Jonsbo Q25

Contents

Jonsbo Q25 Wireless Earbuds Instruction Manual

Model: Q25

Introduction

Thank you for choosing the Jonsbo Q25 Wireless Earbuds. These earbuds feature advanced Bluetooth 5.1 technology, HiFi stereo bass, active noise cancellation, and a secure earhook design, making them ideal for sports and daily use. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your earbuds to ensure optimal performance.

Package Contents

  • 1x Pair of Q25 Wireless Earbuds
  • 1x Charging Case
  • 1x USB-C Charging Cable
  • 1x User Manual (this document)

Setup

1. Initial Charging

Before first use, ensure the earbuds and charging case are fully charged.

  • Connect the provided USB-C charging cable to the charging port on the case and to a power source.
  • The LED indicators on the charging case will show the charging status.
  • A 10-minute charge provides approximately 1 hour of playtime.
  • The earbuds themselves offer up to 5 hours of continuous playtime, and the charging case extends total playtime to 120 hours.
Q25 Earbuds and Charging Case with USB-C cable connected, showing charging times and phone pairing screen.
Figure 1: Charging the Q25 Earbuds and Case. Note the USB-C charging port and battery life indicators.

2. Pairing with Your Device (One-Step Auto Pairing)

The Q25 earbuds feature one-step auto-pairing for convenience.

  1. Take both earbuds out of the charging case. They will automatically power on and enter pairing mode.
  2. On your smartphone or Bluetooth-enabled device, open the Bluetooth settings.
  3. Search for "Q25" in the list of available devices and select it to connect.
  4. Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
Diagram showing earbuds being taken out of the case and a phone screen with 'Q25' selected in Bluetooth settings for one-step auto pairing.
Figure 2: One-Step Auto Pairing Process. The earbuds automatically connect to your device after being removed from the case.

Operating Instructions

1. Wearing the Earbuds

The Q25 earbuds are designed with secure earhooks for a stable fit, especially during physical activity.

  1. Put the ear hook over the back of your ear.
  2. Gently place the earbud into your ear canal.
  3. Adjust the earbud and hook until it fits properly and feels secure.
Three diagrams showing how to properly wear the earbud: 1. Put the ear hook on the back of your ear. 2. Place the earbud into your ear. 3. Get the earbud to fit properly.
Figure 3: Proper Wearing Technique for Secure Fit.

2. Multi-function Button Controls

Each earbud features a multi-function button for easy control of music playback, calls, and voice assistant activation.

Diagram illustrating the multi-function button controls on the earbud, including functions for calls, Siri, volume adjustment, track skipping, play/pause, and microphone.
Figure 4: Multi-function Button Controls.
Earbud Controls
ActionFunction
Single PressPlay/Pause music, Answer/End call
Double Press (Left Earbud)Previous Track
Double Press (Right Earbud)Next Track
Long Press (Left Earbud)Volume Down
Long Press (Right Earbud)Volume Up
Triple PressActivate Voice Assistant (Siri, Google Assistant)

Maintenance

1. Cleaning

  • Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
  • Do not use abrasive cleaners, solvents, or aerosol sprays.
  • Ensure charging contacts on both earbuds and case are free from dust and debris.

2. Waterproofing (IP7 Rating)

The Q25 earbuds are IP7 waterproof, meaning they are protected against immersion in water up to 1 meter for up to 30 minutes. They are sweat-resistant and splashproof, making them suitable for workouts and rainy conditions.

  • Do not intentionally submerge the charging case in water.
  • Ensure earbuds are dry before placing them back into the charging case to prevent damage.
  • Avoid exposure to saltwater or other corrosive liquids.
Image showing two earbuds with water droplets, indicating 'Sweatproof & IP7 Waterproof'. Text below says 'Rainy Day', 'Sweat Resistance', 'Splashproof'.
Figure 5: IP7 Waterproof Rating for Earbuds.

3. Storage

  • When not in use, store the earbuds in their charging case to protect them and keep them charged.
  • Store in a cool, dry place away from extreme temperatures.

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Earbuds not pairingEarbuds not in pairing mode, Bluetooth off on device, out of range.Ensure earbuds are out of the case. Turn Bluetooth off and on again on your device. Move closer to your device. Try resetting the earbuds (refer to advanced troubleshooting if needed).
Only one earbud workingEarbuds not properly connected to each other or device.Place both earbuds back in the charging case, then take them out again simultaneously. Re-pair with your device.
No sound or low volumeVolume too low, earbuds not properly seated, device volume low.Increase volume on both earbuds and your connected device. Ensure earbuds are worn correctly.
Charging case not chargingFaulty cable/adapter, dirty charging port.Try a different USB-C cable and power adapter. Clean the charging port on the case.
Poor sound qualityInterference, low battery, ear tips not sealing properly.Move away from sources of interference. Charge earbuds fully. Adjust ear tips for a better seal.

Specifications

Technical Specifications
FeatureDetail
ModelQ25
Bluetooth VersionV5.1 + EDR
Bluetooth ChipJerry 6973
Supported ProtocolsAVRCP V1.6, A2DP V1.3, HFP V1.7 (Simultaneous LE and BR / EDR)
Earbud Battery Capacity50mAH
Charging Case Battery Capacity500mAH
Playback/Talk TimeApprox. 10 hours (earbuds)
Total Playtime (with case)Up to 120 hours
Charging TimeApprox. 1 hour
Standby Time80 hours
Bluetooth Effective Range≤10 meters
Speaker PowerRated 3mW
Frequency Response50Hz-20KHz
MaterialABS
Waterproof RatingIP7
Product Dimensions (Case)90mm x 70mm x 30mm (3.54 x 2.76 x 1.18 inches)
Exploded view of an earbud showing internal components, with text 'Clear voice HIFI lossless sound quality'.
Figure 6: Internal Components and HiFi Sound Quality.
Close-up of an earbud showing a circuit board design, with text 'Advanced BT 5.1 transmission technology, 12 meters of transmission distance stable connection, no delay continuous line'.
Figure 7: Bluetooth 5.1 Transmission Technology.
Image of the earbuds and charging case with dimensions indicated: 9cm x 7cm x 3cm.
Figure 8: Product Dimensions.

User Tips

No specific user tips were available from provided reviews or Q&A data. General tips for wireless earbuds include:

  • For optimal sound quality and noise cancellation, ensure you select the correct size ear tips that provide a good seal in your ear canal.
  • Regularly clean the ear tips and mesh to prevent wax buildup, which can affect sound quality.
  • If experiencing connection issues, try restarting both your device and the earbuds.

Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.