1. Introduction
This manual provides detailed instructions for assembling and operating your RASTAR 1:8 F1 Red Bull RB19 Racing Formula Building Blocks Model. This highly detailed model, consisting of 2509 pieces, is designed for enthusiasts aged 14 and above, offering a realistic building experience and, for certain versions, remote control functionality.



2. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Recommended Age: 14+ years. Due to small parts, this product is not suitable for children under 3 years old.
- Keep small parts away from young children to prevent choking hazards.
- Do not ingest any parts of the model.
- Ensure proper ventilation if using any adhesives (not included, but generally good practice for models).
3. Package Contents
The package contains 2509 building block pieces made from odorless, soft ABS eco-friendly plastic. The specific contents may vary based on the version purchased (with or without motors, with or without original box).
3.1 Standard Version (No Motors, No Box)
- 2509 Building Block Pieces for the F1 Red Bull RB19 model.
- Paper Instruction Manual.
- Sticker Sheet for detailing (e.g., sponsor logos, car numbers 1 and 11).
3.2 RC Version (With Motors, With Box)
- 2509 Building Block Pieces for the F1 Red Bull RB19 model.
- Paper Instruction Manual.
- Sticker Sheet for detailing (e.g., sponsor logos, car numbers 1 and 11).
- 1 x 9V XL Extra Large Motor.
- 1 x Remote Control.
- 1 x 9V Servo Return Motor + Extension Cable.
- 1 x 2.4G Lithium Battery + Charging Cable.
- Original Product Box.

Note: Some versions may be shipped without the original outer packaging box to save shipping costs. Please verify all contents upon receipt.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | 92410 |
| Brand | RASTAR |
| Scale | 1:8 |
| Number of Pieces | 2509 |
| Material | Plastic (Odorless, soft ABS eco-friendly) |
| Dimensions (Assembled) | Approx. 68 cm (26.8 in) Length x 20 cm (7.9 in) Width x 14 cm (5.5 in) Height |
| Package Dimensions | 32 cm Length x 29 cm Width x 24 cm Height |
| Package Weight | 3.253 kg |
| Recommended Age | 14+ years, 18+ years |
| Certification | CE |
| Power Source (RC Version) | 2.4G Lithium Battery (USB rechargeable) |
| Control Type (RC Version) | 2.4G High-Frequency Remote Control |


5. Assembly Instructions
Your RASTAR F1 Red Bull RB19 model comes with a comprehensive paper instruction manual. Please follow the step-by-step diagrams and instructions provided in the manual for accurate assembly.
5.1 General Assembly Tips
- Organize your pieces: Before starting, sort the building blocks by color, size, or type to make the assembly process smoother.
- Follow the manual: Refer to the included paper instruction manual for detailed, step-by-step guidance.
- Take your time: Building complex models requires patience. Do not rush the process.
- Check connections: Ensure all blocks are firmly connected to prevent the model from falling apart.

5.2 Motor Set Assembly (RC Version Only)
If you have the RC version, integrate the motors and battery components as instructed in the dedicated sections of your paper manual. Pay close attention to wiring and connection points.

5.3 Sticker Application
Once the model is assembled, apply the provided stickers to add realistic details, such as sponsor logos and car numbers (1 and 11), as shown in the manual or reference images.

6. Operating Instructions (RC Version Only)
For models equipped with motors and remote control, follow these steps to operate your F1 Red Bull RB19 car:
- Charge the Battery: Before first use, fully charge the 2.4G lithium battery using the provided USB charging cable. To access the battery, remove the fixing pins on both sides of the car's cover and lift it.
- Activate the Car Battery: Press the battery start switch. A green light should flash. If a blue light flashes during the on/off process, press and hold the battery box button for approximately 5 seconds to switch back to the green light mode.
- Prepare the Remote Control: Set the remote control to the 'U' gear.
- Pair and Operate: Press any button on the remote control. The car's green light should flash continuously, indicating successful pairing. You can now control the car's forward, backward, left, and right steering movements.


7. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe dust and dirt from the model. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Battery Care (RC Version):
- Always fully charge the lithium battery before storage if not used for an extended period.
- Do not overcharge or completely discharge the battery.
- If the model will not be used for a long time, remove the battery from the car and store it separately.
- Inspecting Connections: Periodically check that all building blocks are securely connected, especially if the model is frequently handled or operated.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing parts (motors, remote, blocks) | Packaging error or lost during transit. | Immediately check all package contents against the manual. Contact the seller or manufacturer for replacement parts. |
| Missing assembly manual (especially for motors) | Manual not included or misplaced. | Contact the seller or manufacturer to request a digital copy of the manual or specific motor assembly instructions. |
| RC car not responding to remote control | Battery low/dead, remote not paired, loose connections, motor malfunction. |
|
| Car battery light is blue instead of green | Incorrect mode selected. | Press and hold the battery box button for about 5 seconds to switch back to green light mode. |
9. User Tips
- Verify Contents: Always check the package contents immediately upon arrival to ensure all pieces, motors, and manuals are present. This helps in quickly resolving any discrepancies.
- Organize During Assembly: Use small containers or trays to sort the numerous building blocks. This can significantly speed up the assembly process and prevent loss of small parts.
- Patience is Key: Building a 2509-piece model can be time-consuming. Enjoy the process and take breaks as needed.
- Keep Manual Safe: Store the paper instruction manual in a safe place for future reference, especially for troubleshooting or re-assembly.
10. Warranty and Support
For any issues regarding missing parts, defective components, or assembly difficulties not covered in this manual, please contact the seller or manufacturer directly. Refer to the contact information provided in your original purchase documentation or on the product packaging.
This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.