YANFU Mars 68 PRO

Contents

Mars 68 PRO Gaming Keyboard User Manual

Model: Mars 68 PRO

1. Introduction

Thank you for choosing the Mars 68 PRO Gaming Keyboard. This high-performance mechanical keyboard features advanced magnetic axis switches, customizable RGB lighting, and versatile wired/wireless connectivity options, designed to enhance your gaming and typing experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your new keyboard.

2. Key Features

  • Magnetic Axis Mechanical Switches: Offers full-range 0.01mm accuracy and speed trigger for instant response and customizable actuation points.
  • Hot-Swappable Design: Supports full-key mixing axis function, allowing for arbitrary replacement of compatible magnetic shafts to optimize user experience.
  • High Performance: Equipped with a flagship MCU chip, 64kHz full-key scanning sampling rate, and an 8KHz return rate (wired) for ultra-low latency as low as 0.125ms.
  • Wired & Wireless Connectivity: Supports USB wired, Bluetooth, and 2.4G wireless modes for flexible usage across various devices.
  • Dynamic RGB Lighting: Features independent ARGB lighting with IC500Hz high brush for smooth, vibrant, and customizable lighting effects.
  • Durable Keycaps: PBT side-engraved translucent keycaps provide durability and allow RGB light to shine through.
  • Long-lasting Battery: Integrated 3750mAh lithium battery provides up to 20 hours of continuous use in wireless mode.
  • Advanced Algorithm: Self-developed gturbomagnetic shaft algorithm with built-in temperature sensor ensures stable and accurate performance, adapting to temperature changes.
  • Customizable Software: Web-based and client-based drivers for comprehensive customization of key functions, lighting, and performance settings.

3. Setup Guide

3.1 Package Contents

Please ensure all items are present:

  • Mars 68 PRO Gaming Keyboard
  • USB Cable
  • Wireless Receiver (if applicable for 2.4G mode)
  • Keycap Puller (optional, for maintenance)
  • Switch Puller (optional, for maintenance)

3.2 Connecting the Keyboard

The Mars 68 PRO supports three connection modes: Wired (USB), Bluetooth, and 2.4G Wireless.

Wired Connection:

  1. Connect the provided USB cable to the keyboard's USB-C port.
  2. Plug the other end of the USB cable into an available USB port on your computer.
  3. The keyboard will be automatically recognized by your operating system.

2.4G Wireless Connection:

  1. Locate the 2.4G wireless receiver (USB dongle) usually stored in a slot on the keyboard or included in the package.
  2. Plug the 2.4G receiver into an available USB port on your computer.
  3. Switch the keyboard to 2.4G wireless mode (refer to the keyboard's function keys or switch for mode selection, typically marked with a 2.4G icon or 'G').
  4. The keyboard should automatically pair with the receiver.

Bluetooth Connection:

  1. Switch the keyboard to Bluetooth mode (refer to the keyboard's function keys or switch for mode selection, typically marked with a Bluetooth icon or 'B').
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. Select "Mars 68 PRO" (or similar name) from the list of available devices to pair.
  4. Follow any on-screen prompts to complete the pairing process.

3.3 Driver Installation

The Mars 68 PRO keyboard utilizes a self-developed dual-ended driver, available as a web-based or client-based application. This software allows for advanced customization.

  • Web Driver: Access the web-based driver through your internet browser. Specific URL will be provided by the manufacturer or found on the product packaging.
  • Client Driver: Download and install the client software from the official product support page.

These drivers enable you to:

  • Customize key assignments and macros.
  • Adjust RGB lighting effects and colors.
  • Fine-tune magnetic switch actuation points (0 dead zone adjustment).
  • Update keyboard firmware.
Screenshot of the Mars 68 PRO keyboard driver software interface.
Figure 3.3.1: Web/Client Driver Interface for customization.

4. Operating Instructions

4.1 Basic Keyboard Functions

The Mars 68 PRO is a 68-key layout keyboard. Standard key functions operate as expected. Refer to the keycap legends for primary and secondary functions (accessed via the 'Fn' key).

4.2 RGB Lighting Control

The keyboard features customizable ARGB lighting. Lighting effects can be adjusted directly on the keyboard using specific key combinations (often involving the 'Fn' key and arrow keys or dedicated lighting keys) or through the dedicated driver software.

  • On-board Control: Consult the keyboard's quick guide or experiment with 'Fn' + various keys (e.g., 'Fn' + '\|', 'Fn' + 'Ins', 'Fn' + 'Del', 'Fn' + 'PgUp', 'Fn' + 'PgDn') to cycle through lighting modes, adjust brightness, or change colors.
  • Software Control: For advanced customization, use the web or client driver to select from a wide range of effects, create custom profiles, and synchronize lighting.
Close-up of the Mars 68 PRO keyboard showcasing its vibrant ARGB lighting.
Figure 4.2.1: ARGB lighting with independent ICs for smooth effects.

4.3 Magnetic Switch Adjustment (0 Dead Zone)

The magnetic switches allow for precise adjustment of actuation points, including a '0 dead zone' setting for rapid triggering. This can be configured via the driver software.

  • Open the driver software (web or client).
  • Navigate to the switch settings or actuation point adjustment section.
  • Adjust the actuation point for individual keys or groups of keys.
  • For competitive gaming, the '0 dead zone' setting can be enabled, though it is recommended to raise the lift at the 0 dead zone to set the accuracy to 0.1 for optimal performance and to prevent accidental triggers.
Image illustrating the 0.01mm full range speed trigger of the magnetic switches.
Figure 4.3.1: Full range 0.01mm speed trigger for instant emergency stop.

4.4 Charging and Battery Life

For wireless models, the keyboard is equipped with a 3750mAh lithium battery.

  • To charge, connect the keyboard via the USB cable to a powered USB port.
  • A full charge provides approximately 20 hours of continuous use. Actual battery life may vary based on usage, lighting settings, and other factors.
  • The keyboard may have an LED indicator to show charging status or low battery.
Image showing a battery icon and text indicating 3750mAh lithium battery with up to 20 hours of life.
Figure 4.4.1: 3750mAh lithium battery for extended wireless use.

5. Maintenance

5.1 Cleaning the Keyboard

  • Disconnect the keyboard from your computer before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and chassis.
  • For deeper cleaning, use a keycap puller to remove keycaps and compressed air to clear debris from underneath.
  • Avoid spraying liquids directly onto the keyboard.

5.2 Replacing Keycaps and Switches

The Mars 68 PRO features hot-swappable magnetic switches and PBT keycaps, allowing for easy customization and replacement.

  • Keycap Replacement: Use a keycap puller to gently remove keycaps. Align new keycaps and press down firmly until they click into place.
  • Switch Replacement: Use a switch puller to carefully remove magnetic switches. Ensure the new switch is correctly oriented before pressing it into the socket. Do not force switches, as this can damage the PCB.
Image showing different types of magnetic switches and the hot-swappable design.
Figure 5.2.1: Full key mixing axis function with adaptable magnetic shafts.

6. Troubleshooting

6.1 Keyboard Not Responding

  • Wired: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4G Wireless: Check if the 2.4G receiver is properly plugged in and the keyboard is in 2.4G mode. Ensure the keyboard battery is charged.
  • Bluetooth: Verify Bluetooth is enabled on your device and the keyboard is paired. Re-pair the keyboard if necessary. Ensure the keyboard battery is charged.
  • All Modes: Restart your computer. Try connecting the keyboard to another computer to rule out system-specific issues.

6.2 Lighting Issues

  • If RGB lighting is not working or is incorrect, check the lighting settings in the driver software.
  • Ensure no conflicting software is running that might override keyboard lighting.
  • Try resetting the keyboard to factory default settings (refer to driver software or manufacturer's website for instructions).

6.3 Keys Not Registering or Double-Typing

  • Clean around the affected key to remove any debris.
  • If using magnetic switches, check the actuation point settings in the driver software. Adjusting the '0 dead zone' setting might resolve issues related to over-sensitivity or under-registration.
  • Consider replacing the affected magnetic switch if the issue persists after cleaning and software adjustment.

7. Specifications

FeatureDescription
Product NameMars 68 PRO Gaming Keyboard
BrandYANFU
Keyboard Standard68 keys
Operation StyleMechanical (Magnetic Axis)
Interface TypeUSB (Wired), Bluetooth, 2.4G Wireless
Backlight TypeMulticolor (ARGB)
Polling Rate8KHz (Wired), 1KHz (2.4G Wireless)
Sampling Rate64KHz Full Key Scanning
RT AccuracyFull range 0.01mm
Transmission Delay0.125ms (Wired), 0.1ms (2.4G Wireless)
Battery (Wireless models)3750mAh Lithium Battery (up to 20 hours)
Keycap MaterialPBT Side Engraved Translucent Keycaps
Wrist SupportNo
ApplicationDesktop, Laptop
Compatible PlatformWindows
CertificationCE
Internal FillingPo cotton + EDPM bottom
Product parameters table for Mars 68 series keyboards.
Figure 7.1.1: Detailed product parameters for Mars 68 keyboard series.

8. User Tips

  • Actuation Point Customization: Experiment with different actuation points for your magnetic switches using the driver software. A shallower actuation point can provide faster response for gaming, while a deeper one might reduce accidental presses for typing.
  • 0 Dead Zone Setting: While the '0 dead zone' offers extreme responsiveness, consider setting the accuracy to 0.1mm in the software. This can help prevent unintended inputs during intense gameplay by providing a minimal buffer.
  • Firmware Updates: Regularly check the manufacturer's website or the client driver for firmware updates. Updates can improve performance, add new features, or fix bugs.
  • Battery Management: For wireless use, consider turning off RGB lighting or reducing brightness to extend battery life. Charge the keyboard fully before long gaming sessions.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official YANFU website or contact your retailer. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.