1. Introduction
The FURUI PM-Pro is a versatile smart card read and write device designed for duplicating and programming various RFID and NFC cards. It supports a wide range of frequencies and card types, making it suitable for various access control, identification, and security applications. This manual provides detailed instructions for setting up, operating, and maintaining your PM-Pro device.
Figure 1: FURUI PM-Pro RFID IC/ID Copier Duplicator
2. Package Contents
- 1 x PM-Pro RFID IC/ID Copier
- 1 x USB Cable (integrated or separate, depending on model variant)
3. Setup
Follow these steps to set up your FURUI PM-Pro device:
- **Connect to Computer**: Connect the PM-Pro device to your computer using the provided USB cable.
- **Software Installation**: The device requires a dedicated software application to function. This software is compatible with Windows XP, Windows 7, Windows 8, and Windows 10. Please ensure you have the necessary drivers and software installed. Typically, the software can be found on a mini-CD included with the product or downloaded from the manufacturer's support website.
- **Device Recognition**: Once connected and the software is installed, launch the application. The software should display a 'Connected' status and recognize the device (e.g., 'DeviceType: PM-Pro', 'DeviceNO: [Serial Number]').
Figure 2: PM-Pro connected via USB cable
4. Operating Instructions
The PM-Pro allows for reading, decoding, writing, and formatting of various IC and ID cards.
4.1. Reading a Card
- **Place Card**: Place the source IC or ID card on the corresponding 'IC READ WRITE' or 'ID READ WRITE' area of the device.
- **Select Frequency**: In the software interface, navigate to the 'LowFreqCard' tab for ID cards or 'HighFreqCard' tab for IC cards.
- **Initiate Read**: Click the 'Read' button in the software. The software will attempt to read the card data.
- **Decode Data**: If the card is encrypted, the software will attempt to decode it. The status will indicate 'IC card read successfully!' or 'IC card decoding is complete!' upon success. The decoded data will be displayed in the 'Decode block' section.
Figure 3: Software interface after successful IC card read
Figure 4: Software interface after successful IC card decoding
4.2. Writing to a Card
- **Prepare Data**: Ensure you have the desired card data (either read from a source card or imported from a file). Sector data can be edited directly within the software if needed.
- **Place Target Card**: Place a compatible blank or rewritable target card (e.g., T5577, EM4305, Mifare UID CUID FUID) on the appropriate 'IC READ WRITE' or 'ID READ WRITE' area of the device.
- **Initiate Write**: Click the 'Write' button in the software. The software will transfer the prepared data to the target card.
- **Format Card (Optional)**: If the target card needs to be cleared or prepared for new data, use the 'Format' function in the software.
Figure 5: Software interface showing write and format options
4.3. Advanced Features
- **Sector Data Editing**: The software allows for direct editing of sector data for advanced users.
- **Encryption Cracking**: The device is capable of cracking most card encryption, but success may vary depending on the card's security level.
- **Analog Phone NFC**: The device supports analog phone NFC functionality, allowing for interaction with NFC-enabled smartphones.
5. Maintenance
To ensure the longevity and optimal performance of your PM-Pro device:
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to open or repair the device yourself, as this will void the warranty and may cause damage.
- Store the device in a safe place when not in use.
6. Troubleshooting
- **Device Not Recognized**: Ensure the USB cable is securely connected to both the device and the computer. Verify that the necessary drivers are installed for your operating system. Try a different USB port or cable.
- **Read/Write Errors**: Ensure the card is placed correctly on the designated read/write area. Confirm that the card type is supported by the device for the intended operation (read or write). Some highly encrypted cards may not be fully crackable.
- **Software Issues**: If the software crashes or does not launch, try reinstalling it. Ensure your operating system is one of the supported versions (Windows XP, 7, 8, 10).
- **Inconsistent Results**: Ensure there are no other RFID/NFC devices or strong electromagnetic fields nearby that could interfere with the operation.
7. Specifications
| Feature | Specification |
|---|---|
| Model | PM-Pro |
| Supported Frequencies | 125KHz, 250KHz, 500KHz, 375KHz, 625KHz, 750KHz, 875KHz, 1000KHz, 13.56MHz (ISO1443A), H-ID |
| Card Reader Support | EM4100 / EM4200, Classic, UID, S50, S70 |
| Write Card Support | T5577, EM4305, Mifare UID CUID FUID |
| Supported Operating Systems | Windows XP, Windows 7, Windows 8, Windows 10 |
| Material | Plastic |
| Color | Black |
| Dimensions (L x W) | 9.5 cm / 3.74 inches x 6 cm / 2.36 inches |
Figure 6: Device dimensions
8. User Tips
- Always ensure the card is placed flat and centered on the read/write area for best results.
- When duplicating, always test the copied card on the intended system before relying on it.
- Keep your software updated to ensure compatibility with new card types and improved encryption cracking capabilities.
- For optimal performance, avoid running other resource-intensive applications while using the PM-Pro software.
9. Warranty and Support
For technical support, warranty claims, or further assistance, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information.
