1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your FGHGF Fingerprint USB 3.0 Flash Drive. This device is designed to offer secure and convenient data storage with advanced biometric authentication.
Key features include a high-tech IC fingerprint module for fast and sensitive unlocking, durable zinc alloy construction, and a high-speed USB 3.0 interface for efficient data transfer. It allows for privacy management by separating public and encrypted storage partitions.

2. Setup and Fingerprint Registration
Initial setup, including fingerprint registration and partition management, requires a computer running a Windows operating system. Apple's computer systems are not compatible for this initial setup process.
- Connect the Device: Insert the USB flash drive into a USB port on your Windows computer. The system should automatically recognize the device and display a "UserTool" program along with a public disk partition.
- Launch UserTool: Double-click to open the "UserTool" program. The interface for fingerprint management will be displayed.
- Register Administrator Fingerprint: Select a fingerprint slot to designate as the administrator's fingerprint. Continuously press your finger on the U-disk's fingerprint sensor area for 6 times. The fingerprint image on the program interface will fill with green, indicating successful registration.
- Add Additional Fingerprints: To register more fingerprints for encryption, click the '+' button. Enter a user name (e.g., FP1). Verify the administrator's fingerprint. After verification, press the finger on the U-disk's fingerprint area for 6 times. The operation of registering a new fingerprint is the same as that of entering the administrator's fingerprint. All fingerprints can also be deleted and reset. If so, select FP1 then click '-'.
- Manage Storage Partitions (Optional): By default, the U-disk capacity is evenly allocated between a public part and an encrypted part. You can re-divide these storage capacities as needed. To do this, after administrator fingerprint verification in the "UserTool" program, click "Storage Partition" to enter the interface and adjust the sizes of the public and encrypted partitions. It is strongly recommended to perform storage partition management during the initial setup.

3. Operating Instructions
Once the fingerprint is registered and partitions are set up, using the flash drive is straightforward.
- Accessing Data: Insert the USB flash drive into a compatible device (Windows, Mac OS, or Android 6.0+).
- Unlocking Encrypted Partition: To access the encrypted partition, place your registered finger on the fingerprint sensor. The drive will unlock quickly, typically within a few seconds, allowing access to your secure files.
- Data Transfer: Drag and drop files to and from the public or unlocked encrypted partitions as you would with any standard USB drive. The USB 3.0 interface ensures high-speed data transmission.


4. Maintenance
To ensure the longevity and optimal performance of your Fingerprint USB Flash Drive, follow these maintenance guidelines:
- Keep Dry: Avoid exposing the device to water or high humidity.
- Temperature Control: Store and operate the drive within recommended temperature ranges. Avoid extreme heat or cold.
- Handle with Care: The zinc alloy casing is durable, but avoid dropping or subjecting the drive to strong impacts.
- Clean Sensor: If fingerprint recognition becomes inconsistent, gently wipe the fingerprint sensor with a soft, dry, lint-free cloth.
- Safe Removal: Always safely eject the USB drive from your computer before physically removing it to prevent data corruption.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drive not recognized by computer. | Loose connection, faulty USB port, driver issue. | Try a different USB port or another computer. Ensure the drive is fully inserted. Check device manager for driver issues. |
| Fingerprint recognition fails or is inconsistent. | Dirty sensor, improperly registered fingerprint, incorrect finger placement. | Clean the fingerprint sensor with a soft cloth. Ensure your finger is clean and dry. Try re-registering your fingerprint via the "UserTool" program on a Windows PC. Ensure proper finger placement covering the sensor. |
| Cannot perform initial setup on Mac OS. | Incompatibility for initial setup. | Initial setup (fingerprint registration, partition management) must be done on a Windows operating system. Once set up, the drive can be used for data transfer on Mac OS. |
| Color of item in picture differs from actual product. | Light reflection, display calibration differences. | This is a common occurrence due to photographic lighting and screen settings. The actual product color may vary slightly. |
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Fingerprint USB Flash Drive |
| Capacity | 32GB |
| Chip | IC Fingerprint Module |
| Material | Zinc Alloy |
| Interface Type | USB 3.0 (compatible with USB 2.0) |
| Supported Systems | Windows, Mac OS, Android 6.0 or above (Note: Initial setup requires Windows OS) |
| Application | Storage and backup of movies, music, pictures, documents, software, etc. |
| Color | Silver |
| Package Dimensions (L x W x H) | 13 cm x 9 cm x 3 cm |
| Package Weight | 0.057 kg |
| Package Contents | 1 x Fingerprint USB Flash Drive |
7. User Tips
- For maximum security, always use the encrypted partition for sensitive data.
- Regularly back up important data from your flash drive to another storage medium.
- Keep your registered fingerprints clean and dry for optimal recognition performance.
8. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your FGHGF Fingerprint USB 3.0 Flash Drive, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty purposes.