1. Important Safety Information
⚠ WARNING: Please read all safety warnings and instructions carefully before use. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- Disposal: For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Always use appropriate personal protective equipment (PPE) when handling batteries.
- Do not short-circuit the battery terminals.
- Do not expose the battery to extreme temperatures, direct sunlight, or fire.
- Keep the battery away from water and moisture.
- Do not disassemble, crush, or puncture the battery.
- Ensure proper ventilation when charging or discharging the battery.
2. Product Overview
The PowMr 12.8V 200AH LiFePO4 Battery Pack is a high-performance, rechargeable lithium iron phosphate battery designed for various applications including RVs, marine, solar energy storage, and off-grid systems. It features a built-in Battery Management System (BMS) for enhanced safety and longevity.

3. Setup and Installation
3.1 Unboxing
Carefully remove the battery pack from its packaging. Inspect the battery for any signs of damage during transit. The package includes one lithium battery, two terminals, and two screws.
3.2 Physical Dimensions and Weight
- Dimensions (L×W×H): 485mm × 170mm × 240mm
- Weight: 19.5KG

3.3 Terminal Connection
- Terminal Type: M8
- Terminal Torque: 8.5NM
Ensure all connections are secure and properly torqued to prevent loose connections and potential hazards. Connect positive to positive and negative to negative.
3.4 Series and Parallel Connection
The battery supports both series and parallel connections to expand voltage and capacity. You can connect a maximum of 4 batteries in series and a maximum of 4 batteries in parallel.
- Maximum in Parallel: 4 units (up to 800Ah)
- Maximum in Series: 4 units (up to 51.2V)


4. Operating Instructions
4.1 Charging the Battery
Use a compatible LiFePO4 charger or solar charging system. The battery supports a 50A charging current (for 100AH model, 100A for 200AH model).
- Recommended Charge Voltage: 14V
- Max Charge Voltage: 14.6V
- Recommended Charge Current: 100A
- Max Continuous Current: 200A


4.2 Discharging the Battery
The battery is designed for prolonged discharge and long-duration loads.
- Recommend Discharge Voltage: 11.2V
- Max Discharge Voltage: 10.8V
- Max Discharge Current: 300A
- Peak Discharge Current: 250A/3S

4.3 Battery Management System (BMS)
The integrated BMS provides comprehensive protection for the battery:
- Overvoltage Protection
- Undervoltage Protection
- Overcurrent Protection
- Short Circuit Protection
- Overtemperature Protection
- Cell Voltage Self-Balancing
- Low-Temperature Charging Protection


5. Maintenance
- Storage Temperature: (-2 to 45)℃
- Charge Temperature: (0 to 55)℃
- Discharge Temperature: (-2 to 55)℃
- Self-Discharging Per Month: <3%
To ensure optimal performance and longevity:
- Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid prolonged storage at a completely discharged state. It is recommended to store the battery at approximately 50% State of Charge (SOC).
- Regularly check terminal connections for tightness and corrosion.
- Clean the battery casing with a dry cloth as needed.
6. Troubleshooting
If you encounter issues with your PowMr LiFePO4 battery, consider the following:
- Battery not charging: Check all connections to the charger and battery. Ensure the charger is compatible and functioning correctly. Verify the charging temperature is within the specified range (0 to 55)℃.
- Battery not discharging/powering devices: Check all load connections. Ensure the battery is sufficiently charged. The BMS may have activated a protection mode (e.g., undervoltage, overcurrent, overtemperature). Disconnect the load, allow the battery to rest, and then attempt to charge it.
- Unusual heat or smell: Immediately disconnect the battery from all loads and chargers. Do not attempt to use the battery. Contact customer support.
- Reduced capacity: Ensure the battery has undergone a few full charge/discharge cycles to calibrate. Verify that the operating temperatures are within the recommended range.
7. Specifications
| Attribute | Value |
|---|---|
| Battery Model | POW-200AH-12.8V |
| Battery Type | LiFePO4 |
| Voltage | 12.8V |
| Nominal Capacity | 200AH |
| Energy Density | 2560WH |
| Dimensions (L×W×H) | 485*170*240mm |
| Weight | 19.5KG |
| Terminal Type | M8 |
| Terminal Torque | 8.5NM |
| Case Material | ABS |
| BMS Built-in | YES |
| AH Efficiency-round trip | >98% |
| Self-Discharging Per Month | <3% |
| Max in Parallel | 4 |
| Max in Series | 4 |
| Voltage Window | 10.8-14.6V |
| Recommend Charge Voltage | 14V |
| Max Charge Voltage | 14.6V |
| Recommend Charge Current | 100A |
| Max Continuous Current | 200A |
| Recommend Discharge Voltage | 11.2V |
| Max Discharge Voltage | 10.8V |
| Max Discharge Current | 300A |
| Peak Discharge Current | 250A/3S |
| Cycle Life | 6000+ Cycles |
| Discharge Temperature | (-2 to 55)℃ |
| Charge Temperature | (0 to 55)℃ |
| Storage Temperature | (-2 to 45)℃ |
8. Warranty and Support
8.1 Warranty
The PowMr 12.8V 200AH LiFePO4 Battery Pack comes with a 5-year warranty and a 10-year design life, ensuring long-term reliability and performance.

8.2 Customer Support
For any questions or issues, PowMr provides customer support to help resolve problems within 24 hours.
9. User Tips
- LiFePO4 vs. Lead-Acid: This LiFePO4 battery offers significantly longer cycle life (6000+ cycles vs. ~500 for lead-acid), lighter weight (1/3 of lead-acid), and higher usable capacity in the same size, making it a superior choice for most applications.
- Optimal Charging: While the battery supports a maximum continuous charge current of 200A, a recommended charge current of 100A (0.5C) is suggested for optimal lifespan.
- Versatile Applications: This battery is highly versatile and can be used in various scenarios such as PV systems, yachts, RVs, and as a reliable power source during outages.