump with an infinite lens cold head and a copper bottom for efficient heat transfer, along with a real-time CPU temperature display. The cooler is equipped with internally and externally illuminated ARGB fans, offering customizable lighting effects. Its aerospace-grade sealing process ensures a liquid-free security barrier, preventing leakage and enhancing durability. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your liquid cooler.

COOLMOON TY 240 Digital Display AIO Liquid Cooler with RGB fans and pump display.

Figure 1: COOLMOON TY 240 Digital Display AIO Liquid Cooler (White Model)

2. Key Features

  • Digital Display Cold Head: Real-time CPU surface temperature display for immediate monitoring.
  • Multi-Platform Support: Compatible with a wide range of Intel (LGA1150, LGA 1156, LGA 1151, LGA1200, LGA 1700, LGA 2066, LGA 1366, LGA 1155, LGA 2011) and AMD (Socket AM2+, Socket FM2 / FM2 +, Socket AM3, Socket AM3 +, Socket AM2, Socket AM5, AM4) CPU sockets.
  • Aerospace-Grade Sealing: Advanced sealing process to prevent liquid leakage, ensuring reliability and safety.
  • 5V ARGB Lighting: Integrated Addressable RGB lighting for customizable visual effects, compatible with motherboard synchronization.
  • Intelligent Temperature Control: Fans and pump adjust speed based on CPU temperature for optimal cooling and quiet operation.
  • W-shaped Encrypted Fin Radiator: Optimized heat dissipation mesh for efficient and rapid cooling.
  • Hydraulic Bearings: Durable and quiet fan operation.
  • Teflon PTFE Dense Mesh Water Cooling Pipe: Anti-aging, corrosion-resistant, and low impedance pipes for long-term performance.
Key features of COOLMOON liquid cooler: digital display cold head, multi-platform support, no leakage, 5V ARGB, intelligent temperature control, infinite lens, hydraulic bearings, quiet operation, large air volume.

Figure 2: Overview of Key Features

3. Specifications

ComponentAttributeValue
RadiatorDimension (Cold Row Size)277 x 120 x 27 mm
MaterialAluminum alloy (fins), Copper (base)
TypeWater-cooled radiator
Weight2.1 KG (Product), 2.4 KG (Package)
Dimension (Package)368 x 229 x 143 mm
ColorBlack and White options
FanSize120 x 120 x 25 mm
Speed800-2000 RPM ±10%
Air Volume71.5 CFM (max)
Wind Pressure2.39 mmH2O (max)
Noise Value≤29 dBA (max)
Bearing TypeHydraulic bearing
Pump Water Cooling HeadSocket Type PlatformIntel: LGA115X / 1200 / 1366 / 17XX / 20XX; AMD: AM4 / AM3(+) / AM2(+) / FM2(+) / FM1
SizeΦ72 x 56 mm
Speed2600 RPM ±10%
Noise Value≤25 dBA (max)
Flowrate (Cold Liquid)≥1100 ml/min
GeneralRGB SupportA-RGB
Service Life60000h

*Note: Data and pictures involved on this details page may have errors in different environments and measurement methods. Please refer to the actual product.

Detailed specifications table for COOLMOON liquid cooler components.

Figure 3: Detailed Specifications

4. Package Contents

Upon opening the package, please verify that all the following components are included:

  • Water-cooled Radiator (1 unit)
  • Water-cooled Fans (2 units)
  • Intel/AMD Back Panel
  • Intel Buckle
  • 2066/2011 Buckles
  • AMD Fasteners
  • Cold Head Base Screws
  • Cold Row Screws
  • Fan Long Screws
  • Water Cooling Head Long Screws and Accessories
  • IC Start Line (for automatic color changing mode)
  • Thermal Grease
Multi-platform buckles and accessories for Intel and AMD CPU cooler installation.

Figure 4: Included Installation Accessories

5. Installation Guide

This section outlines the general installation steps. Specific motherboard and case configurations may vary. Always refer to your motherboard and case manuals for detailed instructions.

5.1 Prepare Your System

  1. Power off your computer and disconnect all cables.
  2. Open your computer case to access the motherboard and CPU area.
  3. Remove any existing CPU cooler. Clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.

5.2 Install the Radiator and Fans

  1. Attach the two 120mm fans to the radiator using the provided fan long screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
  2. Mount the assembled radiator and fans to an available 240mm fan mount in your computer case (e.g., top, front, or rear). Use the appropriate screws to secure it firmly.

5.3 Install the CPU Water Block

  1. For Intel Sockets: Attach the Intel back panel to the rear of your motherboard, aligning the holes. Then, secure the Intel buckle to the water block.
  2. For AMD Sockets: Attach the AMD fasteners to the water block.
  3. Apply a small amount of the provided thermal grease to the center of your CPU's integrated heat spreader (IHS).
  4. Carefully place the water block onto the CPU, ensuring even contact.
  5. Secure the water block to the motherboard using the cold head base screws and water cooling head long screws, tightening them in a cross pattern until snug. Do not overtighten.

5.4 Connect Cables

  1. Connect the pump's power cable to an available CPU_FAN or AIO_PUMP header on your motherboard.
  2. Connect the fan power cables to available fan headers on your motherboard.
  3. Connect the 5V ARGB cable from the water block and fans to a compatible 5V ARGB header on your motherboard. If your motherboard does not have a 5V ARGB header, use the provided IC Start Line for automatic color changing mode.
ARGB magic light synchronization experience with water-cooled 5V ARGB interface and motherboard 5V ARGB interface.

Figure 5: ARGB Connection Diagram

6. Operating Instructions

6.1 Power On and Initial Check

After installation, close your computer case, reconnect all peripherals, and power on your system. Observe the following:

  • The fans should spin, and the ARGB lighting on the fans and pump should illuminate.
  • The digital display on the pump head should show the CPU's surface temperature in real-time.
  • Check for any unusual noises or leaks.
Close-up of COOLMOON TY 240 pump with real-time CPU temperature display.

Figure 6: Real-time CPU Temperature Display

6.2 ARGB Lighting Control

The ARGB lighting can be controlled in two ways:

  • Motherboard Software Synchronization: If connected to a 5V ARGB header, you can use your motherboard's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects and synchronize them with other components.
  • Automatic Color Changing Mode: If using the IC Start Line, the lighting will cycle through various colors and effects automatically.

Video 1: Demonstration of ARGB Lighting Effects and Temperature Display

6.3 Temperature Monitoring

The digital display on the pump head provides a direct readout of your CPU's temperature. This allows for quick visual checks of your system's thermal performance. For more detailed monitoring and fan/pump speed control, refer to your motherboard's BIOS/UEFI settings or dedicated software.

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your liquid cooler.

  • Dust Cleaning: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Excessive dust can impede airflow and reduce cooling efficiency.
  • Tube Inspection: Visually inspect the water cooling pipes for any signs of wear, kinks, or leaks. The Teflon PTFE dense mesh pipes are designed for durability, but regular checks are recommended.
  • Fan Check: Ensure fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
  • Thermal Paste: While not frequently required for AIOs, if you ever remove the water block from the CPU, you must clean off the old thermal paste and apply new thermal paste before reinstallation.

8. Troubleshooting

8.1 No Power/Fans Not Spinning/No RGB

  • Check all power connections to the pump and fans. Ensure they are securely plugged into the correct headers on the motherboard.
  • Verify the 5V ARGB cable is correctly connected to a compatible header or the IC Start Line.
  • Check your motherboard's BIOS/UEFI settings to ensure fan headers are enabled and configured correctly.

8.2 High CPU Temperatures

  • Ensure the water block is making proper contact with the CPU. Re-seat the water block if necessary, applying new thermal paste.
  • Check for dust buildup on the radiator fins and clean if necessary.
  • Verify that the pump is running (you might hear a faint hum or feel vibrations in the tubes). If the pump is not running, check its power connection.
  • Ensure fans are spinning at appropriate speeds. Adjust fan curves in BIOS/UEFI or software if needed.
  • Confirm proper airflow within your computer case.

8.3 Leakage

  • Immediately power off your computer if you detect any liquid leakage.
  • Inspect all connections and tubing for the source of the leak.
  • Contact customer support if a leak is detected, as this may indicate a product defect.

9. Warranty and Support

The COOLMOON TY 240 Digital Display Liquid Cooler comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims. For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the official COOLMOON customer support channel.

Certifications: CE, FCC, RoHS, UL, KC, WEEE

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.