1. Introduction
Thank you for choosing the Recordio GAX-M8 Professional 8-Channel Mixing Console. This mixer is designed for high-quality audio mixing with features like Bluetooth connectivity, USB/SD card playback, digital DSP effects, and phantom power. This manual provides essential information for safe and effective use of your new audio mixer.
Video: Overview of the Recordio GAX-M8 mixer and its features.
2. Safety Information
- Read all instructions carefully before operating the device.
- Keep the device away from water or moisture.
- Do not open the casing; refer all servicing to qualified personnel.
- Ensure proper ventilation to prevent overheating.
- Use only the provided power adapter or a compatible replacement.
- Always turn off the mixer and disconnect from power before making connections or cleaning.
- Avoid placing heavy objects on the mixer.
3. Package Contents
Verify that all items are present in your package:
- Recordio GAX-M8 8-Channel Mixing Console
- Power Adapter (US/EU plug options available)
- Instruction Manual
Image: The GAX-M8 mixer, power cable, and instruction manual as received in the package.
4. Product Overview
Front Panel Controls
Image: Left side controls of the mixer, detailing input jacks, EQ, FX, and channel faders.
Image: Right side controls of the mixer, detailing MP3/Bluetooth section, effects, and main output controls.
- MIC Input Jacks: For connecting microphones.
- LINE Input Jacks: For connecting line-level audio sources.
- TRIM Control: Adjusts the input gain for each channel.
- Equalizer (HIGH, MID, LOW): 3-band EQ for tone shaping on each mono channel.
- FX Control: Adjusts the amount of effect sent from the channel.
- CLIP LED: Indicates when the input signal is too high (clipping).
- PAN Control: Adjusts the stereo position of the channel.
- Channel Fader: Controls the volume level of each individual channel.
- MP3 Player Jack: For USB/SD card input.
- Effector Display: Shows the current DSP effect number.
- Bluetooth: Button to activate Bluetooth mode.
- PHONES Jack: Headphone output.
- MAIN MIX Fader: Controls the overall output volume.
- FX Send Fader: Controls the overall effect send level.
- PHANTOM +48V Switch: Activates phantom power for condenser microphones.
- ROOM OUT Jacks: Output for control room monitors.
- MAIN OUTPUTS (L, R) Jacks: Main stereo output.
Rear Panel Connections
Image: Rear panel connections including power input and speaker outputs.
- POWER Switch: Turns the mixer on/off.
- AC INPUT/FUSE: Power input for the AC adapter.
- SPEAKER OUTPUT (RIGHT/LEFT): Connects to passive speakers.
- GND: Ground connection point.
- HOT AIR EXHAUST: Ventilation for cooling.
5. Setup
-
Power Connection:
- Ensure the mixer's power switch is in the OFF position.
- Connect the provided power adapter to the AC INPUT/FUSE on the rear panel.
- Plug the power adapter into a suitable wall outlet (220V-240V, 50-60Hz).
Image: Available power adapter plug types (US and EU).
-
Input Connections:
- Connect microphones to the MIC Input Jacks (XLR). If using condenser microphones, activate the +48V Phantom Power switch.
- Connect line-level devices (e.g., keyboards, CD players) to the LINE Input Jacks (1/4" TRS).
Image: Connecting an XLR microphone and enabling +48V phantom power.
-
Output Connections:
- Connect your main speakers to the MAIN OUTPUTS (L, R) jacks.
- Connect control room monitors to the ROOM OUT jacks.
- Connect headphones to the PHONES jack for monitoring.
- For speaker outputs, connect to OUTPUT A and OUTPUT B on the rear panel. Note the warning regarding minimum impedance of 4 ohms per channel and connecting two 4 ohm speakers per channel. Always use 8 ohm speakers or higher if connecting two speakers per channel.
- Power On: Once all connections are secure, switch the POWER button to the ON position.
6. Operating Instructions
Basic Mixing
- Adjust individual channel volumes using the Channel Faders.
- Use the TRIM control to set appropriate input levels, ensuring the CLIP LED does not light up frequently.
- Shape the tone of each channel with the 3-band Equalizer (HIGH, MID, LOW).
- Adjust the stereo image using the PAN control.
- Control the overall output volume with the MAIN MIX Fader.
USB/SD Card Playback & Recording
Image: Step-by-step guide for USB/SD playback, recording, and DSP effect usage.
- Insert a USB drive or SD card into the MP3 Player Jack.
- The display will show 'U-Disk' or 'SD'. Use the navigation buttons (Previous/Next) to select tracks.
- Press the 'Play/Pause' button to start or stop playback.
- To record to a U-Disk, press the 'REC' button. The display will show 'Recording Status'. Press 'REC' again to stop.
Bluetooth Connectivity
- Press the Bluetooth button on the mixer. The display will show 'Bluetooth Mode' and 'LED flash fast'.
- On your mobile device, search for Bluetooth devices and select 'Bluetooth'.
- Once connected, the display will show 'CONNECT success' and 'LED ON'.
- You can now play audio from your mobile device through the mixer.
DSP Effects
- The mixer features 16 built-in DSP effects.
- Use the PROGRAM (PUSH) knob to cycle through the effects. The Effector Display will show the effect number.
- Press the PROGRAM (PUSH) knob to confirm your selection.
- Adjust the effect level for each channel using the FX Control knob on that channel.
- Adjust the overall effect return level using the FX Send Fader.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Do not use liquid cleaners or solvents.
- Storage: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Ensure the hot air exhaust on the rear panel is not obstructed during operation.
- Power Cord: Regularly check the power cord for any damage. If damaged, replace it with an approved cord.
8. Troubleshooting
- No Power:
- Check if the power cable is securely connected to the mixer and the wall outlet.
- Ensure the power switch is in the 'ON' position.
- Verify the wall outlet is functioning by plugging in another device.
- No Sound Output:
- Check all input and output cable connections.
- Ensure channel faders and the MAIN MIX fader are raised.
- Verify that connected speakers are powered on and functioning.
- Check if any 'MUTE' switches are engaged on active channels.
- Distorted Sound:
- Reduce the TRIM control for the input channel if the CLIP LED is frequently lighting up.
- Lower the volume of the input source.
- Check speaker impedance compatibility (refer to rear panel warning).
- Bluetooth Connection Issues:
- Ensure the mixer is in Bluetooth pairing mode.
- Make sure your mobile device's Bluetooth is enabled and visible.
- Try restarting both the mixer and your mobile device.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | GAX-M8 |
| Type | Mixers, Audio Sound Mixer, USB / Bluetooth Mixer |
| Input Channels | 8 channels |
| Power Source | DC |
| Inbox Adaptor | Yes |
| Built-in Battery | No |
| Phantom Supply Voltage | +48 V |
| Mono Channel EQ | 3-Band (HIGH, MID, LOW) |
| DSP Effects | 16 professional effects |
| Connectivity | USB, Bluetooth |
| Display | LCD display MP3, Kinetic Level Lamp Display |
| Dimensions (L x W x H) | 37 x 32 x 10 cm (approx. 14.5 x 12.6 x 3.9 inches) |
| Weight | 7.5 kg (approx. 16.5 lbs) |
| Material | Metal + Plastic |
| Application | Disco, Bar, Club, Home, Portable/Household/Studio |
| Certification | CE |
Image: Dimensions of the GAX-M8 mixer.
10. User Tips
- Read the Manual: Always refer to this instruction manual for detailed information on features and troubleshooting.
- Gain Staging: Properly set the TRIM control for each input to avoid clipping and ensure a clean signal. The CLIP LED is your guide.
- Speaker Matching: Pay attention to speaker impedance requirements as noted on the rear panel to prevent damage to the mixer and speakers.
- Experiment with Effects: The 16 DSP effects offer a wide range of sound enhancements. Take time to experiment with different effects and parameters to find the best sound for your application.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.