1. Introduction
This manual provides instructions for the installation, operation, and maintenance of the Sunster Diesel Heater Muffler. This accessory is designed to enhance your diesel heater system by reducing exhaust noise and ensuring efficient exhaust flow. It is compatible with most 2KW, 5KW, and 8KW diesel heaters.
1.1. Product Function
- Noise Reduction: Features a honeycomb structure and fireproof cotton for efficient noise reduction, providing a quieter heating experience.
- Consistent Exhaust Flow: Designed to maintain stable exhaust performance.
- Heat Management: Fireproof cotton wrapping helps reduce surface heat from the exhaust pipe.
- Durability: Constructed from high-grade aluminum alloy, offering strong weather endurance, heat tolerance, and corrosion resistance for long-term use.
2. Product Overview and Specifications
2.1. Components
The Sunster Diesel Heater Muffler package includes the following components:
- 1x Diesel Heater Muffler
- 2x Clamps
- 2x Self-Tapping Screws

Figure 1: Diesel Heater Muffler and included accessories.

Figure 2: Premium Aluminum Alloy construction for rust and corrosion resistance.
2.2. Specifications
| Feature | Specification |
|---|---|
| Product Type | Diesel Heater Muffler |
| Material | High-grade Aluminum Alloy |
| Compatibility | Most 2KW, 5KW, and 8KW Diesel Heaters |
| Inlet/Outlet Diameter | 0.94 inch (24 mm) |
| Length | 200 mm |
| Width | 103 mm |
| Noise Reduction | Honeycomb structure with fireproof cotton |

Figure 3: Muffler dimensions and leakage hole location.

Figure 4: Universal compatibility with various diesel heater types.
3. Installation
The muffler is installed as part of the exhaust system of your diesel heater. Ensure the heater itself is installed in a suitable location (e.g., passenger room, baggage room, or under the vehicle, avoiding splashing).
3.1. Exhaust System Connection
The muffler connects to the exhaust pipe of the diesel heater. The original manual (PDF page 4) illustrates a typical installation setup:
Figure 5: Installation details of a parking heater exhaust system (diagram from PDF page 4 of the original manual).
The exhaust pipe from the heater's combustion emission outlet should be connected to one end of the muffler. The other end of the muffler then leads to the final exhaust outlet. Use the provided clamps to secure the muffler to the exhaust pipes. The self-tapping screws can be used to fix the muffler to a stable surface if needed, ensuring it is securely mounted and free from vibrations. Ensure all connections are tight to prevent exhaust leaks.
4. Operating Instructions (for Diesel Heater System)
While the muffler is a passive component, its function is integral to the overall diesel heater system. The following instructions pertain to the general operation of compatible diesel heaters and their control units, as detailed in the original manual.
4.1. Heater Types
Compatible diesel heaters typically come in various configurations (refer to PDF page 4 of the original manual for visual examples):
- Horizontal All-in-One Heater
- Vertical All-in-One Heater
- Split Heater
4.2. Control Units (S-A2105L and S-A2302B)
The heater system is controlled via a switch controller and a remote control. Two common models are S-A2105L and S-A2302B (refer to PDF pages 5 and 8 of the original manual for images).
4.3. General Operating Instructions
- On/Off: Press the power button (usually marked with a circle and a line) to turn the heater on or off.
- Mode Switching: Press the 'M' button to switch between constant temperature mode and gear mode.
- Gear/Temperature Adjustment: Use the up/down buttons (or knob on some models) to adjust the heating gear (1-10) or target temperature (8-36°C).
- Time Setting: In the power-on state, long press the 'M' key for 3 seconds to enter time setting. Adjust current time, auto-start time, and running duration.
- Remote Control Matching: In the power-on state, long press the up button for 3 seconds until 'rte' appears. Then press any button on the remote control to match.
- Language Switching: In the power-on state, long press 'M' and up button simultaneously for 3 seconds to cycle through English, German, Russian, and Voice off.
- Oil Pumping Mode: In the shutdown state, long press the down button for 7 seconds to activate oil pumping. The display will show a 300-second countdown.
4.4. Bluetooth Remote Control Operation
The heater can be controlled via a mobile app ("AirHeaterBLE") available on iOS and Android.
- Download App: Scan the QR codes provided in the original manual (PDF page 5) or search "AirHeaterBLE" in your app store.
- Query Bluetooth Name: After powering on, press the power button and 'M' button simultaneously for 3 seconds. The screen will display a 4-character Bluetooth name (0-F).
- Connect via Bluetooth: On your mobile phone, click the Bluetooth symbol in the app, find the corresponding local Bluetooth number (e.g., BYD + MAC address + 4 digits from controller), and connect.
- App Operation: (Refer to PDF pages 7, 9, 10 of the original manual for app screenshots and visual guidance.)
- Long press the power button in the app to turn the heater on/off.
- Use the "mode" button to switch between gear mode and temperature control mode.
- Adjust levels/temperature using the "up +" / "down -" buttons.
- Access settings (language, password) via the settings button in the app.
5. Troubleshooting
If the heater system encounters a fault, an E-code will be displayed on the control unit. Refer to the table below for common E-codes and their solutions (as presented in PDF page 11 of the original manual).
| Error Code | Type of Fault | Solution |
|---|---|---|
| E01 | Supply Voltage Overrun | Check battery output voltage (9-16V for 12V heater, 18-30V for 24V heater). |
| E03 | Ignition Unit Fault | Check ignition plug connection; replace if disconnected or faulty. |
| E04 | Pulse Pump Fault | Check pulse pump plug connection; replace if disconnected or faulty. |
| E05 | Overheating | Check air inlet and outlet for blockages. |
| E06 | Fan Fault | Check fan plug connection; replace if disconnected or faulty. |
| E08 | Lack of Fuel | Check fuel tank for emptiness and refill. |
| E09 | Overheat Sensor Fault | Check sensor plug connection; replace if disconnected or faulty. |
| E10 | Startup Failure | Check fuel tank for emptiness and refill, or check fuel pipe for blockages. |
6. User Tips
Based on common user experiences, here are some tips for optimal use:
- Always ensure the muffler is securely fastened to the exhaust pipes to prevent leaks and maximize noise reduction.
- Regularly inspect the exhaust system for any blockages or damage, especially the muffler's inlet and outlet, to ensure proper function and prevent overheating.
- If experiencing persistent E-codes, double-check all wiring connections to the heater's components as per the main heater manual.
- For Bluetooth app issues, ensure your phone's operating system is up to date and try reinstalling the app if problems persist.
7. Support and Contact
For any questions or support regarding your Sunster Diesel Heater Muffler or compatible heater system, please contact us:
- Email: sunster202@163.com
- PDF User Manual: A comprehensive user manual for the Smart Heater system (which this muffler is an accessory for) is available in PDF format. You can view it here.